Does anyone have a procedure for removing the heads on a 302 carb?

twilightcall · 06-09-2003, 05:32 PM

I was wondering if anyone has a procedure for removing the heads on a 302 carb engine?

Joe50 · 06-10-2003, 07:01 AM

Just unbolt stuff 'till you get the heads off...not much too it...label everything if you don't think you will remember where it goes.

twilightcall · 06-10-2003, 07:21 AM

Alright. How many of the accessory items need to come off? Like the a/c can I unbolt it but leave the lines attached so I don't have to have it evac?

Joe50 · 06-10-2003, 07:25 AM

All the accessories need to be unbolted, just the alternator really needs to be removed along with the tensioner bracket...the power steering and the ac compressor can both stay connected and just tied out of the way...

06-09-2003, 05:32 PM	#1
twilightcall Registered Member Join Date: May 2003 Posts: 86	Does anyone have a procedure for removing the heads on a 302 carb? I was wondering if anyone has a procedure for removing the heads on a 302 carb engine?

06-10-2003, 07:01 AM	#2
Joe50 Registered Member Join Date: Jan 2000 Location: Newport News, VA Posts: 78	Just unbolt stuff 'till you get the heads off...not much too it...label everything if you don't think you will remember where it goes. __________________ "Drive it like you stole it!" '94 Vibrant Red GT

06-10-2003, 07:25 AM	#4
Joe50 Registered Member Join Date: Jan 2000 Location: Newport News, VA Posts: 78	All the accessories need to be unbolted, just the alternator really needs to be removed along with the tensioner bracket...the power steering and the ac compressor can both stay connected and just tied out of the way... __________________ "Drive it like you stole it!" '94 Vibrant Red GT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
to carb, or not to carb...this is my question.	black86notch	Windsor Power	4	08-06-2002 08:24 PM
Carb Woahs	RoadWarrior	Classic Mustangs	4	07-27-2002 11:06 AM
??? about 351W heads on a 302	vande97	Windsor Power	2	05-15-2002 10:42 AM
For whoever it was considering using stock ported heads	2FastLX	Windsor Power	5	10-11-2001 01:53 PM
new carb..but how much cfm??	69PonyRider	Classic Mustangs	4	09-13-2001 07:59 AM

06-10-2003, 07:21 AM	#3
twilightcall Registered Member Join Date: May 2003 Posts: 86	Alright. How many of the accessory items need to come off? Like the a/c can I unbolt it but leave the lines attached so I don't have to have it evac?