Maybe some of you can help me?!

mustang_pony_83 · 05-16-2002, 10:51 PM

I've been looking into getting a pinion snubber for my 83 stang, and I see on all the sites that have it, that it's made for the 85-93 stangs. I have a 1990 8.8 in rear in mine, and I know from reading all of your posts, that there are a lot of very knowledgeable mustang people in here, and I hoped you could help me. Does anyone have any info on this. I would be very grateful for any information. Thanks!

polara7777 · 05-16-2002, 11:42 PM

I'm curious about this too.

By the way when do i get a ride in the stang? I'll give ya a ride in mine

may not go very far...

mustang_pony_83 · 05-16-2002, 11:55 PM

If there's ever a day when both of us are not working, we need to get together and do a little riding. I'm anxious to ride in the wheel popping stang of yours.

polara7777 · 05-17-2002, 12:19 AM

If my bud will get off his a** and help me get it back to C-town I'll have the c-4 in it this week. Dunno how it will react but I'll find out.

tireburner163 · 05-17-2002, 12:29 PM

hehe looks like we've got a Mississippi convention in here

mustang_pony_83 where are you from? I'm from Merdian.

mustang_pony_83 · 05-18-2002, 08:29 PM

Yeah, we've got a little bit of a Mississippi thing going here. Polara7777 and I work together. I work in Starkville , but I'm from Mathiston, which is only 20 something miles from there. Most people have never heard of Mathiston, so normally I just say I'm from Starkville. Always good to hear from some good ole "Missippi" boys though!

polara7777 · 05-18-2002, 09:43 PM

I'm a good old Mississippi boy now?!? Damn I really need to be shipped back up north! heh

05-16-2002, 10:51 PM	#1
mustang_pony_83 Registered Member Join Date: May 2002 Location: Mississippi Posts: 7	Maybe some of you can help me?! I've been looking into getting a pinion snubber for my 83 stang, and I see on all the sites that have it, that it's made for the 85-93 stangs. I have a 1990 8.8 in rear in mine, and I know from reading all of your posts, that there are a lot of very knowledgeable mustang people in here, and I hoped you could help me. Does anyone have any info on this. I would be very grateful for any information. Thanks! __________________ 8 Seconds...No Sweat 1983 Mustang GT 5.0- K&N Air Filter- Richmond 3.73 gears- B&M Ripper Shifter- T5 World Class Racing Tranny- Edelbrock High Rise Intake- Ford Racing Clutch- 1.6 in Roller Rockers- Heddman Shorty Headers- Holley 670 Street Avenger Carb- Edelbrock heads- 2 Chamber Flowmaster Exhaust- 1/8 ET 8.440 @ 87 MPH

05-16-2002, 11:42 PM	#2
polara7777 Registered Member Join Date: Apr 2002 Location: Columbus, MS Posts: 324	I'm curious about this too. By the way when do i get a ride in the stang? I'll give ya a ride in mine may not go very far... __________________ -Ian Christopher -84 VW Vanagon (Stock so far but it barks 3rd ) -67 Dodge Polara (383 punched 30, Heavy head work, Mopar Performance single plane intake, Holley 750, electric fuel pump, Holley regulator, .484 duration cam, FRIED bottom end!) DOH!!! Fried the #1 rod bearing. Stroker kit coming! -01 Kawasaki Ninja 250 (Clear lenses, shaved fender, rear signals in the rear housing, baffles removed, Deals Gap dragon on the tail.)

05-16-2002, 11:55 PM	#3
mustang_pony_83 Registered Member Join Date: May 2002 Location: Mississippi Posts: 7	If there's ever a day when both of us are not working, we need to get together and do a little riding. I'm anxious to ride in the wheel popping stang of yours. __________________ 8 Seconds...No Sweat 1983 Mustang GT 5.0- K&N Air Filter- Richmond 3.73 gears- B&M Ripper Shifter- T5 World Class Racing Tranny- Edelbrock High Rise Intake- Ford Racing Clutch- 1.6 in Roller Rockers- Heddman Shorty Headers- Holley 670 Street Avenger Carb- Edelbrock heads- 2 Chamber Flowmaster Exhaust- 1/8 ET 8.440 @ 87 MPH

05-17-2002, 12:19 AM	#4
polara7777 Registered Member Join Date: Apr 2002 Location: Columbus, MS Posts: 324	If my bud will get off his a** and help me get it back to C-town I'll have the c-4 in it this week. Dunno how it will react but I'll find out. __________________ -Ian Christopher -84 VW Vanagon (Stock so far but it barks 3rd ) -67 Dodge Polara (383 punched 30, Heavy head work, Mopar Performance single plane intake, Holley 750, electric fuel pump, Holley regulator, .484 duration cam, FRIED bottom end!) DOH!!! Fried the #1 rod bearing. Stroker kit coming! -01 Kawasaki Ninja 250 (Clear lenses, shaved fender, rear signals in the rear housing, baffles removed, Deals Gap dragon on the tail.)

05-17-2002, 12:29 PM	#5
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	hehe looks like we've got a Mississippi convention in here mustang_pony_83 where are you from? I'm from Merdian. __________________ 1987 Buick T-type 1998 HD Electra Elide

05-18-2002, 08:29 PM	#6
mustang_pony_83 Registered Member Join Date: May 2002 Location: Mississippi Posts: 7	Yeah, we've got a little bit of a Mississippi thing going here. Polara7777 and I work together. I work in Starkville , but I'm from Mathiston, which is only 20 something miles from there. Most people have never heard of Mathiston, so normally I just say I'm from Starkville. Always good to hear from some good ole "Missippi" boys though! __________________ 8 Seconds...No Sweat 1983 Mustang GT 5.0- K&N Air Filter- Richmond 3.73 gears- B&M Ripper Shifter- T5 World Class Racing Tranny- Edelbrock High Rise Intake- Ford Racing Clutch- 1.6 in Roller Rockers- Heddman Shorty Headers- Holley 670 Street Avenger Carb- Edelbrock heads- 2 Chamber Flowmaster Exhaust- 1/8 ET 8.440 @ 87 MPH

05-18-2002, 09:43 PM	#7
polara7777 Registered Member Join Date: Apr 2002 Location: Columbus, MS Posts: 324	I'm a good old Mississippi boy now?!? Damn I really need to be shipped back up north! heh __________________ -Ian Christopher -84 VW Vanagon (Stock so far but it barks 3rd ) -67 Dodge Polara (383 punched 30, Heavy head work, Mopar Performance single plane intake, Holley 750, electric fuel pump, Holley regulator, .484 duration cam, FRIED bottom end!) DOH!!! Fried the #1 rod bearing. Stroker kit coming! -01 Kawasaki Ninja 250 (Clear lenses, shaved fender, rear signals in the rear housing, baffles removed, Deals Gap dragon on the tail.)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread: