MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 08-01-2002, 08:37 PM   #1
LethalInjection
Registered Member
 
LethalInjection's Avatar
 
Join Date: Feb 2002
Location: Arkansas
Posts: 13
Angry Please help, got pulled on by a jerk

Ok, I'm mad. I was in town the other night and saw this guy in a 99 GT with some bolt-ons. This thing is an auto car with a mean *** shift kit, a chip, gears, and stuff like that. Somehow he gets away with running this thing in a pure stock class that allows nothing more than maybe a chip and exhaust. But he did wreck it a little while ago into a pole or something and did like 10k worth of damage, he got it back and now it resembles a ricer He ended up beside me at a red light in town. I wan't too crazy about racing there anyway, but it turned green and we went. Everything was just fine at first. I didn't even think he was going to try to race, but when we got to about 20 he jumped the nose a couple of times, and about the time he nalied it i let her eat. I started to spin and he pulled on me about half a car, but when i went to second and finally manage to hook after feathering the gas a little i still couldn't catch the da$n thing I normally would leave this alone and say he has a ****** fast 99, but when i got up beside him i noticed his little girl in the car. She probably is about five years old, and i don't seem to think it's quite right going like 90 through a 35 zone where something tragic could happen with your little girl with you, she didn't even have her seat belt on. So here we go i know of this guy, and he is a real jacka$$ about racing. He's a real di*k if he wins. In my opinion if you win you win its all in fun especially in mustang against mustang, but geez don't go out of your way to cuss the other guy and flip him off and such if you win, unless he provokes you first. Can you guys think of any more things other than the obvious head, cam, supercharger, or nitrous that i can do to bust this guys *** (as long as he's alone anyway) i mean i don't want to pull him a little i want to destroy that thing, because someone needs to teach him a lesson. If your suggestions work i will try to get a full play by play of this dudes lesson along with pics on here for you guys. Please help you guys are awesome
__________________
1995 Blue GT - Ported GT40P's, Mildly Ported Typhoon Intake, 70mm TB, AFM N4 Cam, U/D Pulleys, 190lph pump, BBK equal lengths, O/R H-pipe, 40 series Flows, AODE to T5 swap, Pro 5.0 shifter, 3.55's, Lakewood 70/30 Drag Struts, Weld Prostars w/skinnies, Cobra front bumper, 96-98 cobra hood...
LethalInjection is offline   Reply With Quote
Old 08-01-2002, 09:35 PM   #2
Bad89stang
Registered Member
 
Bad89stang's Avatar
 
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
Default

Hmmmm.... well, look at what you have now. I think your throttle body is too big for your stock intake, 4.10 gears are pretty steep to use without spinning on the street, I would put some type of exhaust pipe after the muffler, but that is just my opinion. Maybe he just outdrove you? If he punched it and hooked while you are feathering the clutch... you would have to have a significant horsepower advantage to make up the difference quickly.
__________________
You're gonna need your seatbelt
Bad89stang is offline   Reply With Quote
Old 08-02-2002, 02:57 AM   #3
LethalInjection
Registered Member
 
LethalInjection's Avatar
 
Join Date: Feb 2002
Location: Arkansas
Posts: 13
Default

that is possible since i was not really expecting the race. he sorta got a jump and surprised me at the same time. and the throttle body was on the car when i bought it. I just didn't really want to change it. figured it may come in handy later. the 4.10's are nice if you can hook halfway decent, but as slick as the pavement in town is they kinda suck. i didn't put them in for red light racing. my tires are worn also i just wanted to have any suggestions for any more go fast parts. If i race him again i will either be at the drag strip or on a back road where it will hook up better.
__________________
1995 Blue GT - Ported GT40P's, Mildly Ported Typhoon Intake, 70mm TB, AFM N4 Cam, U/D Pulleys, 190lph pump, BBK equal lengths, O/R H-pipe, 40 series Flows, AODE to T5 swap, Pro 5.0 shifter, 3.55's, Lakewood 70/30 Drag Struts, Weld Prostars w/skinnies, Cobra front bumper, 96-98 cobra hood...
LethalInjection is offline   Reply With Quote
Old 08-02-2002, 07:21 AM   #4
SlowGT
Registered Member
 
Join Date: Jun 1999
Location: Columbia Co, PA
Posts: 303
Default

Dude, update your sig already. "I've got the mods in my sig. And my times in the 1/8..." So I offer everything I can, and today I lookup your car in the user's rides and find out that you've already got most everything I mentioned or have it in your future plans. You're showing 269RWHP/297ft torque and a 99GT claims 260 and 280. The numbers are close enough that the 2 cars should be pretty competitive. Especially if you're not getting the hook. Another way to improve your quickness would be to dump the stereo out of the trunk. I finally had to ditch mine. I don't think anybody ever realizes how much all that stuff ways. All my junk weighed 82#. I had no idea. Haven't run it since I took it out. I only took it out for the cage install. Course I'll still be +40-50# once that's done.


