4.6 to 5.0

zach0 · 03-11-2003, 02:15 PM

How hard would it be to put a 302 into a 94 T-Bird with a 4.6. What would I have to change and would everything bolt up

95mustanggt · 03-11-2003, 06:23 PM

Ouch! I would guess that you'd need a tranny, motor mounts, computer, the complete engine, and maybe some fabrication work. The 302 is smaller than the 4.6, so you should have the room.

03-11-2003, 02:15 PM	#1
zach0 Registered Member Join Date: Apr 2001 Location: Hampton, Virginia Posts: 227	4.6 to 5.0 How hard would it be to put a 302 into a 94 T-Bird with a 4.6. What would I have to change and would everything bolt up __________________ 1980 RX7 with 289 Ford V-8 bored .030 over, Very radical cam, Torker 2 high rise intake, Holley 650 Carb, MSD Nascar 6ALN ignition, MSD coil and distributor, Headers with dual open side exhaust. Over 300 horse. 1966 Mustang still in progress

03-11-2003, 06:23 PM	#2
95mustanggt Registered Member Join Date: May 2000 Location: Kamloops, BC Posts: 2,875	Ouch! I would guess that you'd need a tranny, motor mounts, computer, the complete engine, and maybe some fabrication work. The 302 is smaller than the 4.6, so you should have the room. __________________ 1995 Mustang GT 20016 F150 Lariat Super Crew

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: