© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
04-11-2003, 10:21 AM | #1 |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
Hot or Not?
What do you all think? Would your Fox wear this?
|
04-11-2003, 10:56 AM | #2 |
Registered Member
Join Date: Apr 2002
Location: Tustin, CA
Posts: 465
|
That picture is too close, I'd like to see it further away and with the wiper arms in place
-as
__________________
'89 GT Convertible: TFS TW Heads, TFS Street Intake, TFS Stage 1 Cam, FMS 1.6 RRs, 24# Injectors, Pro-M 75mm MAF, No Name CAI, 3.73s, O/R H-Pipe, FlowMasters, AOD w/ Trans-Go Shift Kit |
04-11-2003, 12:06 PM | #3 |
Registered Member
Join Date: Feb 2003
Location: NJ
Posts: 81
|
Hey there, they look great, ihave them on my blue stang that you see in the pic, i have gotten so many complments about it.
Ernie
__________________
93 GT 351 to 393 stroker, GT40 upper and lower intake, GT40X Turbo Swirl heads, holley 80mm throttle body, 255 fuel pump, 42 lb injector, JE pistons, Comp cam, comp lifters, comp pushrods, comp springs, crane Roller rockers. Trick flow Crank Shaft, comp Timing chain. MSD 7 series ignition, msd hvc2 coil, MSD timing adjust, MSD Pro billet Dis, Hooker long tube, Off road H pipe 1 chanber race flows, 4.10 gears, Vortech cooler and T-Trim with a 25lb boost AND LOTS MORE. |
04-11-2003, 12:08 PM | #4 |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
Do you have a closer picture showing the cowl?
|
04-11-2003, 12:17 PM | #5 |
Registered Member
Join Date: Apr 2002
Location: Tustin, CA
Posts: 465
|
I found this on teh website.. I was hoping to find a picture showing the car beter...
-as
__________________
'89 GT Convertible: TFS TW Heads, TFS Street Intake, TFS Stage 1 Cam, FMS 1.6 RRs, 24# Injectors, Pro-M 75mm MAF, No Name CAI, 3.73s, O/R H-Pipe, FlowMasters, AOD w/ Trans-Go Shift Kit |
04-11-2003, 12:20 PM | #6 |
T.P.M. President
Join Date: May 2002
Location: Brownsville
Posts: 265
|
Hmmm...seems interesting...
|
04-11-2003, 01:09 PM | #7 |
Registered Member
Join Date: Apr 2002
Location: Downers Grove, IL
Posts: 464
|
I really like those, is there anywhere to buy them besides from the company? I've heard some bad reviews about their customers service. ~Brian
__________________
1989 Black Mustang GT Hatchback, Underdrive Pulles, Electric Fan, Cold Air Intake, Headers, Offroad H-Pipe, Magnaflow catback, Steeda Tri-Ax, Fluidyne Aluminum Radiator, Timing at 14*, 3.73's Coming not so soon: 408w Ricer Hater's Club Member #59 |
04-11-2003, 02:14 PM | #8 |
Registered Member
Join Date: Feb 2003
Location: NJ
Posts: 81
|
Hi there i got mine on ebay for 35 bucks brand new.
__________________
93 GT 351 to 393 stroker, GT40 upper and lower intake, GT40X Turbo Swirl heads, holley 80mm throttle body, 255 fuel pump, 42 lb injector, JE pistons, Comp cam, comp lifters, comp pushrods, comp springs, crane Roller rockers. Trick flow Crank Shaft, comp Timing chain. MSD 7 series ignition, msd hvc2 coil, MSD timing adjust, MSD Pro billet Dis, Hooker long tube, Off road H pipe 1 chanber race flows, 4.10 gears, Vortech cooler and T-Trim with a 25lb boost AND LOTS MORE. |
04-11-2003, 03:11 PM | #9 |
Sizzlin' Sicilian
Join Date: Mar 2003
Location: California
Posts: 502
|
I think it looks pretty cool.
|
04-11-2003, 11:26 PM | #10 |
Registered Member
Join Date: Feb 2003
Location: Blue Springs Mo
Posts: 39
|
Looks too rice burner like to me. Looks like something that the imports would have. No offense but don't like them
__________________
~(Dustang90)~ |
04-12-2003, 07:37 AM | #11 |
Registered Member
Join Date: Apr 2002
Location: Fordland
Posts: 117
|
I agree- no offense, but it looks ricey.
