Where can I buy a 30# sample tube from????

Dark_5.0 · 09-19-2005, 12:42 PM

I need a 30# sample tube for my 73mm Pro-m mass air sensor and dont know where I can buy one from.

Gearing up for my Vortech supercharger install.

silver_pilate · 09-19-2005, 05:05 PM

I would guess you may have to go through Pro-M. I had to change sampling tubes on my 76mm C&L and had to contact C&L directly to get the right sampling tube. Nobody I could find stocks just the tubes.

--nathan

Falcons Talon · 09-19-2005, 05:13 PM

I heard pro-m went out of business...if so, that makes contacting them a little bit harder...

lx mike · 09-19-2005, 07:23 PM

I thought pro-m's you had to get recalibrated for bigegr injectors?

Dark_5.0 · 09-20-2005, 08:25 AM

Quote:

Originally Posted by lx mike

I thought pro-m's you had to get recalibrated for bigegr injectors?

No it has sample tubes. It has the stock 19# electronics and you just change out the tubes. i have a 19 and a 24# tube but I need a 30 and 36#.

Maybe I will get lucky and find one on ebay.

You are correct Mike.

I bought my Mass air sensor at a swap meet. The guy I bought it from said it was a Pro-M he was wrong it is a C & L mass air sensor which is a good thing.

09-19-2005, 12:42 PM	#1
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	Where can I buy a 30# sample tube from???? I need a 30# sample tube for my 73mm Pro-m mass air sensor and dont know where I can buy one from. Gearing up for my Vortech supercharger install. __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer

09-19-2005, 05:05 PM	#2
silver_pilate DURKA DURKA!! Join Date: Sep 1997 Location: Lubbock, TX...(TX panhandle) Posts: 1,418	Re: Where can I buy a 30# sample tube from???? I would guess you may have to go through Pro-M. I had to change sampling tubes on my 76mm C&L and had to contact C&L directly to get the right sampling tube. Nobody I could find stocks just the tubes. --nathan __________________ '91 GT, Coast 347, 9.5:1 compression, full intake, Wolverine 1087 cam, exhaust, Keith Craft ported Windsor Jr. Irons (235 cfm intake, 195 cfm exhaust), AOD, PI 3500 converter, Lentech valve body, 3.73's (4.10's in the works), and Yokohama ES100's out back. Daily Car: '04 Infiniti G35 Sedan 6MT

09-19-2005, 05:13 PM	#3
Falcons Talon T.P.M. President Join Date: May 2002 Location: Brownsville Posts: 265	Re: Where can I buy a 30# sample tube from???? I heard pro-m went out of business...if so, that makes contacting them a little bit harder... __________________

09-19-2005, 07:23 PM	#4
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	Re: Where can I buy a 30# sample tube from???? I thought pro-m's you had to get recalibrated for bigegr injectors? __________________ Rice Haters Club Member #101

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What size sample tube?	Agent_4573	Windsor Power	0	08-29-2002 06:42 PM
Bullit Intake Aftercooled Discharge Tube	SlwGT	Modular Madness	0	06-10-2002 08:27 PM
I want to remove my EGR tube	moponys	Windsor Power	0	12-04-2001 10:54 AM
Oilpan, dipstick tube leak...help!	chris91LX	Windsor Power	2	02-17-2001 01:26 AM
What to do about the air tube with my BBK LT h-pipe	Jason Van Holland	Windsor Power	4	01-17-2001 04:35 PM