narrowing 8.8 rear

84GT350-1 · 10-10-2004, 08:41 AM

I am looking to narrow an 8.8 for use in my 89 coupe and retain the stock four link setup. I also want to use the Moser 9" ends instead of the C-clip eliminators and use a deeper wheel(3.5" back space). Moser has to cut the housing for the the new ends anyway so I figured it could be narrowed some. Has anyone done this or have any ideas or advice. Thanks....

andy669 · 10-10-2004, 10:15 AM

You will want to be careful on your brake selection. Since all the shortening will be done outside of the LCA and shock mounts, you will have trouble with the calipers hitting the shocks. In a friends car we were able to get a Wilwood kit to work by mounting the calipers on the very bottom.

Andy

84GT350-1 · 10-10-2004, 10:58 AM

Thanks Andy669. Should have mentioned I will be using the stock drum brakes as crazy as that sounds. I think Moser said the ends were about 2.25" long so that does not leave much room for cutting and welding..How much did your buddy cut his 8.8 housing and retain all the stock mounts?

andy669 · 10-10-2004, 11:09 AM

Im not sure exactly how much was cut off of it. He uses a 3 7/8 bs wheel. Mine is shortened 2.5 and I use a 5.5 wheel.

Andy

10-10-2004, 08:41 AM	#1
84GT350-1 Registered Member Join Date: Nov 1999 Location: Willard Ohio Posts: 60	narrowing 8.8 rear I am looking to narrow an 8.8 for use in my 89 coupe and retain the stock four link setup. I also want to use the Moser 9" ends instead of the C-clip eliminators and use a deeper wheel(3.5" back space). Moser has to cut the housing for the the new ends anyway so I figured it could be narrowed some. Has anyone done this or have any ideas or advice. Thanks.... __________________ 1967 mustang fastback drag car. tube chassis. 468 BBF.. 1989 LX notch 1982 GT 2003 F350 6.0

10-10-2004, 10:15 AM	#2
andy669 Registered Member Join Date: Jan 2001 Location: Moline Il Posts: 901	You will want to be careful on your brake selection. Since all the shortening will be done outside of the LCA and shock mounts, you will have trouble with the calipers hitting the shocks. In a friends car we were able to get a Wilwood kit to work by mounting the calipers on the very bottom. Andy __________________ 88 coupe 91 LX NMRA Pure Street 5120

10-10-2004, 10:58 AM	#3
84GT350-1 Registered Member Join Date: Nov 1999 Location: Willard Ohio Posts: 60	Thanks Andy669. Should have mentioned I will be using the stock drum brakes as crazy as that sounds. I think Moser said the ends were about 2.25" long so that does not leave much room for cutting and welding..How much did your buddy cut his 8.8 housing and retain all the stock mounts? __________________ 1967 mustang fastback drag car. tube chassis. 468 BBF.. 1989 LX notch 1982 GT 2003 F350 6.0

10-10-2004, 11:09 AM	#4
andy669 Registered Member Join Date: Jan 2001 Location: Moline Il Posts: 901	Im not sure exactly how much was cut off of it. He uses a 3 7/8 bs wheel. Mine is shortened 2.5 and I use a 5.5 wheel. Andy __________________ 88 coupe 91 LX NMRA Pure Street 5120

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new rear end	fordkid68	Classic Mustangs	18	11-24-2009 08:05 PM
What kind of rear end do I have?	Stang_ROTY	Windsor Power	3	01-29-2005 02:46 PM
want rear disk without changing overall length of rear....please help!!!	dragstang86	Windsor Power	1	07-31-2003 06:32 PM
installing cobra rear in my LX...picked up a totaled 93 limited edition	dragstang86	Windsor Power	1	05-26-2003 11:23 AM
Rear Brake Line Removal	Kisner	Classic Mustangs	2	03-13-2002 12:31 PM