Friend just gave me ADS chip!!

90dpscoupe · 05-14-2001, 11:06 PM

I would have never bought one, but i got my friends old one, i can say i feel a little difference at WOT, but hard to tell with two passengers, im going to the track wednsday, and gonna throw on a steeda water pump pulley, and see if i cant run consistent 13.8-9s and tear into those imports that will be meeting.

i'll keep posted for anyone that was, or is gonna drop the cash for one of these chip's, my higher rpms do feel stronger, and my timing was reset today at 12-13, and no ping with the chip yet

see ya...

Hey for free i cant complain...

------------------
90 lx coupe: Mac cold air fenderwell, accel supercoil,ADS chip (not yet track tested),3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows.
Best time: 13.9116(on 225/60/15 firehawks)
Best mph: 98.17
Best 60': 1.9607

next mods: subframes, mac h-pipe

TheSloAod · 05-14-2001, 11:54 PM

i have one of those things in my car, i couldnt tell any diff., probally because of it being an aod... check into a cobra water pump pulley from ford, they are $20, i dont know what steeda's price is but the cobra pulley is cheap

------------------
My slo aod- 3.73s, pullies, flowmasters, h-pipe, bbk cold air, and 13.42 in the 1/4 @ 103 mph

fastang · 05-16-2001, 06:49 PM

I had one for a while and gave it to 95Mustanggt, who posts here as well. It worked great for me untill I swapped my cam. Do you have cats? The instructions w that chip says not to use them.

------------------
95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

90dpscoupe · 05-16-2001, 10:47 PM

Yea i do have cats? is this not good? well i still have plans for, american thunder catback, and mac h-pipe, so i guess i wont worry bout it. thanx for the info.

------------------
90 lx coupe: Mac cold air fenderwell, accel supercoil,ADS chip (not yet track tested),3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows.
Best time: 13.9116(on 225/60/15 firehawks)
Best mph: 98.17
Best 60': 1.9607

next mods: subframes, mac h-pipe

05-14-2001, 11:06 PM	#1
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	Friend just gave me ADS chip!! I would have never bought one, but i got my friends old one, i can say i feel a little difference at WOT, but hard to tell with two passengers, im going to the track wednsday, and gonna throw on a steeda water pump pulley, and see if i cant run consistent 13.8-9s and tear into those imports that will be meeting. i'll keep posted for anyone that was, or is gonna drop the cash for one of these chip's, my higher rpms do feel stronger, and my timing was reset today at 12-13, and no ping with the chip yet see ya... Hey for free i cant complain... ------------------ 90 lx coupe: Mac cold air fenderwell, accel supercoil,ADS chip (not yet track tested),3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 98.17 Best 60': 1.9607 next mods: subframes, mac h-pipe

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Chip Vs. Programmer	xxxBlakexxx	Modular Madness	18	12-30-2004 06:03 PM
Diablo Chip Test	xxxBlakexxx	Modular Madness	17	03-24-2004 05:37 AM
Which Chip is Best?	xxxBlakexxx	Modular Madness	1	12-28-2003 04:04 PM
Is chip needed when changing to 3.73's?	bark3rd	Modular Madness	11	04-05-2001 11:21 AM
SUPER CHIP DEAL	RubY	Stang Stories	0	01-21-2001 10:32 AM

05-14-2001, 11:54 PM	#2
TheSloAod Registered Member Join Date: Apr 2001 Location: baytown, tx usa Posts: 121	i have one of those things in my car, i couldnt tell any diff., probally because of it being an aod... check into a cobra water pump pulley from ford, they are $20, i dont know what steeda's price is but the cobra pulley is cheap ------------------ My slo aod- 3.73s, pullies, flowmasters, h-pipe, bbk cold air, and 13.42 in the 1/4 @ 103 mph

05-16-2001, 06:49 PM	#3
fastang Registered Member Join Date: Aug 2000 Location: santa ana ca Posts: 1,349	I had one for a while and gave it to 95Mustanggt, who posts here as well. It worked great for me untill I swapped my cam. Do you have cats? The instructions w that chip says not to use them. ------------------ 95GT B303 cam, 1.7 rockers, 65mm TB, 73mm MAF, milled heads, 355's K&N, BBK Longtubes, Flowmaster cat back, pulleys, msd coil, 9mm wires, Tremec 3550, Pro5.0 shifter,10.5 Motorsport clutch, FMS aluminum driveshaft, weld in subframe connectors

05-16-2001, 10:47 PM	#4
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	Yea i do have cats? is this not good? well i still have plans for, american thunder catback, and mac h-pipe, so i guess i wont worry bout it. thanx for the info. ------------------ 90 lx coupe: Mac cold air fenderwell, accel supercoil,ADS chip (not yet track tested),3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows. Best time: 13.9116(on 225/60/15 firehawks) Best mph: 98.17 Best 60': 1.9607 next mods: subframes, mac h-pipe