PCV Valve

Scrapla · 04-26-2002, 09:42 AM

Does anyone have a part # to a replacment PCV valve Id like to change mine while I change my oil.

Mr 5 0 · 04-26-2002, 10:14 AM

EV98B or Borg Warner # PCV 395.

Any Ford or Mercury dealer can sell you the complete PCV kit for the 5.0 including screen, grommet and valve for about $10. Recommended.

Forcedpower · 04-26-2002, 11:41 AM

I didn't know that. The only ones I've seen are the crap advance ones.

Kamaro Killer · 04-26-2002, 01:59 PM

I may get sh*t for this one, but where is the PCV valve located? I've asked people who work in parts stores, and they told me my car didn't have one. I've also looked over the engine a few times, and I can't seem to find it. Thanks!

Forcedpower · 04-26-2002, 02:36 PM

Your PCV is located in the back of your lower intake. Just reach behind the intake about in the middle. Should be a hose hooked to it running to your upper intake.

04-26-2002, 09:42 AM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	PCV Valve Does anyone have a part # to a replacment PCV valve Id like to change mine while I change my oil.

04-26-2002, 10:14 AM	#2
Mr 5 0 Conservative Individualist Join Date: May 1997 Location: Wherever I need to be Posts: 7,487	PCV info EV98B or Borg Warner # PCV 395. Any Ford or Mercury dealer can sell you the complete PCV kit for the 5.0 including screen, grommet and valve for about $10. Recommended.

04-26-2002, 11:41 AM	#3
Forcedpower Registered Member Join Date: Aug 1999 Location: Charlottesville, Va, USA Posts: 328	I didn't know that. The only ones I've seen are the crap advance ones. __________________ 93 LX R331/AFR 205/Vic 5.0/? psi

04-26-2002, 01:59 PM	#4
Kamaro Killer Mustang Enthusiast Join Date: Mar 2002 Posts: 528	pcv valve I may get sh*t for this one, but where is the PCV valve located? I've asked people who work in parts stores, and they told me my car didn't have one. I've also looked over the engine a few times, and I can't seem to find it. Thanks! __________________ 1993 GT 5.0-My Stang Rice Hater's Club Member 22

04-26-2002, 02:36 PM	#5
Forcedpower Registered Member Join Date: Aug 1999 Location: Charlottesville, Va, USA Posts: 328	Your PCV is located in the back of your lower intake. Just reach behind the intake about in the middle. Should be a hose hooked to it running to your upper intake. __________________ 93 LX R331/AFR 205/Vic 5.0/? psi

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Air by pass valve question.	Jaegermeister2k	Power Adders	21	05-06-2005 09:40 PM
Valve tap!!	SmokinStangGT	Windsor Power	1	07-31-2003 03:42 AM
valve problem	pearlgt40 306	Windsor Power	3	07-05-2003 01:21 AM
Proportioning Valve	MidniteWrider	Classic Mustangs	1	07-11-2001 09:14 AM
PCV Valve what the ?@#$@#$@$	Chevyguy	Windsor Power	3	04-11-2001 08:01 PM