Excessive Motorsports?

92Rustang · 03-13-2001, 06:34 PM

I have read a couple of post on how bad these guys are. I'm thinking about buying a motor from them. Should I?????

------------------
Check my site for mod
www.fordmustanggt.com

Unit 5302 · 03-13-2001, 07:24 PM

No. You shouldn't. Supporting a company that screws people over even if they don't screw you (you most likely will be) isn't right.

That's just my opinion. For more info go ahead and click "search" on the area just above the topics in this forum, it's on the right side. Search the "Performance Industry" forum. Search term "Excessive Motorsports."

That should be everything that you need to know about those a-holes. They screw people over, big time, again and again. It won't be soon enough when they go out of business.

------------------
1987 GT 5spd.
D&D Performance "Z" spec T-5
Dynomax 2.5" Super Turbo system
BBK 2 1/2" H-pipe with cats

84_GT350 · 03-13-2001, 08:05 PM

Every couple of months someone posts questions asking about these guys and every couple of months there are 30+ posts talking about how much they suck. Do yourself a favore and stay the hell away from them. They're practically in my backyard and I'd rather wait a couple weeks from a mail order company for my parts. What does that tell ya?

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

92Rustang · 03-13-2001, 08:28 PM

Thanks for the replies guys. I was search this forum and could not find anything. I searched the Performance Industry and found all the info I needed. I order a new motor form them last week and will be cancelling tomorrow. I don't want to take any chancing. I guess I'm going to go with CCM.

------------------
Check my site for mod
www.fordmustanggt.com

buddha · 03-13-2001, 09:21 PM

Make sure you call them ASAP. Don't be surprised it they try to charge you some sort of restocking fee, or some lame excuse of how they have already started building it. Hopefully this won't be the case.

Unit 5302 · 03-13-2001, 09:58 PM

I really doubt they will allow you to cancel without a restock fee.

What was the lead time they gave you?

Stang_ROTY · 03-13-2001, 10:04 PM

I bought a "Set" of "Red" fuel rails for a Cartech fuel system and they came Silver and they look a little used. Plus, I didn't get any fittings either. I will never buy from them again.

IMPULSERACING · 03-14-2001, 09:51 AM

They Suck! They Suck! They Suck!

Also, Their shipping Sucks!

------------------
92' LX Hatch 5 spd Edelbrock Performer Intake, pro-m 75mm MAF, 70mm T.B., 24lb injectors, 190lph, Mac fenderwall cold air induction, mallary ignition and coil, Cobra 1.7 rockers, 373:1 gear, upper and lower control arms, supersubs, 50/50's, front drag springs, no sway bar, battery in hatch, compucar N20 kit

stangbang · 03-15-2001, 07:44 PM

Unfortunately I had the sorry experience of dealing with these schmucks.As everyone else said they SUCK! I know they have nice two page glossy ads in some of the magazines but I wouldn't even buy a pvc valve from them.Muscle Mustangs and Fast Fords magazine did a feature on a car they built to run in the renagade class (oct 2000). Guess who built the engine? Keith Craft. Why? Even they know that they suck.If they did quality work they would be proud to showcase it in the car!

Mr 5 0 · 03-15-2001, 07:59 PM

Moved to Performance Industry forum.

------------------
Mr. 5.0
Messageboard Administrator

03-13-2001, 06:34 PM	#1
92Rustang Registered Member Join Date: Feb 1999 Location: Smithton, IL, US Posts: 215	Excessive Motorsports? I have read a couple of post on how bad these guys are. I'm thinking about buying a motor from them. Should I????? ------------------ Check my site for mod www.fordmustanggt.com

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Excessive Motorsports Kansas City (long)	mustang_500hp	Small Ponies	1	07-11-1999 12:06 PM
Excessive Motorsports Kansas City (long)	mustang_500hp	Classic Mustangs	0	07-10-1999 03:06 AM

03-13-2001, 07:24 PM	#2
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	No. You shouldn't. Supporting a company that screws people over even if they don't screw you (you most likely will be) isn't right. That's just my opinion. For more info go ahead and click "search" on the area just above the topics in this forum, it's on the right side. Search the "Performance Industry" forum. Search term "Excessive Motorsports." That should be everything that you need to know about those a-holes. They screw people over, big time, again and again. It won't be soon enough when they go out of business. ------------------ 1987 GT 5spd. D&D Performance "Z" spec T-5 Dynomax 2.5" Super Turbo system BBK 2 1/2" H-pipe with cats

03-13-2001, 08:05 PM	#3
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Every couple of months someone posts questions asking about these guys and every couple of months there are 30+ posts talking about how much they suck. Do yourself a favore and stay the hell away from them. They're practically in my backyard and I'd rather wait a couple weeks from a mail order company for my parts. What does that tell ya? ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

03-13-2001, 08:28 PM	#4
92Rustang Registered Member Join Date: Feb 1999 Location: Smithton, IL, US Posts: 215	Thanks for the replies guys. I was search this forum and could not find anything. I searched the Performance Industry and found all the info I needed. I order a new motor form them last week and will be cancelling tomorrow. I don't want to take any chancing. I guess I'm going to go with CCM. ------------------ Check my site for mod www.fordmustanggt.com

03-13-2001, 09:21 PM	#5
buddha Registered Member Join Date: Feb 2000 Location: Washington, MO Posts: 327	Make sure you call them ASAP. Don't be surprised it they try to charge you some sort of restocking fee, or some lame excuse of how they have already started building it. Hopefully this won't be the case.

03-13-2001, 09:58 PM	#6
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	I really doubt they will allow you to cancel without a restock fee. What was the lead time they gave you?

03-13-2001, 10:04 PM	#7
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 735	I bought a "Set" of "Red" fuel rails for a Cartech fuel system and they came Silver and they look a little used. Plus, I didn't get any fittings either. I will never buy from them again.

03-14-2001, 09:51 AM	#8
IMPULSERACING Registered Member Join Date: Dec 1999 Location: chicago,IL,USA Posts: 158	They Suck! They Suck! They Suck! Also, Their shipping Sucks! ------------------ 92' LX Hatch 5 spd Edelbrock Performer Intake, pro-m 75mm MAF, 70mm T.B., 24lb injectors, 190lph, Mac fenderwall cold air induction, mallary ignition and coil, Cobra 1.7 rockers, 373:1 gear, upper and lower control arms, supersubs, 50/50's, front drag springs, no sway bar, battery in hatch, compucar N20 kit

03-15-2001, 07:44 PM	#9
stangbang Registered Member Join Date: Oct 1999 Location: brunswick,ohio Posts: 135	Unfortunately I had the sorry experience of dealing with these schmucks.As everyone else said they SUCK! I know they have nice two page glossy ads in some of the magazines but I wouldn't even buy a pvc valve from them.Muscle Mustangs and Fast Fords magazine did a feature on a car they built to run in the renagade class (oct 2000). Guess who built the engine? Keith Craft. Why? Even they know that they suck.If they did quality work they would be proud to showcase it in the car!

03-15-2001, 07:59 PM	#10
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	Moved to Performance Industry forum. ------------------ Mr. 5.0 Messageboard Administrator