master cylinder and prop valve question

shelby2 · 07-01-2002, 01:52 AM

hello, could someone please tell me what kind (year/make) of master cylinder i would need for a 4 wheel power disc brake setup. i have front discs from a 78 granada and rear brakes from a 78 versailles. i was thinking about using the master cylinder and proportioning valve from the 78 versailles, but when i went to the parts store it said the proportioning valve was for abs??? i was looking at master power brakes' website and saw that they have those parts, master cylinder is $120 and the valve is $110, which is more than what i want to pay. i would appreciate it if any of you could at least steer me in the right direction, i thank for your help in advance

Gearhead999 · 07-05-2002, 05:32 PM

I have heard that the master cylinder to run with 4-wheel disk brakes is one from a SVO. They are suppose to bolt in and all you have to change is the lines alittle [different side of cylinder].

I have the stock dual m/cyl on my 68 when I added rear disk.

07-01-2002, 01:52 AM	#1
shelby2 Registered Member Join Date: Nov 1999 Location: O Fallon, IL Posts: 87	master cylinder and prop valve question hello, could someone please tell me what kind (year/make) of master cylinder i would need for a 4 wheel power disc brake setup. i have front discs from a 78 granada and rear brakes from a 78 versailles. i was thinking about using the master cylinder and proportioning valve from the 78 versailles, but when i went to the parts store it said the proportioning valve was for abs??? i was looking at master power brakes' website and saw that they have those parts, master cylinder is $120 and the valve is $110, which is more than what i want to pay. i would appreciate it if any of you could at least steer me in the right direction, i thank for your help in advance __________________ shawn hill 1967 ford mustang coupe, red w/white stripes, hood scoop, front and rear spoiler, 5.0 fuel injection, trickflow intake, 70mm mac tb/egr, billet fpr, 24# inj, 73mm c&l maf, cobra t5 w/pro 5.0 shifter, msd 6a box w/tfi blaster coil, flowtech longtubes w/turbo mufflers, t-rex inline pump, ported and polished E7TE heads w/1.94,1.60 valves, lunati 292 cam, harland sharp 1.6 rollers, ford 9" with 4.10 gears

07-05-2002, 05:32 PM	#2
Gearhead999 Registered Member Join Date: Sep 1998 Location: Oviedo, FL Posts: 992	I have heard that the master cylinder to run with 4-wheel disk brakes is one from a SVO. They are suppose to bolt in and all you have to change is the lines alittle [different side of cylinder]. I have the stock dual m/cyl on my 68 when I added rear disk. __________________ "Support our Troops" Dave 1968 Cougar 2004 Thunderbird 2007 F150 Harley-Davidson, SuperCrew 1986 LTD 1997 Ranger 1992 Honda Civic

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brake Upgrade Confusion	RMARIANI	Windsor Power	1	07-12-2001 09:38 AM