MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Appearance & Detailing
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 01-16-2010, 01:49 PM   #1
braxus
Registered Member
 
Join Date: Jan 2010
Location: Fraser Valley B.C.
Posts: 4
Default 5 Lug Conversion For Fox Mustang

Looking for 18 inch wheels for a 1990-93 5.0L Mustang, there doesn't seem to be any options for the 18" size. So Im aware most people convert their cars to 5 lug bolts to fit this size of wheel. Anyway I know Ford Motorsport sells the rear axle kit under part # M 1226 A which is the axle shafts and drum. But I still need 5 lug front rotors for the stock brake system. What are my options for rotors that are from common sellers? I know Motorsport had a kit under M 1102- C, but there is question that rotor has been discontinued or not.

Last edited by braxus; 01-16-2010 at 02:22 PM..
braxus is offline   Reply With Quote
Old 01-18-2010, 07:46 PM   #2
braxus
Registered Member
 
Join Date: Jan 2010
Location: Fraser Valley B.C.
Posts: 4
Default Re: 5 Lug Conversion For Fox Mustang

Quote:
Originally Posted by braxus View Post
Looking for 18 inch wheels for a 1990-93 5.0L Mustang, there doesn't seem to be any options for the 18" size. So Im aware most people convert their cars to 5 lug bolts to fit this size of wheel. Anyway I know Ford Motorsport sells the rear axle kit under part # M 1226 A which is the axle shafts and drum. But I still need 5 lug front rotors for the stock brake system. What are my options for rotors that are from common sellers? I know Motorsport had a kit under M 1102- C, but there is question that rotor has been discontinued or not.
Anyone? I was researching and found 1984-86 Mustang SVO rotors may fit 1987-93 GT cars, and also Lincoln Mark 7 rotors. But Ford Racing mentioned the Lincoln rotors may be slightly large to fit properly, so this makes me think the same for SVO. Can anyone confirm these rotors work without modification or machining?

Last edited by braxus; 01-18-2010 at 10:27 PM..
braxus is offline   Reply With Quote
Old 01-28-2010, 09:04 PM   #3
D-SLO
Registered Member
 
Join Date: Mar 2004
Location: OHIO
Posts: 2
Default Re: 5 Lug Conversion For Fox Mustang

check into Lincoln town car rotors. I seem to recall that a buddy of mine did a conversion with these. I don't remember the year (early 90's mabey) but I do remember they were a direct bolt on with no modification at all. I'll let ya know if I can get in touch with him to find out more.
D-SLO is offline   Reply With Quote
Old 03-21-2010, 05:16 PM   #4
stanger66
dreaming about mustangs
 
stanger66's Avatar
 
Join Date: Mar 2006
Location: laurel, md
Posts: 178
Default Re: 5 Lug Conversion For Fox Mustang

FRPP M-1126-A 79-93 Mustang Rear 5-Lug Conversion : eBay Motors (item 350327776527 end time Apr-11-10 15:22:06 PDT) for the rear conversion

For the front
4 LUG TO 5 CONVERSION KIT - FORD MUSTANG 79-93 & OTHER : eBay Motors (item 290408935785 end time Apr-01-10 07:04:06 PDT)
__________________
Ross


06 Saleen S281SC Convertible 6spd
04 Freestar(wife)
66 mustang w/orig. Carroll Shelby racing 7 spoke 14X7's aluminum
02 pontiac sunfire 2.2 ecotec(great gas mileage) still GM junk
stanger66 is offline   Reply With Quote
Old 03-22-2010, 09:23 PM   #5
capri351
Registered Member
 
Join Date: Apr 2009
Location: Wyo, casper
Posts: 4
Default Re: 5 Lug Conversion For Fox Mustang

80s ranger rotors fit and one of the rear axles x2 fits in the rear end ... and some other small misc parts
capri351 is offline   Reply With Quote
Old 08-08-2010, 12:51 AM   #6
The_Nightmare_347
Rev. Magus M. Douglas Hockett
 
The_Nightmare_347's Avatar
 
Join Date: Jul 2010
Location: The Dimensional Planes
Posts: 9
Default Re: 5 Lug Conversion For Fox Mustang

Personally when converting the 4 bolt system I had stock on the 89 LX, I went with the 94-95 SN body spindles and bearings from JC Whitney all the way around, allowing for the Bear 14" big brake Pro-Plus sytem (4 piston calipers all the way around). JC Whitney was very helpful as well as the tech people at Baer. The thing is, even if you go this route, you have to get the pattern sheet from the rim manufacturer in order to send that to the co. manufacturing the rims if you are going to use anything over stock size rotors for stopping power. Being you say in your sn you have a 351, I assume, perhaps correctly, you want more stopping power than stock. The other way to go about this is to go with the Cobra Kit by Ford, p/n M-2300-K, which provides far more than enough stopping power for most applications. However, if you have a set up like mine, that is not exactly sufficient, lol. So I had to go with either the 13"ers or 14"ers with multiple piston calipers, albeight the 4 piston set up is a little overkill, by my own admission. Doesn't do too badly in point standings in the shows, and damn well stops on a dime when I hit the red line on the strip. So, really a matter of personal preference, choice, etc. and finances/money each person has available. Best of luck.
__________________
Reverend Magister M. Douglas "The Shadow" Hockett aka The_Nightmare_347www.darkpoetryfromagothicview.com
The_Nightmare_347 is offline   Reply With Quote
Old 10-25-2010, 08:40 PM   #7
Sheriff41
Registered Member
 
Join Date: Jan 2005
Posts: 2
Default Re: 5 Lug Conversion For Fox Mustang

Lincoln Mark VII front rotors or 84-86 Lincoln Continental front rotors are 11" and direct fit on the 87-93 5.0 Mustangs.
Sheriff41 is offline   Reply With Quote
Old 10-25-2010, 08:46 PM   #8
Sheriff41
Registered Member
 
Join Date: Jan 2005
Posts: 2
Default Re: 5 Lug Conversion For Fox Mustang

Lincoln Mark VII front rotors or 84-86 Lincoln Continental front rotors are 11" and direct fit on the 87-93 5.0 Mustangs.
Sheriff41 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
88 mustang maf conversion stude Windsor Power 7 10-27-2010 03:58 AM
Mustang 4 cyilnder 5 lug conversion using ranger rotors troutman48 Small Ponies 1 06-16-2009 10:11 PM
mustang 351 conversion jeffnichols Windsor Power 1 12-16-2003 08:24 AM
Mustang II front suspension conversion Danos Classic Mustangs 4 04-18-2002 12:25 AM
disk brake conversion for '65 Mustang 69roadrunner Classic Mustangs 4 08-05-2001 12:29 PM


All times are GMT -5. The time now is 05:06 PM.


SEARCH