Horsepower guess's?

Smokedawg · 06-28-2001, 03:17 PM

How much horsepower should this combo make on and off the supercharger. Thanks

347 stroker motor
4340 steel crank
4340 eagle h-beam rods
J E pistons
Canton 7 qt oil pan
Vortech S-trim supercharger polished
Edelbrok Performer heads 2.02 1.60
Crane Pro Race Gold 1.6 ratio
Chrome Valve covers
GT-40 fully ported lower intake
Downs Ford upper intake polished
75 mm T-body Accufab polished
77 mm mass air Pro-M
Anderson Ford Power pipes
Vortech Super Blow off valve
Msd ignition Msd Distributor
30lb injectors with 6:1 FMU which comes to 60lb injectors
JBA headers
H-Pipe
Flowmaster 2 chamber exhaust
Sub-Frame connectors
Southside Lift bars
70/30 50/50 Lakewood shocks & airbag
Battery relocated in trunk
16in Saleen Rims (5)
Welds w/ Slicks
Cobra Trans
Custom Cam for Blower

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

PKRWUD · 06-28-2001, 04:12 PM

What compression are the pistons, how much boost do you expect, and do you have any of the specs on the cam?

06-28-2001, 03:17 PM	#1
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Horsepower guess's? How much horsepower should this combo make on and off the supercharger. Thanks 347 stroker motor 4340 steel crank 4340 eagle h-beam rods J E pistons Canton 7 qt oil pan Vortech S-trim supercharger polished Edelbrok Performer heads 2.02 1.60 Crane Pro Race Gold 1.6 ratio Chrome Valve covers GT-40 fully ported lower intake Downs Ford upper intake polished 75 mm T-body Accufab polished 77 mm mass air Pro-M Anderson Ford Power pipes Vortech Super Blow off valve Msd ignition Msd Distributor 30lb injectors with 6:1 FMU which comes to 60lb injectors JBA headers H-Pipe Flowmaster 2 chamber exhaust Sub-Frame connectors Southside Lift bars 70/30 50/50 Lakewood shocks & airbag Battery relocated in trunk 16in Saleen Rims (5) Welds w/ Slicks Cobra Trans Custom Cam for Blower ------------------ 347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free Horsepower	Spyder319	Power Adders	2	04-05-2004 03:26 PM
How come horsepower tv gained a very small amount of hp off a 70mm TB on a 97 stang?	96_4.6	Modular Madness	14	12-07-2003 01:07 AM
raced a Supra Twin Turbo	Stang35th	Stang Stories	63	08-23-2003 12:36 AM
Please Comment of Speed Secret # 2	jim_howard_pdx	Windsor Power	20	11-06-2002 11:44 AM
Horsepower TV's response to my e-mail	MTU 50	Blue Oval Lounge	19	10-28-2002 02:55 PM

06-28-2001, 04:12 PM	#2
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	What compression are the pistons, how much boost do you expect, and do you have any of the specs on the cam?