'65 Fastback project near completion

[95Convert]

We are close to getting the '65 project complete. You can see some pics at http://home.earthlink.net/~cbzfan Here are the specs:

Exterior Specs

Body:
1965 Ford Mustang Fastback

Color:
Patriot Blue Pearl w/ Diamond White Peal striping

Hood:
Unlimited Products 2 ½ inch cowl

Driving Lights:
Stock 1965 Mustang GT


Interior Specs

Upholstery:
Custom, White

Carpet Color:
Ford Dark Blue

Front Seats:
1998 Mustang

Rear Seat:
Stock fold-down

Gauges:
JMS Billet housing w/ AutoMeter “Phantom” gauges

Steering Wheel:
14 inch LeCarra Billet w/blue trim



Engine Specs

393 CID

Block:
1969 351W with .030 in. overbore

Crankshaft:
Scat forged 3.850 in. stroke

Connecting Rods:
Manley H-beam, 5.955 in. long

Pistons:
Probe 9.5:1, forged

Piston Rings:
Speed-Pro, plasma moly

Main Bearings:
Federal Mogul

Connecting Rod Bearings:
Federal Mogul

Camshaft Bearings:
Federal Mogul

Camshaft:
CompCam retrofit hydraulic roller Duration at .050: (Int 242, Exh 248) Lift (Int .576 Exh .600) 110 degrees lobe separation. CompCams Roller Cam Retrofit Kit with Lifters

Timing Set:
Cloyes True Roller

Harmonic Damper:
ATI

Oil Pump:
Melling high volume

Oil Pump Pickup:
Moroso

Oil Pump Shaft:
Ford Motorsport

Oil Pan:
Moroso 7 quart

Cylinder Heads:
Edelbrock Victor Junior, Aluminum 2.02 int, 1.60 exh valves

Rocker Arms:
CompCams, Magnum roller, 1.6 ratio

Pushrods:
CompCams, chromemoly, 8.500 in. long

Valve Covers:
Ford Racing

Intake Manifold:
Edelbrock Performer RPM airgap

Carburetor:
Barry Grant, 750 cfm, mechanical secondaries

Distributor:
MSD Billet

Ignition Coil:
MSD Blaster 2

Spark Plug Wires:
MSD

Pulleys:
March Billet Aluminum

Alternator:
Stock 1965 Ford

Water Pump:
Ford Racing

Gasket Set:
Fel-Pro

Engine Studs, bolts, retainers, etc:
ARP

Main Stud Girdle:
Coast High Performance

Headers:
Hedmann 351W swap 1 ¾ primary tubes

Engine Fan:
16 inch electric Spal puller (2550 cfm)

Radiator:
Griffin Aluminum 4-row

Starter:
PowerMaster Hi-Torque



Transmission Specs

Transmission:
Tremec T-56

Flywheel:
McLeod Aluminum w/ steel insert

Clutch and Pressure Plate:
McLeod Street Twin

Driveshaft:
Custom Length Steel

Clutch Cable:
Adapted late-model mustang w/ firewall adjuster

Shifter:
Steeda Tri-Ax for T-56

Shifter Handle:
Custom “long-stye” for Tri-Ax



Rear End Specs

Housing:
Stock Ford 8-Inch

Carrier:
Ford Nodular

Differential:
Detroit Locker, positive traction

Ring and Pinion:
Ford Racing, 3.80

Axles:
Moser forged, 28-spline




Suspension Specs

Front:
620lb, 1 inch lower, coil springs

Rear:
Shelby, mid-eye, 4-leaf spings

Front Swaybar:
PST 1 1/8” diameter

Rear Swaybar:
N/a

Shocks:
Gabriel GasAdjust

Subframes:
MustangsPlus Full-length sub-frame connectors

Traction Device:
Shelby-style under-ride traction bars

Wheels:
Centerline Billet “Mohave” 17x8 4.5 inch backspace

Tires:
Goodyear VR 245/45-17

Brakes:
Stock 4-wheel manual drum (Soon to be converted to front disc set-up)

[mustangII460]

If I didn't have a Cobra, Id have that.

Real nice car.

Wheel tax, don't you hate it.

[95Convert]

Originally posted by mustangII460
If I didn't have a Cobra, Id have that.

Real nice car.

Wheel tax, don't you hate it.

Thanks for the compliments. I am 99% sure my next project will be a Cobra replica.

[mustangII460]

I was hooked on Cobras early on.

Ive had all kinds of Mustangs, torinos, fairlanes, bla bla bla.

Nothing even comes close to fun this thing brings me. Can't really explain. One ride through town and anyone would see. If I knew it was this much fun, I would have done it years ago.

Thanks to video games almost every kid knows what it is. Its funny seeing a 9 year old pulling on his dad yelling COBRA COBRA COBRA!

Is it real, yes, just not real old

If your over this way, sevierville etc, we'll ride.

[95Convert]

Sounds good to me. Have you checked out this site yet:

www.tennesspeed.net