© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-10-2001, 07:11 PM | #1 |
Registered Member
Join Date: Jun 2001
Location: Shawnee, Ok USA
Posts: 24
|
How hard/easy is it to spin Toyo Proxes FZ4's on a '96GT??
I have a set of Toyo 245/45 ZR17's that I can't hardly spin. Is this common on a stock GT. The car runs good and has good pep, but from a light, I can barely spin em. Just bought the car 2 weeks ago.
------------------ Thanks, Keith |
06-11-2001, 11:25 AM | #2 |
Registered Member
Join Date: Jan 2000
Location: Warner Robins, GA, USA
Posts: 210
|
Good traction is a GOOD thing, not a bad thing. Don't worry about not spinning your tires; spinning your tires hurts your ET and wears out your tires! But if you want to spin your tires try changing your rear end gears to 4.10s.
------------------ '97 Cobra, Rio Red, MAC Cold Air Kit, 3.73s, NGK V-Power BBK H-pipe w/cats |
06-11-2001, 12:55 PM | #3 |
Registered Member
Join Date: Jun 2001
Location: College Park, MD, USA
Posts: 2
|
He's right, but if you really want to sping your tires let the RPM's go up to 3000 to 4000 or even higher then let go of the clutch and slame and the gas pedal all the way.
------------------ 99 Black Cobra Convertible / Black Interior Current Mods: *Kenny Brown Modified Koni Adjustable Shocks *Kenny Brown springs and struts (Lowered 1.25 inch) *Kenny Brown Strut Tower Brace *Kenny Brown Lower Chassis Brace |
06-12-2001, 08:15 AM | #4 |
Registered Member
Join Date: Jan 2000
Location: Warner Robins, GA, USA
Posts: 210
|
That ought to do it!!
|
06-12-2001, 11:39 AM | #5 | |
Registered Member
Join Date: Jun 2001
Location: Shawnee, Ok USA
Posts: 24
|
Quote:
Thanks, Keith |
|
06-13-2001, 08:32 AM | #6 |
Registered Member
Join Date: Jan 2000
Location: Warner Robins, GA, USA
Posts: 210
|
In that case lightly hold your brakes and floor it.
|
06-17-2001, 11:45 AM | #7 |
It's a lot like a race car
Join Date: Aug 2000
Location: Meridian, MS
Posts: 4,130
|
That odd, my brothers 96 GT spun like crazy. It was a bit$h to lanch
|
06-18-2001, 10:21 AM | #8 |
Registered Member
Join Date: Jun 2001
Location: Shawnee, Ok USA
Posts: 24
|
On the way home last night, I noticed the car was clattering. When I originally posted, I had a K&N filter installed. At first I thought I got ahold of some bad gas but, I took the K&N off and put the paper filter back on, after that the car barely clatters at all and will spin em nicely.
Thanks ALL for the replies. Keith |
Thread Tools | |
Display Modes | Rate This Thread |
|
|