Not quite as bad as the lighted valvestem caps, but ricey none the less... Then again, it's not my car, so- whatever floats your boat...
__________________
'88 Speed Density LX 1998 Explorer motor 1.7 Roller Rockers GT-40 lower ported & polished Cobra upper intake MAC CAI Aluminum Pullies FRPP P-Shortys Cop car cam (to insult) Competition Engineering F/R adjustables Flowmasters New black carpet and... '84 Racin' Tempo seats! Cars' best run in 2002 with stock 150,000 mile 302 with pullies, exhaust and roller rockers only... 13.27 at 101.5 mph |
04-12-2003, 03:47 PM | #12 |
It's never clean enough!
Join Date: Jan 1999
Location: Shaler, PA
Posts: 1,542
|
I like the one's that don't have those 'scoops' on them. I forget what company makes them but they are the exact same thing but without the scoops. Just a plain flat plastic that you paint to match. The scoops just look very out of place IMO
Dan
__________________
~Dan 2001 SVT Lightning 89' GT : Taking up garage space and waiting for a buyer... Rice Hater's Club - Member #11 |
04-13-2003, 03:16 AM | #13 | |
Registered Member
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
|
Quote:
__________________
You're gonna need your seatbelt |
|
04-13-2003, 09:49 AM | #14 |
Registered Member
Join Date: Apr 2002
Location: Downers Grove, IL
Posts: 464
|
Stang_Crazy: That one you are referring to is made by Harwood. Only drawback is you can't have wipers. ~Brian
__________________
1989 Black Mustang GT Hatchback, Underdrive Pulles, Electric Fan, Cold Air Intake, Headers, Offroad H-Pipe, Magnaflow catback, Steeda Tri-Ax, Fluidyne Aluminum Radiator, Timing at 14*, 3.73's Coming not so soon: 408w Ricer Hater's Club Member #59 |
04-13-2003, 11:37 AM | #15 |
Registered Member
Join Date: Nov 2001
Location: Fall River, MA
Posts: 467
|
it does look different and some people will find it refreshing to see something different that you can do with the 'stang, but I don't think it matches the lines of the fox body at all. Almost looks like it would match perfectly with the sn95, but they don't have the cowl piece like that.
The stock cowl on the fox does look pretty weird if you focus on it. Maybe I'd change it if someone made a subtle cowl, maybe completely smooth all the way across with some well-spaced reverse louvers in it and you could paint it body color and that would look perfect.
__________________
'02 Explorer XLT 4.0L --Nice Vehicle '97 Saturn SL1--Soon to be ditched for a Ford! |
04-13-2003, 02:38 PM | #16 | |
Sizzlin' Sicilian
Join Date: Mar 2003
Location: California
Posts: 502
|
Quote:
|
|
04-13-2003, 05:52 PM | #17 | |
It's never clean enough!
Join Date: Jan 1999
Location: Shaler, PA
Posts: 1,542
|
Quote:
LOL J/K with ya I might look into the Harwood piece for myself. I haven't used my wipers in 2 years.
__________________
~Dan 2001 SVT Lightning 89' GT : Taking up garage space and waiting for a buyer... Rice Hater's Club - Member #11 |
|
04-13-2003, 10:05 PM | #18 | |
Sizzlin' Sicilian
Join Date: Mar 2003
Location: California
Posts: 502
|
Quote:
|
|
04-14-2003, 07:00 PM | #19 |
Registered Member
Join Date: Nov 1998
Location: southern Illinois
Posts: 312
|
didnt roush make a kinda ram air that mounted like that and used the low pressure off the windshield to "force" air into the intake?
__________________
88 gt convertable =-= cobra intake, accufab 65 mm tb headers alum underdrives steeda alum.lca's, springs, c/c plates kyb struts 230 hp to da wheels http://www.cybersteed.freeservers.com |
04-14-2003, 11:43 PM | #20 |
Registered Member
Join Date: Apr 2002
Location: Florida
Posts: 532
|
I like my cowl lookin like a grill :-)
__________________
90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73 |
Thread Tools | |
Display Modes | Rate This Thread |
|
|