need a clutch...

StormsofAres86gt · 07-09-2006, 03:15 PM

what clutch should i use for my set up in my mustang? i had a king cobra, obviously it was not supposed to do what i tried to make it do. it's already dead. are centerforce clutches any good? i originally bought a zoom comp clutch, but it was too big for my flywheel. so i had to send it back. but the king cobra is slippin a lot now. and i can barely drive the car. thanks for any help

82 GT · 07-11-2006, 10:29 AM

What are you trying to "make it do"? Maybe you're rough on clutches........

StormsofAres86gt · 07-11-2006, 10:40 AM

by that i meant the power it had. but evidentally i just had it glazed over a bit somehow. a guy that races windsors told me to drive it around for awhile and not slip it out so much and just dump it to get it cleaned up a bit. it's startin to feel a lot better

07-09-2006, 03:15 PM	#1
StormsofAres86gt black and blue Join Date: May 2005 Location: cinci. Posts: 84	need a clutch... what clutch should i use for my set up in my mustang? i had a king cobra, obviously it was not supposed to do what i tried to make it do. it's already dead. are centerforce clutches any good? i originally bought a zoom comp clutch, but it was too big for my flywheel. so i had to send it back. but the king cobra is slippin a lot now. and i can barely drive the car. thanks for any help __________________ '93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach

07-11-2006, 10:29 AM	#2
82 GT Import Slayer Join Date: May 1999 Posts: 2,241	Re: need a clutch... What are you trying to "make it do"? Maybe you're rough on clutches........ __________________ '82 GT 351W (.060)Comp Cams 274* Extreme Energy cam, ported & polished heads w/ 1.94/1.60 valves 10.3:1 flat top pistons,stealth intake, Mallory dizzy,Holley 750dp carb, BBK shorties,Flowmaster exhaust,C-4 with 3700 stall converter, B&M pro shifter,8.8 rear, 4:10's, subframes, electric fan, powermaster alternator, 4 core radiator.

07-11-2006, 10:40 AM	#3
StormsofAres86gt black and blue Join Date: May 2005 Location: cinci. Posts: 84	Re: need a clutch... by that i meant the power it had. but evidentally i just had it glazed over a bit somehow. a guy that races windsors told me to drive it around for awhile and not slip it out so much and just dump it to get it cleaned up a bit. it's startin to feel a lot better __________________ '93 3.0L SHO 5spd. '89 5.8L lx 5spd. 351W(349hp/384tq)-tfs twisted wedge(stage 2), rpm air-gap, comp cam(294/294:518/518) and lifters, kb .060 pistons(11.5:1), mac shorties, pypes o/r X, mac 2.5" all the way back, holley 750, march u/d pulleys...it's alive..it's back together and running strong -zach

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Needed: 8 1/2" Clutch Kit ofr 64.5 Mustang	orangepony	Classic Mustangs	1	09-18-2005 09:42 PM
Loud "pop" after clutch install, won't go into gear..	Chris_H	Windsor Power	3	08-11-2003 06:24 PM
T-5 swap & cable clutch problem	LuvMyStang	Classic Mustangs	0	03-19-2003 08:47 AM
Clutch Problems	blue302	Windsor Power	3	09-10-2001 01:37 PM
billed 5 times to install clutch by Pauls Auto, please read and give opinions (long)	beefcake	Blue Oval Lounge	2	02-23-2001 03:05 PM