MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 10-24-2002, 07:29 PM   #1
90lxracer
Registered Member
 
Join Date: Oct 2002
Location: houston, Texas
Posts: 65
Default 1st time at track

Hey guys, I bought the car in my sig a couple weeks back and am trying to get out to the track ( I hate rain) and i have never been before. Everything on it is stock except for flows and new installed underdrive pulleys. I have crappy street tires that are 225's w/most of the tread. I was wondering launch RPM's or going from an idle and any tips you guys have. It's my project car and i wanted to get some times before i started to really get into the engine performance. Thanks in advance.
__________________
1990 lx 5.0L 5 spd.
BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/
pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys

1997 Chevy Silverado Z71 4x4
6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges
90lxracer is offline   Reply With Quote
Old 10-24-2002, 11:53 PM   #2
gofastmercury
Registered Member
 
gofastmercury's Avatar
 
Join Date: May 2001
Location: calgary alberta canada
Posts: 366
Default

Congrates on the new car, you'll love it.

If you have a stick car...Try leaving at just off idle. any tire spin really kills your time. Also shift at 5200ish. It seems low, but it works. I shift at 5400 for first and 5200 for the rest. "Should" get you in the mid to high 14's if your track is at sea level. Good luck and keep the shiny side up!
__________________
93LXcopcarSOLD14.3@96 @ 4500ft 2.02 60ft on street tires.
my 67 ranchero NOT A 390 ANY MORE! 460! 3.70's cast manifolds, comp cams 262H, performer, 750DP 100K out of 79 F250
NEW(oct20/02)14.58@95mph 2.3 60 ft
corrects to:13.86@100
66 merc comet351w, isky roller 600 lift 268/260@.050, vic jr. 700DP, 5000stall, 4.56's c-4, 3400lbs with driver
12.3@110 @ 4000ft 1.69 60 ft
corrects to:11.69@115
gofastmercury is offline   Reply With Quote
Old 10-25-2002, 12:26 AM   #3
Coupe50h
Registered Member
 
Coupe50h's Avatar
 
Join Date: Aug 2002
Location: SanAntonio, Tx
Posts: 957
Default

Quote:
Originally posted by gofastmercury
Congrates on the new car, you'll love it.

If you have a stick car...Try leaving at just off idle. any tire spin really kills your time. Also shift at 5200ish. It seems low, but it works. I shift at 5400 for first and 5200 for the rest. "Should" get you in the mid to high 14's if your track is at sea level. Good luck and keep the shiny side up!
good post, thats where i shift to 2nd

anyway leaving at idle might bogg with stock gears, but get the rpm right, takes practice, my style worked for me since i always allowed roll out riding the clutch so the tires wouldn be shocked, i pulled the front swaybar and went 1.98 60' on a good track..... but it took some time getting that launch down, with 273 grs it will be tricky, just have fun
__________________
X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's.
race weight 3,160

12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear

13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear
Coupe50h is offline   Reply With Quote
Old 10-25-2002, 05:14 PM   #4
90lxracer
Registered Member
 
Join Date: Oct 2002
Location: houston, Texas
Posts: 65
Default

Thanks on the replys but unfortunately I will not be able to make it to the track, due to a couple inches of rain. Hopefully i will be able to make out next weekend.
__________________
1990 lx 5.0L 5 spd.
BBk Lt's/BBK o/r x-pipe/2 chamber flows/holley systemax upper intake/holley systemax lower intake/holley systemax heads/Lunati cam/timing chain/fms 1.6 rr's/
pro-m 80mm mass air/ 24# injectors/ 190lbh./fuel pressure regulator/BBK 70mm tb/BBK 70mm egr spcr/fms 3.73 gear/Fluidyne Aluminum Radiator/Ford Racing Water pump/Underdrive pulleys

1997 Chevy Silverado Z71 4x4
6'' Pro-comp triple shock lift / 35x12.5 Pro-comp x-terrains on 15x10 welds / 4.56 gear / hypertech power programmer / Flowmaster 40 series exhaust / 2 12'' Audiobahn subs powered by houston acoustic 900 watt amp / white face gauges
90lxracer is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ran at track 1st time! Timeslips! 13 in 1/4! 84LX89GT Blue Oval Lounge 0 07-13-2002 01:18 AM
First time at the track? OUTPLAYN Windsor Power 9 05-01-2002 01:16 PM
going to the track for first time HiFlow5 0 Racer's Club House 3 09-17-2001 11:24 AM
1st Time at the track with notchback JRowlette Racer's Club House 9 05-17-2001 12:02 AM
1st time at the track stanger8172 Racer's Club House 1 04-25-2001 06:22 AM


All times are GMT -5. The time now is 08:35 AM.


SEARCH