Panhard Bar

Hans 95 Cobra · 11-30-2001, 08:44 PM

Hello,

I did a search on Panhard Bars, as I need one for my 95 Cobra, and found that the Saleen & BBK got the thumbs down, and the MM got the thumbs up.

I was wondering if anybody has installed one on an SN95 and did it clear the exhaust system. If so, what exhaust system did it have? I know the MM ads state that the bar was designed to clear the stock tailpipe routing. I know that it won't clear the Flowmaster setup.

I have the Borla XR-1 and do not want to cut or modify this very pricey exhaust system!

Also, has anyone tried the HPM panhard bar? They claim that it will clear most exhaust systems, and there is no drilling involved! Sounds tempting!

Any input is appreciated.

Thanks!

drudis · 12-05-2001, 10:37 AM

If you are ever going to run any real race rubber on the car, then get a real race panhard...
What I mean is the Saleen/Steeda/BBK... all make one that is "ok" for the street. I have first-hand seen what happens when they break. Get a Griggs or MM or CCM heavy duty one!

11-30-2001, 08:44 PM	#1
Hans 95 Cobra Registered Member Join Date: Nov 2001 Location: Blue Springs, MO Posts: 1	Panhard Bar Hello, I did a search on Panhard Bars, as I need one for my 95 Cobra, and found that the Saleen & BBK got the thumbs down, and the MM got the thumbs up. I was wondering if anybody has installed one on an SN95 and did it clear the exhaust system. If so, what exhaust system did it have? I know the MM ads state that the bar was designed to clear the stock tailpipe routing. I know that it won't clear the Flowmaster setup. I have the Borla XR-1 and do not want to cut or modify this very pricey exhaust system! Also, has anyone tried the HPM panhard bar? They claim that it will clear most exhaust systems, and there is no drilling involved! Sounds tempting! Any input is appreciated. Thanks!

12-05-2001, 10:37 AM	#2
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	If you are ever going to run any real race rubber on the car, then get a real race panhard... What I mean is the Saleen/Steeda/BBK... all make one that is "ok" for the street. I have first-hand seen what happens when they break. Get a Griggs or MM or CCM heavy duty one! __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Panhard bar installed	Illini	Modular Madness	0	05-03-2002 01:39 PM
Panhard Bar	Patrick Boetticher	Windsor Power	1	04-14-2001 08:59 PM
Saleen Panhard = POS	turbolx	Corner Carvers Delight	4	09-06-2000 09:42 AM
Which panhard bar to use?	drudis	Corner Carvers Delight	4	08-01-2000 11:14 AM
Torque Arm - Panhard Bar set-up	autoX	Corner Carvers Delight	4	02-25-2000 02:48 PM