What next?

98SNAKE · 11-11-2001, 12:26 PM

Ok maybe it's me but I just can't seem to break into the 12's. I went to the track yesterday, and it's not the best one around here. The starting line sucks and everytime I hit second gear I spin like mad. Granted that it was only about 55 degrees out and cloudey so the track was cold, I could only muster a 13.22@108.39 with a 2.060 60ft. I was also told that there MPH are 2.00 high. Which would make sense since my best MPH is 106.I also tried launching at 3,000 and 4,000 RPM's and I spun most of first gear. I droped my Nitto's to 20psi which I would assumed helped me. I ran a 13.12 with 32psi in my tires on a 75 degree day launching at 3,000 and shifting at 6,700 RPM's. So is it me or what, with the mods I have I feel I should run at least a 12.90. Also the track I ran a 13.12, when I hit second it pounds like I have slick's on at the worst they might cherp. Sorry for rambling on i'am just upset with my car right now

Any suggestions on what suspension mods to start out with. Thanks.

Will

SD Wheeler · 11-11-2001, 02:13 PM

You can't hook Nitto's on 20 psi. They need to be 16-17 psi and heat them for 8-10 seconds at about 5000 rpm.

You've got the mph to run 12's. Get the car to leave.

11-11-2001, 12:26 PM	#1
98SNAKE Registered Member Join Date: Apr 2001 Location: Sterling Heights,Michigan Posts: 129	What next? Ok maybe it's me but I just can't seem to break into the 12's. I went to the track yesterday, and it's not the best one around here. The starting line sucks and everytime I hit second gear I spin like mad. Granted that it was only about 55 degrees out and cloudey so the track was cold, I could only muster a 13.22@108.39 with a 2.060 60ft. I was also told that there MPH are 2.00 high. Which would make sense since my best MPH is 106.I also tried launching at 3,000 and 4,000 RPM's and I spun most of first gear. I droped my Nitto's to 20psi which I would assumed helped me. I ran a 13.12 with 32psi in my tires on a 75 degree day launching at 3,000 and shifting at 6,700 RPM's. So is it me or what, with the mods I have I feel I should run at least a 12.90. Also the track I ran a 13.12, when I hit second it pounds like I have slick's on at the worst they might cherp. Sorry for rambling on i'am just upset with my car right now Any suggestions on what suspension mods to start out with. Thanks. Will __________________ SOLD!!! 98Cobra Black on Black Coupe 4.30's DTS diff cover Eaton posi Moser 31 spline axles Spec Stage 2 clutch B&M Ripper shifter BBK off-road x-pipe Steeda pullies Steeda timing adj@14deg MAC cold air Best Time 12.9 @107.5 on street tires New Car 03 Cobra Not Stock Last edited by 98SNAKE; 11-11-2001 at 11:45 PM..

11-11-2001, 02:13 PM	#2
SD Wheeler "The Game" Join Date: Apr 1999 Location: Baytown, Texas USA Posts: 955	You can't hook Nitto's on 20 psi. They need to be 16-17 psi and heat them for 8-10 seconds at about 5000 rpm. You've got the mph to run 12's. Get the car to leave. __________________ SD Wheeler DTA Racing & Performance THE source for ModMax Components and Modular Power Packages FFW M/M #30-sponsored by Strictly Performance Moderator, Modular Motor & Big Block Forums Hardcore5.0

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: