Clutch is Slipping and T5 is busted!!!!

NO SLO PK · 01-27-2001, 03:09 PM

I'm bummed out. The Centerforce finally "lost" to the supercharger and other bolton junk. On top of that, the T5 is making noise and I think I have a blown head gasket.

So my buddy can furnish and install a TKO for $1,800 which includes clutch, bellhousing, Tri-ax shifter, driveshaft, etc.

I mean, I don't really have the money to spend but it sounds like a pretty good deal.

What do you think?

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

Rick 91GT · 01-27-2001, 03:26 PM

$1800.00 Sounds like a great deal to me, I think the tranny only goes for that much, plus the bellhousing, clutch and drive shaft.

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

01-27-2001, 03:09 PM	#1
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	Clutch is Slipping and T5 is busted!!!! I'm bummed out. The Centerforce finally "lost" to the supercharger and other bolton junk. On top of that, the T5 is making noise and I think I have a blown head gasket. So my buddy can furnish and install a TKO for $1,800 which includes clutch, bellhousing, Tri-ax shifter, driveshaft, etc. I mean, I don't really have the money to spend but it sounds like a pretty good deal. What do you think? ------------------ '91 LX Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clutch prob	chatcher	Windsor Power	3	09-30-2004 08:46 PM
Clutch slipping, need help	bmxmon	Classic Mustangs	2	06-08-2004 12:54 AM
more than a clutch slipping!!	Coupe50h	Windsor Power	3	07-27-2003 02:27 PM
Clutch slipping in 2nd, above 4000 rpm?	Fox Body	Windsor Power	7	05-22-2003 06:27 PM
Smoked my clutch	bri32z	Blue Oval Lounge	2	11-01-2001 09:52 PM

01-27-2001, 03:26 PM	#2
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	$1800.00 Sounds like a great deal to me, I think the tranny only goes for that much, plus the bellhousing, clutch and drive shaft. ------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98