cam install

james87gt · 05-15-2002, 03:01 PM

I will be putting a B303 cam into my car next week i want to get all the gaskets and stuff for it now, my question is what size intake gasket do i need i will be putting a gt40 on to edelbrock 6037 and what other gaskets or things do i need to do the swap thanks

cyberstang5.0 · 05-16-2002, 07:24 AM

I have matching intake and heads on my car so I don't how much help I'll be

I would get the gaskets to match the intake. The heads should be a very close match anyways. I just used the intake gaskets from Ford.

drudis · 05-16-2002, 10:03 AM

Here is a list of stuff I put on for my heads/cam/intake install:
http://www.dariusrudis.com/mustang/n...gine_parts.pdf

Here are some photos of the install:
http://www.dariusrudis.com/mustang/new_engine

chris91LX · 05-17-2002, 01:14 PM

I used a Fel Pro 1250 lower intake gasket on my setup with Edelbrock 6032s and Ported Cobra Intake. Remember your gonna need a gasket fot the timing chain cover, water pump, upper intake and some other stuff I can't think of right now. Best bet is to get a R.A.C.E. kit, you'll use it all eventually.

05-15-2002, 03:01 PM	#1
james87gt Registered Member Join Date: Jan 2002 Posts: 62	cam install I will be putting a B303 cam into my car next week i want to get all the gaskets and stuff for it now, my question is what size intake gasket do i need i will be putting a gt40 on to edelbrock 6037 and what other gaskets or things do i need to do the swap thanks

05-16-2002, 10:03 AM	#3
drudis Moderator Join Date: Dec 1999 Location: Livonia, MI, USA Posts: 1,194	Here is a list of stuff I put on for my heads/cam/intake install: http://www.dariusrudis.com/mustang/n...gine_parts.pdf Here are some photos of the install: http://www.dariusrudis.com/mustang/new_engine __________________ Darius Rudis, Moderator Corner Carvers Delight 1989 Mustang LX - Open Track Car http://www.dariusrudis.com

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Gears, Install, and Questions	B2r3y	Windsor Power	6	02-21-2003 05:00 PM
Ring and Pinion Install	Titan	Modular Madness	21	08-15-2002 10:06 PM
A Question for 94-95 owners concerning 1.7RR INSTALL	SlowStang2	Windsor Power	6	09-22-2001 06:39 PM
How to install Carbon fiber parking brake handle	ddb	Appearance & Detailing	0	06-01-2001 11:57 PM

05-16-2002, 07:24 AM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	I have matching intake and heads on my car so I don't how much help I'll be I would get the gaskets to match the intake. The heads should be a very close match anyways. I just used the intake gaskets from Ford.

05-17-2002, 01:14 PM	#4
chris91LX Registered Member Join Date: Oct 1998 Location: Suburban Chicago, Hanover Park Posts: 695	I used a Fel Pro 1250 lower intake gasket on my setup with Edelbrock 6032s and Ported Cobra Intake. Remember your gonna need a gasket fot the timing chain cover, water pump, upper intake and some other stuff I can't think of right now. Best bet is to get a R.A.C.E. kit, you'll use it all eventually.