Interesting link - Page 2

PKRWUD · 08-12-2002, 01:51 AM

Quote:

Originally posted by rustang girl

EarleBishop42: No, we'll use our old 4 bolt pulley. [/B]

You are going to switch back to a V-belt??? I wouldn't. Your gonna have to use a different water pump, because the serpentine belt pump is a reverse direction pump.

Take care,
~Chris

rustang girl · 08-12-2002, 02:00 AM

Quote:

Originally posted by PKRWUD

You are going to switch back to a V-belt??? I wouldn't. Your gonna have to use a different water pump, because the serpentine belt pump is a reverse direction pump.

Take care,
~Chris

EarleBishop42: yes, we will use our old waterpump

EarleBishop42: unelss he has some suggestion as to how to implement our setup easily witht he serpantien that doesn't require us to replace the test or our acessories (or thier pulleys)

PKRWUD · 08-12-2002, 02:09 AM

Oh. I was under the impression that this engine was coming with the belt driven accessories on it.

Take care,
~Chris

rustang girl · 08-12-2002, 02:15 AM

Quote:

Originally posted by PKRWUD
Oh. I was under the impression that this engine was coming with the belt driven accessories on it.

Take care,
~Chris

EarleBishop42: no
EarleBishop42: otherwise we would have left it in place
EarleBishop42: (sans the flexplate and harmonic balancer)

PKRWUD · 08-12-2002, 02:25 AM

What are you going to do for a distributor?

rustang girl · 08-12-2002, 02:30 AM

Quote:

Originally posted by PKRWUD
What are you going to do for a distributor?

EarleBishop42: the old one

PKRWUD · 08-12-2002, 02:43 AM

Quote:

Originally posted by rustang girl
EarleBishop42: the old one

You're going to have to get a new gear for it. Your old one is cast, and the cam in the new engine is billet steel, and requires the distributor to have a matching billet steel gear. If you don't, the cast gear will get chewed up quickly.

Take care,
~Chris

induction · 08-12-2002, 02:50 AM

Check out PKRWUD hangin' with two of us in three rooms . !!!! lol

PKRWUD · 08-12-2002, 02:57 AM

Quote:

Originally posted by induction
Check out PKRWUD hangin' with two of us in three rooms . !!!! lol

Actually, I'm talking with her fiance through her. At least I think I am. I'm starting to get kinda confused.

Take care,
~Chris

rustang girl · 08-12-2002, 03:00 AM

Quote:

Originally posted by PKRWUD

Actually, I'm talking with her fiance through her. At least I think I am. I'm starting to get kinda confused.

Take care,
~Chris

I'm responding w/ what he responds with. Oh, and he hasn't really responded for that last message yet.

PKRWUD · 08-12-2002, 03:06 AM

Quote:

Originally posted by rustang girl
I'm responding w/ what he responds with. Oh, and he hasn't really responded for that last message yet.

He doesn't have to. Just make sure that gear gets changed before the distributor goes in. Chewed up pieces of cast iron floating around your valvetrain isn't a whole lot of fun.

Take care,
~Chris

induction · 08-12-2002, 03:12 AM

rustang girl · 08-12-2002, 03:16 AM

Quote:

Originally posted by PKRWUD

He doesn't have to. Just make sure that gear gets changed before the distributor goes in. Chewed up pieces of cast iron floating around your valvetrain isn't a whole lot of fun.

Take care,
~Chris

EarleBishop42: aye

Yeah, that wouldn't be a good thing.

I had pieces of metal from the cam cover in my first engine, caused a horrible oil leak. Took that in to find out what was wrong w/ it. That was the original 289. The previous owner messed it up when he put a new cam shaft in.

PKRWUD · 08-12-2002, 03:23 AM

I lost a carb nut down the intake of my 403 Buick, and these are the pieces I found in my oil pan (along with the cracked piston top, the bent rod, and a broken tranny yolk {from another night}):

rustang girl · 08-12-2002, 03:36 AM

Quote:

Originally posted by PKRWUD
I lost a carb nut down the intake of my 403 Buick, and these are the pieces I found in my oil pan (along with the cracked piston top, the bent rod, and a broken tranny yolk {from another night}):

Ours wasn't that bad. but there was a lot of it.

Yeah, I saw that pic once, on your site I believe.

EarleBishop42: ouch

induction · 08-12-2002, 03:41 AM

Can you say Gerande ? tell me you didn't pitch-poll the car when the drive shaft broke?

PKRWUD · 08-12-2002, 03:42 AM

It was cool though. It gave me the excuse to build the race engine for it.

Take care,
~Chris

rustang girl · 08-12-2002, 03:45 AM

Quote:

Originally posted by PKRWUD
It was cool though. It gave me the excuse to build the race engine for it.

Take care,
~Chris

hehehe I'd have to say that's a very good excuse.

08-12-2002, 02:09 AM	#3
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	Oh. I was under the impression that this engine was coming with the belt driven accessories on it. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

08-12-2002, 02:25 AM	#5
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	What are you going to do for a distributor? __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

08-12-2002, 02:50 AM	#8
induction The Brit! Join Date: Feb 2001 Location: Across the Pond! Posts: 694	Check out PKRWUD hangin' with two of us in three rooms . !!!! lol __________________ *Restored 1965 Coupe* *April Mare of the Month* RiceHatersClub Member #27

08-12-2002, 03:12 AM	#12
induction The Brit! Join Date: Feb 2001 Location: Across the Pond! Posts: 694	lol __________________ *Restored 1965 Coupe* *April Mare of the Month* RiceHatersClub Member #27

08-12-2002, 03:23 AM	#14
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	I lost a carb nut down the intake of my 403 Buick, and these are the pieces I found in my oil pan (along with the cracked piston top, the bent rod, and a broken tranny yolk {from another night}): __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

08-12-2002, 03:41 AM	#16
induction The Brit! Join Date: Feb 2001 Location: Across the Pond! Posts: 694	Can you say Gerande ? tell me you didn't pitch-poll the car when the drive shaft broke? __________________ *Restored 1965 Coupe* *April Mare of the Month* RiceHatersClub Member #27

08-12-2002, 03:42 AM	#17
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	It was cool though. It gave me the excuse to build the race engine for it. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finally dyno tests for the C&L plenum for 96-98 Gt's WITHOUT PI heads, link posted	96_4.6	Modular Madness	5	11-01-2003 12:43 PM
oil pan vs. drag link	ScottA40422	Classic Mustangs	0	08-08-2003 03:20 PM
Went to track....watched some interesting stuff	EZRIDN	Stang Stories	19	05-08-2001 01:32 AM
Fusible Link	Brian Browning	Classic Mustangs	0	02-16-2001 02:12 PM
Someone, link a TX streetracing site	90dpscoupe	Stang Stories	2	01-23-2001 01:49 PM