![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
Registered Member
Join Date: Sep 1998
Location: Brookfield,Wisconsin,US
Posts: 23
|
![]() ok read down at the bottom and you can see whats in my car. yeah i finally got a fuel pressure regulator. it is a used blue billet paxton adjustible regulator for $35. i know how to put it on my fuel rail but i dont know how to adjust it. i know how to adjust the set screw on top but do i adjust the pressure with the vaccum line on or off and i know it should be set at approx 40lbs. i have also purchased 24lb injectors and a 70mm mass air but i wont have them till the end of april so i just want to get this regulator on with my stock 19lb injectors.
__________________
Thank You! 2003 Cobra Convertible |
![]() |
![]() |
![]() |
#2 |
motors done......woohooo
Join Date: Mar 2002
Posts: 799
|
![]() i know on stock to slightly modified cars the fuel pressure should be at 38-40 without the vaccum line hooked up when you hook up the line it should drop to about 32-35psi, you might need more fuel pressure than that though because of your mods.
|
![]() |
![]() |
![]() |
#3 |
Procharged!
Join Date: May 1999
Location: Hanover, PA
Posts: 1,539
|
![]() I say set it to 38psi vac off like mentioned above, make sure you tighten the 9/16" nut on top after you are done adjusting. Turn it a little then hit the throttle and see where the pressure settles, then lock the nut down. Are you running a FMU?
The adjustable regulator will only give you more fuel at WOT, the stock EEC will adjust the pulse width of the injector to make the A/F ratio what it needs to be, the only way to get more fuel down low is to increase the injector size.
__________________
D/R 10108 NMRA Drag Radial, 25.5 chassis, F1R Check out RNH Performance Performance Engines and Custom Fabrication. From Mild to Wild we can build what you want, when you want it. FOR SALE Stainless Steel Torque Box Supports |
![]() |
![]() |
![]() |
#4 |
Registered Member
Join Date: Oct 1998
Location: Suburban Chicago, Hanover Park
Posts: 695
|
![]() The vaccuum line should be off but you should plug the fitting on the regulator with your finger to get true readings, otherwise it's still sucking air.
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
fuel pressure issues | mustang98gt | Modular Madness | 3 | 07-05-2003 10:43 PM |
walk a blind man to the fuel pressure regulator please! | 1jimmy__d | Windsor Power | 2 | 08-23-2002 08:12 PM |
adjustable fuel pressure regulator | 87 GT MUSTANG | Windsor Power | 9 | 08-15-2002 09:36 PM |
Installing a fuel pressure regulator | moponys | Windsor Power | 7 | 07-20-2001 09:36 PM |
Fuel Pressure Regulator??? | King Snake | Modular Madness | 0 | 03-10-2001 07:51 PM |