Weld in subframe connectors and aftermarket control arms would be a good next mod for ya. When you jump on it and the left front corner raises and the as#end dances sideways, that takes power that could be going to the tires. I've got both. Put them on at different times and each made a significant difference in how the car takes off from the line and from the slow roll.

Happy motoring
__________________
Old Slow GT

New Slow GT--> under construction



Latest Addition: 95 Cobra R, #73, bone stock, ~6100 miles.
SlowGT is offline   Reply With Quote
Old 08-02-2002, 12:36 PM   #5
Hethj7
Mizzou Tigers
 
Hethj7's Avatar
 
Join Date: Apr 1999
Location: weston, MO United States
Posts: 1,455
Default

fyi: 260 hp and 280 ft-lbs for a 99 GT is given at the flywheel. His numbers are at the wheels.
__________________
2006 Mustang GT

1990 LX
GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved)

1998 Contour SVT

Rice Haters Club Member #244
Hethj7 is offline   Reply With Quote
Old 08-02-2002, 12:52 PM   #6
SlowGT
Registered Member
 
Join Date: Jun 1999
Location: Columbia Co, PA
Posts: 303
Default

SORRY!!

With the 03 Cobra putting down it's 390 at the wheels, I just thought maybe the 99GT did it too.

Then it must be a driving issue.
__________________
Old Slow GT

New Slow GT--> under construction



Latest Addition: 95 Cobra R, #73, bone stock, ~6100 miles.
SlowGT is offline   Reply With Quote
Old 08-02-2002, 01:49 PM   #7
Hethj7
Mizzou Tigers
 
Hethj7's Avatar
 
Join Date: Apr 1999
Location: weston, MO United States
Posts: 1,455
Default

Quote:
Originally posted by SlowGT
SORRY!!

With the 03 Cobra putting down it's 390 at the wheels, I just thought maybe the 99GT did it too.

Then it must be a driving issue.
No need to yell man, I was just pointing it out . Pretty much any numbers that are given by the factory are power numbers at the flywheel. I also think that 390 on the Cobra is a flywheel number, although apparently some of these beasts are putting down some great numbers on the chassis dyno's.
__________________
2006 Mustang GT

1990 LX
GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved)

1998 Contour SVT

Rice Haters Club Member #244
Hethj7 is offline   Reply With Quote
Old 08-02-2002, 02:32 PM   #8
gau83stang
Registered Member
 
Join Date: Jul 2002
Location: Fayetteville, NC
Posts: 7
Default

First, if you are angry that he raced you with his daughter in the car, why did you run him in the first place? Second do you drive mostly on the street or the strip? For street I'd run 3.73 gears. I don't know how much you're budget is, but I'd look into a good set of heads, an intake, and cam combo. I'd look at the Holley SystemMax II, or the Edelbrock RPM setup. I'd suggest using the whole system, ie the upper, lower intake, the heads, and the reccomended cam. If you want more compression ie more power, have the heads milled. The reason I say use one of these systems is good power production comes from the right combination of parts, not just picking the "best"parts. I hope that helps you out. Good luck.
gau83stang is offline   Reply With Quote
Old 08-02-2002, 04:54 PM   #9
SlowGT
Registered Member
 
Join Date: Jun 1999
Location: Columbia Co, PA
Posts: 303
Default

No Harm, No Foul.

One of the recent stang mags pulled right around 390 @ the wheels and I had heard that in recent years they had gone to estimating the HP @ the wheels. Apparently I was misled or just misunderstood. Peace.
__________________
Old Slow GT

New Slow GT--> under construction



Latest Addition: 95 Cobra R, #73, bone stock, ~6100 miles.
SlowGT is offline   Reply With Quote
Old 08-02-2002, 05:21 PM   #10
LethalInjection
Registered Member
 
