Sun visor fix

gtnby2 · 07-22-2003, 11:33 PM

My sun visors on both sides keep falling...has anyone else had this problem and how did you fix it? I tried Velcro but it won't stay stuck when its this hot out side and it's pissin' me off to have a visor drop in my eyes at 110mph when my windows are down!!!!
HELP!!
Brad

RED92LX50 · 07-23-2003, 11:33 AM

Not sure how yours attach, but I had a problem in my Vert with the visor popping out of the clip when I would accelerate quickly - nearly hit me in the head! I took a roll of black electrical tape and wound several layers around the bar-end of the visor (basically making the inserted rod fatter) - this held it very tight in the clip, and I have not had any problems since.

gtnby2 · 07-23-2003, 11:37 AM

Thanks, Thought about something like that but wasn't sure.....
Brad

Adam94GT · 07-23-2003, 02:03 PM

I don't know if this would work on yours, but on my dad's '72 we had this problem. What we did was stick a small rubber hose on the end of the visor, it worked very well and looks factory. The ends on the hose are closed.

gtnby2 · 07-23-2003, 08:24 PM

Thanks Adam,
I think the hose Idea would work well also......I think I'll try it.
Brad

I see you live In O'fallon, that about 50 miles from me. Are there any good races over there?

Katmandu · 07-24-2003, 04:48 AM

Quote:

Originally posted by RED92LX50
Not sure how yours attach, but I had a problem in my Vert with the visor popping out of the clip when I would accelerate quickly - nearly hit me in the head!

I need a pair of black visors for my 89 Vert.

Can anyone tell me if they are the same as Non-Verts ??

07-22-2003, 11:33 PM	#1
gtnby2 Registered Member Join Date: Aug 2001 Location: Woodlawn IL,USA Posts: 62	Sun visor fix My sun visors on both sides keep falling...has anyone else had this problem and how did you fix it? I tried Velcro but it won't stay stuck when its this hot out side and it's pissin' me off to have a visor drop in my eyes at 110mph when my windows are down!!!! HELP!! Brad

07-23-2003, 11:33 AM	#2
RED92LX50 Registered Member Join Date: Aug 1999 Location: Fairfax, VA Posts: 220	Not sure how yours attach, but I had a problem in my Vert with the visor popping out of the clip when I would accelerate quickly - nearly hit me in the head! I took a roll of black electrical tape and wound several layers around the bar-end of the visor (basically making the inserted rod fatter) - this held it very tight in the clip, and I have not had any problems since. __________________ 1992 LX 5.0 Convertible Red/Blk Gears, Exhaust, bolt-ons... R.H.C. #51

07-23-2003, 02:03 PM	#4
Adam94GT Registered Member Join Date: Jun 2003 Location: O'Fallon, MO Posts: 32	I don't know if this would work on yours, but on my dad's '72 we had this problem. What we did was stick a small rubber hose on the end of the visor, it worked very well and looks factory. The ends on the hose are closed. __________________ ----------- Adam M. Bullard 1994 Ford Mustang GT Too many mods since last E.T. http://www.geocities.com/adam94gt

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

07-23-2003, 11:37 AM	#3
gtnby2 Registered Member Join Date: Aug 2001 Location: Woodlawn IL,USA Posts: 62	Thanks, Thought about something like that but wasn't sure..... Brad

07-23-2003, 08:24 PM	#5
gtnby2 Registered Member Join Date: Aug 2001 Location: Woodlawn IL,USA Posts: 62	Thanks Adam, I think the hose Idea would work well also......I think I'll try it. Brad I see you live In O'fallon, that about 50 miles from me. Are there any good races over there?