Question about t5

cucho · 11-20-2003, 04:37 PM

Does the T5 in a 6 cyl can hold in my 8 cyl. i ran 12.8 and 1.68 in the 60 ft. cause the t5 of the 4 cyl. is not good fora 8 cyl rigth.

GhOsT6_9 · 11-20-2003, 08:22 PM

Don't use any tranny that isn't out of a V-8. If its anything less then your Stang is gonna rip it to pieces.

With 12.8's you should think about getting a beefier tranny, such as a Tremec TKO or WC T-5.

11-20-2003, 04:37 PM	#1
cucho Registered Member Join Date: Oct 2003 Location: Mexico Posts: 50	Question about t5 Does the T5 in a 6 cyl can hold in my 8 cyl. i ran 12.8 and 1.68 in the 60 ft. cause the t5 of the 4 cyl. is not good fora 8 cyl rigth.

11-20-2003, 08:22 PM	#2
GhOsT6_9 Registered Member Join Date: May 2000 Location: Ontario,Canada Posts: 233	Don't use any tranny that isn't out of a V-8. If its anything less then your Stang is gonna rip it to pieces. With 12.8's you should think about getting a beefier tranny, such as a Tremec TKO or WC T-5. __________________ 1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another tire question	96Saleen	Modular Madness	6	02-10-2004 05:27 PM
A stupid question I hate asking about exhaust sound	jwboner	Windsor Power	4	08-05-2003 05:55 PM
simple question	Lonzo	Classic Mustangs	3	09-10-2002 09:37 AM
Question about 2002 Ford Mustang Cd Deck	nissanNICK	Windsor Power	0	03-07-2002 10:08 PM
Newby here, I have a question on Odometers	mustangmama	Blue Oval Lounge	3	03-03-2001 06:43 AM