Friends! please help and WS6 kill.

[fastang]

Originally posted by Unit 5302
Putting 1.7RR's on your B cam will basically turn it into an F cam. .514 lift 224* (plus just a little more duration at .500. Meaning you're pretty damn close to the .512 226* F cam. That's probably what I'd do to give you some more power with that combo.

What gears do you have now? You don't have the stock gearing do you?

I know about the 1.7's I used to have crane 1.7's on my stock heads with this cam before I did the head swap. I would much rather have the extra lift at the camshaft than the rocker though. The F cam will still have 2more degrees of lift than a B with 1.7's. Although a rocker swap is a lot easier to perform than a cam swap

Im running 355's right now and those are the same gears that MM&FF was using. Im going to swap to 410's very soon when I rebuild my rear end. I already have the gears, I just gotta stuff em in.

The only thing that I can think of about MM&FF's project car is that theyre using a Lentech AOD with a perfectly matched converter. Im using a Tremec 3550. Maybe the matched converter helped them out?