BBK Intake and computer/injector question

mrpink · 06-15-2005, 06:58 AM

Guys, I am looking at the new BBK SSI intake for my car. I have a motor that was installed by the previous owner so I don't know the whole story. It's in an '89. It has cam, headers, GT40P heads, Ford/Crane roller rockers, Cobra intake. I have put on an Edlebrock 70mm TB and a Granatellie MAS for 19# injectors. Question: if I go with this intake and 24# injectors, do I have to change the computer or just the MAS? Will the computer adjust itself? Thanks,
Jim

blackEagle · 06-15-2005, 09:01 AM

Changing injectors requires a re-calibrated mas air or computer upgrade via a chip.

mrpink · 06-15-2005, 09:08 AM

Larry, I understand I need a new MAF for 24#. But, do I need to do anything to the computer or replace it?

blackEagle · 06-15-2005, 11:00 AM

Quote:

Originally Posted by mrpink

Larry, I understand I need a new MAF for 24#. But, do I need to do anything to the computer or replace it?

No changes to the EEC are needed with a properly calibrated MAF. There are articles here on EEC and MAF processing. Check them out as there is good info in them.

mrpink · 06-15-2005, 12:40 PM

Thanks for the help.

06-15-2005, 06:58 AM	#1
mrpink Registered Member Join Date: Aug 2003 Posts: 17	BBK Intake and computer/injector question Guys, I am looking at the new BBK SSI intake for my car. I have a motor that was installed by the previous owner so I don't know the whole story. It's in an '89. It has cam, headers, GT40P heads, Ford/Crane roller rockers, Cobra intake. I have put on an Edlebrock 70mm TB and a Granatellie MAS for 19# injectors. Question: if I go with this intake and 24# injectors, do I have to change the computer or just the MAS? Will the computer adjust itself? Thanks, Jim

06-15-2005, 09:01 AM	#2
blackEagle Registered Member Join Date: Mar 1999 Location: Calumet City, IL, USA Posts: 39	Re: BBK Intake and computer/injector question Changing injectors requires a re-calibrated mas air or computer upgrade via a chip. __________________ Larry Bosley 1995 Mustang GT(R.I.P.) 2002 GT

06-15-2005, 09:08 AM	#3
mrpink Registered Member Join Date: Aug 2003 Posts: 17	Re: BBK Intake and computer/injector question Larry, I understand I need a new MAF for 24#. But, do I need to do anything to the computer or replace it?

06-15-2005, 12:40 PM	#5
mrpink Registered Member Join Date: Aug 2003 Posts: 17	Re: BBK Intake and computer/injector question Thanks for the help.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Explore intake???????????	William Bowers	Windsor Power	2	02-14-2002 10:27 PM
HELP!!! oil in intake, what to do??	bosco	Windsor Power	4	02-03-2002 05:02 PM
Edelbrock spec's and intake question??	jerryIII	Windsor Power	0	05-24-2001 12:49 PM
OIL IN INTAKE almost sure from 'pcv'	QUIN	Windsor Power	8	03-09-2001 01:58 PM
Is the true about Edelbrock heads with TFS intake?	gt93mustang	Windsor Power	14	03-06-2001 07:01 PM