Broke my brother's GT.....DOH!!!!

tireburner163 · 04-13-2003, 08:12 AM

Well my stang is having some problems with the motor so I was gonna sway the computer out of my older brother's car since it's not a dailey driver. Well it was facing nose down the driveway and I needed to turn it around so that it was tail down so that I would have better light to work in (it was dark). So instead of backing all the way into the street I just turned hard left then pulled forward into the yard. But has I was backing back onto the driveway, WHAM!!!!!!. I snagged the collector of one of the longtubes (it's lowered too). It hit HARD, stoped the car. So anyway, it's got race car exhaust now, and it looks like it bent the header up into the shift linkage (AOD) and bent it up against the stearing shaft, so it hard to steer. DOH!!!!!!!

Any clue about how to fix this short of buying new headers?

L8ter,
Josh, aka the stang breaker

fiveohpatrol · 04-13-2003, 04:47 PM

Try a long pry bar on it, with a piece of pipe on the end to give you even more leverage. But chances are you may cause a crack, or a broken weld somewhere in the header, so be prepared to do some welding.

Why dont you just slap those BBK shorties on it

Crazy Horse GT · 04-13-2003, 09:32 PM

geez josh , your a klutz, lol, your like a frenchman winning a war, good luck. lol.

MidNiteBlu 5.0 · 04-14-2003, 03:53 AM

AHAHAHAHAHAHAHA good job

1969Mach1 · 04-16-2003, 03:02 PM

If you were my brother, I'd be a only child.

My brother scratched my Mach 1 one day with his bike, I made it very clear that I was going to kill him if he wasn't careful the next time.

I think my exact words were "I'll kill you if you ever scratch my car" lol

Ohh.. well accidents happen right... lol Even though a few extra seconds could of prevented it.

Best of luck fixing it.

-Sam.

04-13-2003, 08:12 AM	#1
tireburner163 It's a lot like a race car Join Date: Aug 2000 Location: Meridian, MS Posts: 4,130	Broke my brother's GT.....DOH!!!! Well my stang is having some problems with the motor so I was gonna sway the computer out of my older brother's car since it's not a dailey driver. Well it was facing nose down the driveway and I needed to turn it around so that it was tail down so that I would have better light to work in (it was dark). So instead of backing all the way into the street I just turned hard left then pulled forward into the yard. But has I was backing back onto the driveway, WHAM!!!!!!. I snagged the collector of one of the longtubes (it's lowered too). It hit HARD, stoped the car. So anyway, it's got race car exhaust now, and it looks like it bent the header up into the shift linkage (AOD) and bent it up against the stearing shaft, so it hard to steer. DOH!!!!!!! Any clue about how to fix this short of buying new headers? L8ter, Josh, aka the stang breaker __________________ 1987 Buick T-type 1998 HD Electra Elide

04-13-2003, 04:47 PM	#2
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Try a long pry bar on it, with a piece of pipe on the end to give you even more leverage. But chances are you may cause a crack, or a broken weld somewhere in the header, so be prepared to do some welding. Why dont you just slap those BBK shorties on it __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

04-13-2003, 09:32 PM	#3
Crazy Horse GT Registered Member Join Date: Aug 2001 Location: Sale Creek, TN. C. S. A. Posts: 4,652	geez josh , your a klutz, lol, your like a frenchman winning a war, good luck. lol. __________________ 95 gt vert, lot's of stuff, it aint slow. 04 sonic blue v - six my beater 89 rs camaro iroc turbo hood, other stuff, my wifes ride 84 lx stang cammed up 289 hi po, etc 65 falcon, maybe by the year 2020. black 00gt, gone but never forgotten. R H C- member # 1 o.b.c. da prez- member # 1 if your under 40 dont ask. goodbye for now odie,r.i.p. 11-27-03

04-14-2003, 03:53 AM	#4
MidNiteBlu 5.0 I got something to say Join Date: Sep 2001 Location: San Diego, CA Posts: 1,557	AHAHAHAHAHAHAHA good job __________________ 91 LX Hatch 5.0 - made for the twisties 89 LX Hatchback 5.0 5spd. stolen/stripped 4/7/05 http://www.mustangworks.com/cgi-bin/...splay.cgi?3494 1987 Toyota Pickup Ricer Haters Club Member #33 Want a custom gauge cluster for your Vintage Mustang? www.jmeenterprises.com

04-16-2003, 03:02 PM	#5
1969Mach1 HEY I CAN SET A NAME NOW! Join Date: Oct 2001 Location: Ontario, Canada Posts: 2,556	If you were my brother, I'd be a only child. My brother scratched my Mach 1 one day with his bike, I made it very clear that I was going to kill him if he wasn't careful the next time. I think my exact words were "I'll kill you if you ever scratch my car" lol Ohh.. well accidents happen right... lol Even though a few extra seconds could of prevented it. Best of luck fixing it. -Sam. __________________ 1969 Mustang Mach 1Sold 351-4V Windsor, 4 Speed MACH 1 - Moving At The Speed Of Sound. 1979 Mustang Indianapolis 500 Pace Car For Sale - Email me for Info 302-2V, 3-Speed Auto One of 2,106 made One of 405 sent to Canada. Yes those are caution lights, and No you can't pass me when there on. Ricer Hater's Club - Member #4

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1988 Gt - 1998 Gt Hp Each Year	steedamustang01	Modular Madness	13	05-09-2002 07:26 PM
1996 Cobra vs 2000 Mustang GT	Milktasd	Stang Stories	2	04-05-2002 03:11 AM
RESULTS - Grand Prix GT vs. Celica GTS	302 LX Eric	Stang Stories	7	09-25-2001 06:46 PM
ran a '01 GT	EZRIDN	Stang Stories	3	08-29-2001 08:17 PM
Whooped an '85 GT with my Wife's Volvo	NO SLO PK	Stang Stories	8	07-20-2001 12:46 PM