Ack, amidst my motor rebuild I screwed up...(ford guru's needed!)

chickendreamer · 03-24-2003, 08:08 PM

Well, i ended up getting the wrong timming chain cover for my 95 mustang GT. The problem is, the timming chain cover i got, I do not know which vehicle it came off of, is there any way to find out? The casting number on the one I have is RF-E8AE-6059-AA. Is there anywhere I can find out what timming chain cover this came off of, and if so can I use this one in my mustang without many modifications?

If not, what casting numbers will I need to have the proper timming chain cover?

Thanks in advance for your help!

PeTr0 · 03-24-2003, 08:13 PM

If it is a ford part and dealership with a parts department and a computer can tell you where it came from.

fiveohpatrol · 03-24-2003, 11:37 PM

why can't you re-use your original timing cover?

chickendreamer · 03-25-2003, 09:02 AM

Quote:

Originally posted by fiveohpatrol
why can't you re-use your original timing cover?

Because I want to keep the origional motor intact. I could always rob the one off my existing motor, then find a replacment for it later but I would rather keep all the origional parts on the motor.

03-24-2003, 08:08 PM	#1
chickendreamer Registered Member Join Date: Jun 2002 Location: Edmonton, Alberta, Canada Posts: 53	Ack, amidst my motor rebuild I screwed up...(ford guru's needed!) Well, i ended up getting the wrong timming chain cover for my 95 mustang GT. The problem is, the timming chain cover i got, I do not know which vehicle it came off of, is there any way to find out? The casting number on the one I have is RF-E8AE-6059-AA. Is there anywhere I can find out what timming chain cover this came off of, and if so can I use this one in my mustang without many modifications? If not, what casting numbers will I need to have the proper timming chain cover? Thanks in advance for your help! __________________ Chicken Dreamer 1995 Mustang GT Last edited by chickendreamer; 03-25-2003 at 09:00 AM..

03-24-2003, 08:13 PM	#2
PeTr0 Registered Member Join Date: Jun 1999 Location: Chicago, IL, USA Posts: 286	If it is a ford part and dealership with a parts department and a computer can tell you where it came from. __________________ Red 1993 Gt- 3.55 gears,flowmasters,BBK Shortie Headers, BBK Hi-Flow H-Pipe, BBK cold air induction w/K&N, Pro 5.0 shifer,UPR Adjustable cable and quad, 130 amp alt., underdrives,65mm T-body,MegaBite Jr. Lowers and Heavy Duty HPM uppers, Koni Yellow struts & Shocks, FMS 'B' Springs, Aluminum Driveshaft, MSD 6AL and blaster tfi coil, sony cd player and changer, kicker component speakers, Kenwood Excelon amp, 2 12" subs in the hatch,Cobra R Rims and Nitto NT555 all around, timing bumped to 13 deg., ADS Superchip, and mobil 1 oil lubing the 302.

03-24-2003, 11:37 PM	#3
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	why can't you re-use your original timing cover? __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Safety Issue 64 - 70 Mustangs	Mach1 Cobra Jet	Classic Mustangs	20	07-11-2005 08:06 PM
blower guru's needed asap!!!	briand	Windsor Power	1	01-03-2003 11:13 PM
Follow up to cam swap question - cam gurus needed	mysweetlx	Windsor Power	3	07-31-2002 06:56 PM
Suspension gurus needed!!!	mysweetlx	Windsor Power	2	07-09-2002 04:12 PM
Turbo gurus needed!	mysweetlx	Windsor Power	5	05-13-2002 06:22 PM