just got my offroad h-pipe & flowmasters

96GTfanatic · 08-25-2001, 05:03 PM

just got my 2 chamber american thunder exhaust as well as the bbk offroad h-pipe.
1. flowmasters went on VERY easily
2. got all but 1 singular darn bolt off the h-pipe...used impact wrench for 20 minutes still wouldnt come off so having someone put the new one on monday.
however, the flowmasters sounds absoultely amazing at idle, and around 2000rpm. although its not as loud at higher rpms. kinda disappointed but i know with time it will get louder

91LX2Bfast · 08-25-2001, 05:28 PM

The off-road H-pipe will make them scream at a high rpm, don't worry. I was kind of disappointed in my Flows sound at high rpm too at first. But once I put my o/r X-pipe on, it was the sound I had always wanted. Just wait for monday buddy.

------------------
1997 Thunderbird 4.6L: Dynomax cat-back, MN-12 perf. offroad downtubes and Y-pipe w/ Magnaflow resonator, 80mm MAF with cone filter, B&M trans cooler, Inject-Tech chip, KVR front brake upgrade. 15.2 @ 91 before exhaust. Not bad for a 3800lb auto 4.6L

No Longer own: 91 LX 5.0L 5 spd

Stang Runner · 08-25-2001, 05:51 PM

Well if you wanted Loud Edelbrock RPM's would be good you the high Loud rpm's

But flows are much better than stock!

------------------
14.28@103.0 on a G-Tech Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C
Drive Train: 3.55, World Class T-5,
NOW it is time for Real power STUFF I Have and will put on after I get everthing: Mac cold intake, 70MM TB, Valve covers (COOL ONES)255 Fuel pump.
Next to get: rocker arms,Cam,TFS Heads,Injectors 26,Holley intake, What might I need???

08-25-2001, 05:03 PM	#1
96GTfanatic Registered Member Join Date: Jul 2001 Location: Philadelphia Posts: 93	just got my offroad h-pipe & flowmasters just got my 2 chamber american thunder exhaust as well as the bbk offroad h-pipe. 1. flowmasters went on VERY easily 2. got all but 1 singular darn bolt off the h-pipe...used impact wrench for 20 minutes still wouldnt come off so having someone put the new one on monday. however, the flowmasters sounds absoultely amazing at idle, and around 2000rpm. although its not as loud at higher rpms. kinda disappointed but i know with time it will get louder

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
offroad H or X pipe??	03stangGT	Modular Madness	4	10-23-2003 04:49 PM
California Smog legal X or H pipe	shawv	Modular Madness	1	05-08-2002 05:51 PM
Off road pipe vs. Catalitic Pipe	Kamaro Killer	Windsor Power	7	04-04-2002 04:05 AM
Mac H pipe w cats vs BBK x pipe with cats??	Chevyguy	Windsor Power	15	11-16-2001 08:34 AM
Help with offroad h pipe	mustangLX92	Windsor Power	2	07-06-2001 09:12 AM

08-25-2001, 05:28 PM	#2
91LX2Bfast Registered Member Join Date: Dec 1999 Location: Warrington, PA Posts: 694	The off-road H-pipe will make them scream at a high rpm, don't worry. I was kind of disappointed in my Flows sound at high rpm too at first. But once I put my o/r X-pipe on, it was the sound I had always wanted. Just wait for monday buddy. ------------------ 1997 Thunderbird 4.6L: Dynomax cat-back, MN-12 perf. offroad downtubes and Y-pipe w/ Magnaflow resonator, 80mm MAF with cone filter, B&M trans cooler, Inject-Tech chip, KVR front brake upgrade. 15.2 @ 91 before exhaust. Not bad for a 3800lb auto 4.6L No Longer own: 91 LX 5.0L 5 spd

08-25-2001, 05:51 PM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	Well if you wanted Loud Edelbrock RPM's would be good you the high Loud rpm's But flows are much better than stock! ------------------ 14.28@103.0 on a G-Tech Engine: Steal Mounts, Under drive pulleys, K&N, Home ported Lower Intake, No power steering, No A/C Drive Train: 3.55, World Class T-5, NOW it is time for Real power STUFF I Have and will put on after I get everthing: Mac cold intake, 70MM TB, Valve covers (COOL ONES)255 Fuel pump. Next to get: rocker arms,Cam,TFS Heads,Injectors 26,Holley intake, What might I need???