

© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Jan 2001
Location: Kintnersville, PA USA
Posts: 38
|
![]() I am finishing up my ne keith craft 306 with trick flow track heat heads, trick flow stage 1 cam w/ 1.7 roller rockers, tfs street intake, bbk long tubes, etc. I am going to be using 24# injectors but am not sure what fuel pump i should use. I have a 255 lph sitting around. Is this fuel pump too big for my combo? If so what size should i go with a 190 lph? Thanks for the help in advance!
__________________
91 LX: Green/white stripes, TFS heads, intake, cam, and 1.7 rockers. BBK longtubes, off-road h-pipe w/ flowmasters. |
![]() |
![]() |
![]() |
#2 |
Registered Member
Join Date: May 1999
Posts: 5,246
|
![]() The 255lph pump is serious overkill, but if you already have it, I suppose you can use it. It will run a little hotter than normal, but it won't cause any catastrophic failure of any components.
It will allow you to run N20 or a blower down the line. |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Jan 2002
Location: Indiana
Posts: 5
|
![]() Do you have an Adjustable FPR? If you do you shouldn't have a problem if you just turn the pressure down. I'm not sure on this just a thought.
__________________
99 Cobra- 4:30 gears,FRPP springs,Steeda tri-ax, NX wet kit. |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | Rate This Thread |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
94 GT fuel pump relay | phantom74 | Windsor Power | 0 | 02-01-2004 07:14 PM |
Fuel pump relay questions | Big Bopper | Windsor Power | 1 | 11-10-2002 10:20 PM |
91 bronco 302 fuel pump question | jerrys84 | Windsor Power | 1 | 10-18-2002 11:50 AM |
fuel pump choice...fuel economy??? | fongo | Windsor Power | 3 | 09-28-2002 10:03 AM |
Fuel Pump Replacement | KobraLX | Windsor Power | 1 | 07-31-2001 12:44 PM |