12 sec 306 head and intake combo - Page 2

Skyman · 12-19-2001, 03:42 PM

Damn rick I didnt know you hit 11's, thats awesome!

Do you still have the stock rear and trans?

Skyler

Rick 91GT · 12-19-2001, 05:00 PM

Quote:

Originally posted by Skyman
Damn rick I didnt know you hit 11's, thats awesome!

Do you still have the stock rear and trans?

Skyler

Yep

STOCK REAR/AXLES and a built T-5 w/ 5800rpm launches

I think it will go in the 11.70's the way it sits, and with the 4:30's and rear and axles package I am doing this winter 11.40's. My Speedbrain shows 438FWHP @ 6350rpms and in the past it was only off 2HP on the dyno, that would be awesome! @ 375RWHP

Did you get that oil pump shaft fixed?

fiveohpatrol · 12-20-2001, 03:58 PM

ported E7's all the way!

my mph should have me atleast in the high 12's, but traction and tranny problems (couldnt hammer 2nd or 3rd gear) held me back this year. A B303 cam (found cheap on Ebay, thats why

) and a fresh tranny will be in for spring and I'm hoping to hit 12.90's or better on drag radials. If not I'll slap on my slicks and make a run for it, hopefully not shatter my T-5 or axles

1986gt · 12-22-2001, 04:55 PM

My car goes 12.90@105 with edelbrock 6039 and performed 5.0 intake N/A

12-19-2001, 03:42 PM	#21
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Damn rick I didnt know you hit 11's, thats awesome! Do you still have the stock rear and trans? Skyler __________________ 2001 BMW M3 6spd 12.79@108 RIP ---- 1993 Notch w/ 98 4V 4.6 Fasttt... -1989 Saleen Mustang #406- 12.32@109 -1999 Black Cobra Coupe- JBA Shorties, Bassani Cat-X, Magnaflow 3", Pulleys, 85mm Pro-M, Ported Intake, Soild Rear w/ 4.30s, Tubular Front End, X2C arms, 13lb batt, few others.

12-20-2001, 03:58 PM	#23
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	ported E7's all the way! my mph should have me atleast in the high 12's, but traction and tranny problems (couldnt hammer 2nd or 3rd gear) held me back this year. A B303 cam (found cheap on Ebay, thats why ) and a fresh tranny will be in for spring and I'm hoping to hit 12.90's or better on drag radials. If not I'll slap on my slicks and make a run for it, hopefully not shatter my T-5 or axles __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

12-22-2001, 04:55 PM	#24
1986gt Registered Member Join Date: Sep 1998 Location: Berea Ky Posts: 17	My car goes 12.90@105 with edelbrock 6039 and performed 5.0 intake N/A __________________ 1986gt Vortech S-trim SQ,off road H-pipe,Edelbrock Intake, 1.7 rockers, 3.73gear,edelbrock 6039 cylinder heads and f303 cam. Best run so far 10.78@127.40 and 1.50 60 foot.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Head and intake flow. Something to think about. :)	5ohCOUPE	Windsor Power	3	03-16-2003 08:52 AM
What head gaskets and intake gaskets??	dragstang86	Windsor Power	4	12-20-2002 04:20 AM
Speed Secret # 3	jim_howard_pdx	Windsor Power	13	11-09-2002 10:35 AM
Head, Cam, Intake Combo....	Bluefox91LX	Windsor Power	2	10-20-2002 01:48 AM
Head gasket or intake leak?	Frankenstang65	Classic Mustangs	9	09-14-2002 06:16 PM