Flywheel specs

Scrapla · 01-26-2006, 04:37 PM

How many teeth are on a stock flywheel I have a 90 GT. Im looking for an aftermarket flywheel for my 347 stroker motor going in soon. And do you guys recomend a nice dampener I heard a 280oz for a 347 stroker is perfect.

~The Jester~ · 01-26-2006, 06:42 PM

My standard answer: ALL of them!

http://forums.mustangworks.com/showthread.php?t=47577

Scrapla · 01-27-2006, 11:43 AM

Thanks, I couldnt find that post, I know I asked before.

fiveohpatrol · 01-28-2006, 06:39 PM

Quote:

Originally Posted by Scrapla

How many teeth are on a stock flywheel I have a 90 GT. Im looking for an aftermarket flywheel for my 347 stroker motor going in soon. And do you guys recomend a nice dampener I heard a 280oz for a 347 stroker is perfect.

well the balancers will come in 0/neutral, 28/28.2, or 50oz counterbalance. You must buy the balancer at which your engine was balanced to. A factory HO 302 is a 50oz balance, whereas MOST 347's are balanced to 28, but you have to determine which one yours is before you buy a balancer OR a flywheel. Some of the aftermarket balancers and flywheels have removeable/interchangable weights so they can be used with any balance engine, but you have to know which one to use

Scrapla · 01-28-2006, 07:25 PM

Thanks, my mechanic asked me to order the 28oz balanced wheel

01-26-2006, 04:37 PM	#1
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Flywheel specs How many teeth are on a stock flywheel I have a 90 GT. Im looking for an aftermarket flywheel for my 347 stroker motor going in soon. And do you guys recomend a nice dampener I heard a 280oz for a 347 stroker is perfect. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

01-26-2006, 06:42 PM	#2
~The Jester~ Rat Killer Join Date: Aug 2002 Location: Cold ass Ohio Posts: 1,143	Re: Flywheel specs My standard answer: ALL of them! http://forums.mustangworks.com/showthread.php?t=47577 __________________ d-Con Racing "Nothing fancy, just 347 inches of RAT POISON!" MICE need not apply.....

01-27-2006, 11:43 AM	#3
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Re: Flywheel specs Thanks, I couldnt find that post, I know I asked before. __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

01-28-2006, 07:25 PM	#5
Scrapla Registered Member Join Date: Apr 2002 Location: Florida Posts: 532	Re: Flywheel specs Thanks, my mechanic asked me to order the 28oz balanced wheel __________________ 90gt 347 and some bolt ons :-) RICE HATERS MEMBER #73

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
is the analizer flywheel or rearwheel horepower??	superduty	Blue Oval Lounge	5	08-02-2004 08:52 AM
'85 4-cyl. T-5 tranny: flywheel specs	orgfish	Small Ponies	0	03-02-2004 09:09 PM
Fidanza Flywheel Dowel Pins	RICKYRM125CC	Windsor Power	0	10-27-2002 07:42 PM
Aluminum Flywheel Help	buck95	Windsor Power	6	12-02-2001 07:29 AM
Flywheel	Phantom5oh	Windsor Power	15	09-26-2001 04:44 PM