what 1/4 times should i expect

Chevysucks · 01-13-2002, 11:57 AM

i am hoping for at least a 12.8 with good traction. what do u guys think?

fiveohpatrol · 01-13-2002, 01:57 PM

I seriously doubt you'll see 12's with that combo, even if you have a full suspension, slicks, and pull a 1.5 60ft time.

I'd say if you can drive well and hook up, then you'll probably see high 13's , sorry to dissapoint.

lx mike · 01-13-2002, 06:36 PM

what gear and tire do you have?? that x-cam isn't going to do much with stock heads and intake.

my guesstimate is mid 13's

look at fiveohpatrol's sig.

95mustanggt · 01-14-2002, 02:21 PM

The fact that your heads are ported and polished helps, but I think that stock intake is going to hold you back. I'm not going to hazard a guess at your time though, but I doubt you'll see better than a 13.3, even with slicks.

Nitrous Al · 01-14-2002, 09:53 PM

I'm just guessing, but remove the stock intake and heads. Put on a GT40 intake and X303 heads and you might hit mid 12's.

Chevysucks · 01-14-2002, 10:16 PM

yeah i am going to get new heads intake and cam its just a matter of time cause i am short of money. I am going to go with the holly systemax II kit or the systemax race kit.

01-13-2002, 11:57 AM	#1
Chevysucks Registered Member Join Date: Mar 2000 Location: Stroudsburg, PA, USA Posts: 150	what 1/4 times should i expect i am hoping for at least a 12.8 with good traction. what do u guys think? __________________ 88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears

01-13-2002, 01:57 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	I seriously doubt you'll see 12's with that combo, even if you have a full suspension, slicks, and pull a 1.5 60ft time. I'd say if you can drive well and hook up, then you'll probably see high 13's , sorry to dissapoint. __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

01-13-2002, 06:36 PM	#3
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	what gear and tire do you have?? that x-cam isn't going to do much with stock heads and intake. my guesstimate is mid 13's look at fiveohpatrol's sig. __________________ Rice Haters Club Member #101

01-14-2002, 02:21 PM	#4
95mustanggt Registered Member Join Date: May 2000 Location: Kamloops, BC Posts: 2,875	The fact that your heads are ported and polished helps, but I think that stock intake is going to hold you back. I'm not going to hazard a guess at your time though, but I doubt you'll see better than a 13.3, even with slicks. __________________ 1995 Mustang GT 20016 F150 Lariat Super Crew

01-14-2002, 10:16 PM	#6
Chevysucks Registered Member Join Date: Mar 2000 Location: Stroudsburg, PA, USA Posts: 150	yeah i am going to get new heads intake and cam its just a matter of time cause i am short of money. I am going to go with the holly systemax II kit or the systemax race kit. __________________ 88 Stang 306 ci. GT Mustang heads- ported and polished/milled---Soon to be AFR 185cc 1.7 crane roller rockers/extra hardened pushrods FRPP X-303 Cam Stock Intake-1 inch intake spacer BBK Cold Air Induction Stock Injectors--going to 24 pounders BBK Full Length Headers Mac 2.5 inch Cat-Back 8 Point Cage Sub Frame Connectors World Class T-5 Steeda Shift Cable,Quadrant,Firewall adjuster King Cobra Clutch Pro 5.0 Shifter Alunimum Driveshaft/ Drive shaft loop Kenny Brown suspension 3.55 gears

01-14-2002, 09:53 PM	#5
Nitrous Al Registered Member Join Date: May 2000 Location: Everett, MA Posts: 417	I'm just guessing, but remove the stock intake and heads. Put on a GT40 intake and X303 heads and you might hit mid 12's.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1/4 mile times?	chiaronate	Windsor Power	33	11-01-2003 10:48 AM
Check out these times and tell me how i can get better!	1jimmy__d	Stang Stories	6	06-24-2003 01:07 PM
Track Times With the new Tires!!!!!	Stang Runner	Stang Stories	6	10-20-2002 08:31 PM
New Track times On the good old SD and STOCK Short block	Stang Runner	Stang Stories	1	10-10-2002 06:25 PM
4cyl times and #'s??	HiFlow5 0	Blue Oval Lounge	11	03-25-2002 10:23 AM