AFR 165 owners please help asap....

dragstang86 · 01-03-2003, 07:27 PM

Im swapping out my gt-40 irons for afr 165 58cc stud mount rockers sunday. Now im picking up my stud mounted 1.6 roller rockers tomorrow and some hardened pushrods. My question is do I need a different size pushrod?? I hope not but i didnt even think about that until today.

thanks for the help

HotRoddin · 01-04-2003, 06:40 PM

I don't know the answer to that question, but i do know you better not guess. That could cause you alot of grief ! Call AFR or maybe the tech line at summit, or one of the cam tech lines ?

88COBRA · 01-04-2003, 09:32 PM

You may need a dofferent size. I know that from my stock heads to my AFR's I had to change the length.

Do not just assume they fit, measure and make sure

Ian

01-03-2003, 07:27 PM	#1
dragstang86 Registered Member Join Date: Sep 2002 Location: baltimore, md Posts: 220	AFR 165 owners please help asap.... Im swapping out my gt-40 irons for afr 165 58cc stud mount rockers sunday. Now im picking up my stud mounted 1.6 roller rockers tomorrow and some hardened pushrods. My question is do I need a different size pushrod?? I hope not but i didnt even think about that until today. thanks for the help __________________ 90 LX Hatchback 306, AFR 165's 58cc, E303, 1.6 roller rockers, 70mm throttle body, cobra intake, bbk fenderwell, bbk longtubes, x-pipe, flowmasters, pullies, msd 6a, crane ps-92, stock MAF sensor, electric fan, No AC, No air pump, flaming river quick ratio rack C-4, 3500 stall, 373's, aluminum driveshaft SSM Lift bars, , sub frame connectors, strut tower brace 12.57 @105.12mph w/ 1.686 60ft before bbk longtubes (with equal shorties) ----------------------------------------- 86 tube chassis coupe - the trailor queen

01-04-2003, 09:32 PM	#3
88COBRA STANGPOWER.COM Join Date: Jun 1999 Location: Ontario, Canada Posts: 1,045	You may need a dofferent size. I know that from my stock heads to my AFR's I had to change the length. Do not just assume they fit, measure and make sure Ian __________________ My WebSites: VortechPower.com - Brand new site for Vortech users! NOVIPOWER.COM - Devoted to the performance of the NOVI supercharger STANGPOWER.COM - A small community based in Canada for Mustangs *MORE WebSites Coming soon* PLEASE NOTE: I am not an affiliate (nor do I work for) any Mustang parts retailers - I create informational Mustang WebSites

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SVT Mustang owners??	99_SVT_Cobra	Special Production	8	10-04-2001 01:05 PM
Question To Mustang Owners In North Carolina!!!	1BadMoFo5.0	Blue Oval Lounge	2	05-29-2001 01:50 AM
Welcome truck owners!	StangFlyer	Built Ford Tough	8	02-11-2001 01:43 PM
Cobra haters & Late model F-body owners ... attention	mystic96	Blue Oval Lounge	14	01-03-2001 03:44 PM
69 owners, please read	Sean6990	Classic Mustangs	0	08-20-1999 11:47 PM

01-04-2003, 06:40 PM	#2
HotRoddin cranky old man Join Date: Sep 2001 Location: Longview Texas Posts: 683	I don't know the answer to that question, but i do know you better not guess. That could cause you alot of grief ! Call AFR or maybe the tech line at summit, or one of the cam tech lines ?