LethalInjection's Avatar
 
Join Date: Feb 2002
Location: Arkansas
Posts: 13
Default

gau83stang, i am angry for racing him with his daughter in the car, but i did not realize she was even in there until i got to another red light like 5 mins later. i know that he did not pick her up from anywhere because he never left my sight but didn't get back beside him for a while because of the traffic. if i had know she was in there there is no way in heck that i would have even responded to his wanting to race i would have just let him floor it and do whatever from there. i was mad because where he was was sorta like the town strip where everybody goes to find races and he had been cruising it for a while before i had even got there according to some ppl i had talked to. as he usually does when he goes up there. i go up there because that is where my friend tend to gather and usually just park and talk to them. this guy is way older than everyone else up there and besides that has made most everybody mad running his mouth anyway, so the only reason he goes up there is to find races which he does everytime he goes up there. i am perfectly fine with him going up there to race but am not fine about him racing with his daughter with him. the least he could have done was tell me to pull over and we would have went to some backroad let his daughter out and raced. that would have been much better than risking her life, or her getting hurt. Oh and i do drive mostly on the street so i guess 3.73's would be better, its just that i got the 4.10 from a friend for cheap. And i have large rims and tires and my gear ratio is calculated 3.94. don't know if that makes that much of a difference, but just thought i would share, they're probably still too low. thanks man just thought i would clarify that i had no intention of racing much lesss racing with his little girl in there.



Les
__________________
1995 Blue GT - Ported GT40P's, Mildly Ported Typhoon Intake, 70mm TB, AFM N4 Cam, U/D Pulleys, 190lph pump, BBK equal lengths, O/R H-pipe, 40 series Flows, AODE to T5 swap, Pro 5.0 shifter, 3.55's, Lakewood 70/30 Drag Struts, Weld Prostars w/skinnies, Cobra front bumper, 96-98 cobra hood...
LethalInjection is offline   Reply With Quote
Old 08-02-2002, 05:21 PM   #11
Dark_5.0
Registered Member
 
Dark_5.0's Avatar
 
Join Date: Apr 2001
Location: Staging lane
Posts: 4,337
Default

I would think you would smoke him as it sits now.
__________________
92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim.
00' Lightning-Stock
88'CRX-13 second ego killer
Dark_5.0 is offline   Reply With Quote
Old 08-02-2002, 05:27 PM   #12
RoadWarrior
Registered Member
 
RoadWarrior's Avatar
 
Join Date: Apr 2000
Location: Edmonton,Alberta,Canada
Posts: 317
Default

Personally i would say work on getting some traction. If the car wont hook now whats the point of putting more power to those spinning wheels. Get some nice meaty tires, some controll arms, and subframe connectors. Otherwise there is no point adding more hp. Otherwise you'll just be playing catch-up and thats a hard race to win.
__________________
Fast Company
RoadWarrior is offline   Reply With Quote
Old 08-02-2002, 05:43 PM   #13
LethalInjection
Registered Member
 
LethalInjection's Avatar
 
Join Date: Feb 2002
Location: Arkansas
Posts: 13
Default

is there any specific tire recommendations that you guys care to offer. i've got 17's now, but am thinking about puttin a set of torque thrust 2's on it. 16's up front to clear rotors and 15's in the back if they make 'em. i was thinkin about a set of nitto 555R's for the 17's. are these any good. i don't know what the crap would be good tires for the 15's.


Les
__________________
1995 Blue GT - Ported GT40P's, Mildly Ported Typhoon Intake, 70mm TB, AFM N4 Cam, U/D Pulleys, 190lph pump, BBK equal lengths, O/R H-pipe, 40 series Flows, AODE to T5 swap, Pro 5.0 shifter, 3.55's, Lakewood 70/30 Drag Struts, Weld Prostars w/skinnies, Cobra front bumper, 96-98 cobra hood...
LethalInjection is offline   Reply With Quote
Old 08-03-2002, 12:39 PM   #14
gau83stang
Registered Member
 
Join Date: Jul 2002
Location: Fayetteville, NC
Posts: 7
Default

I think that an upgrade in traction would also benefit you, probably more than the mods I suggested. I don't know much about tires either, but I've heard good things about the Nittos. Maybe you could get a set of M/T ET streets. Like I said I don't know much about tires, I'm more of an engine, tranny man. I can give you all kinds of info on that stuff. As a matter of fact I'm working on my new project. It's an 83 V-6 Stang (currently, anyways). I'm looking to do a 347(302 block) stroker or a 427(351W) stroker for it. Anyways, have fun. Oh yeah maybe a clutch upgrade is in order on your car? I don't remember if you said you had a shift kit either? But definetely try tires, then maybe some suspension work.
gau83stang is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
pulled this code 95stang50 Windsor Power 2 05-03-2003 11:31 PM
Pulled over last night :( yelowjaket Blue Oval Lounge 3 04-01-2003 03:51 PM
Pulled intake and swapped fuel rails now getting codes. Rebel79 Windsor Power 3 09-03-2002 12:13 AM
pulled engine....pulled out wallet....a true story! 84LX89GT Windsor Power 6 03-13-2002 03:04 PM
Pulled over for the first time! Gautam Blue Oval Lounge 5 03-02-2001 03:59 AM


All times are GMT -5. The time now is 07:07 AM.


SEARCH