© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
06-05-2001, 08:51 PM | #1 |
Registered Member
Join Date: Sep 2000
Location: Brampton, ON, Canada
Posts: 298
|
Making the right mods : Need major opinions!
Hi,
Ok, just so you know what I have, and what I want, here goes... I have a stock 1989 5.0L engine with either a mild aftermarket cam, or rockers setup. Along with 3.55 gears, and a Mac cat-back. I want to build it up for more power (enough the drivetrain can haldle without breaking down), little by little, and with my limited budget, here's what I plan on buying for this year: - 73mm C&L MAF (for 19# injectors) ($80) - FMS 65mm TB ($76 so far on eBay) - Explorer Upper/Lower intake (not sure on $) Question is, amd I going in the right order so far? I know I can get difference with the MAF, but the 65mm wouldn't be any good to my stock intake. Although at that price, it's a steal and it can be useful for a bigger intake. What do I do? I can get the MAF cuz its from a private seller; the TB I'd have to wait for the bid to end. Thanks! Bye! ------------------ Gautam N. Lad http://www.cubicdesign.com http://www.cubicdesign.com/mustang/ |
06-05-2001, 10:11 PM | #2 |
Registered Member
Join Date: Oct 1999
Location: Cincinnati, Ohio
Posts: 1,575
|
The intake is a waste of money with out heads, as is the throttle body. The MAF won't due much either. Take all the money there you planed to spend and get a set of used heads like GT-40's or so. My car with a stock intake and GT-40 heads, and a stock cam ran a 12.9. That should be plenty for you.
------------------ 87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,Crane 2031, Edelbrock intake, long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's. Best time 12.96 Best MPH 103.42 Best 60' 1.695 Visit my site at: http://www.geocities.com/cobrar93_2000/MyPage.html |
06-06-2001, 07:02 AM | #3 |
Registered Member
Join Date: Sep 2000
Location: Brampton, ON, Canada
Posts: 298
|
Hi,
Well, I am definately getting the C&L since $87 (including shipping) is a really good deal. I don't expect to get a world of difference, but if I can build up slowly, I'm sure I will reach my goal eventually. BTW, Here's how I plan on making my mods: - C&L 73mm - Explorer upper/lower intake - 65mm TB (only with intake above) - Heads - Ignition - Fuel system (pump/injectors) - Suspension and anything else Thanks! Bye! ------------------ Gautam N. Lad http://www.cubicdesign.com http://www.cubicdesign.com/mustang/ |
06-06-2001, 06:06 PM | #4 |
Undescribable
Join Date: Sep 1998
Location: Ft Myers Fla
Posts: 1,539
|
gautam: I am in same situation as you are, i want to make some mods and while it seems easier to do the smaller and least expensive mods first they won't make much difference till you put a good set of heads on it. Thats the first thing i am gonna do is heads and at same time intake then those other mods will be of use.
------------------ 93-LX: 5 Speed, Flow's with H-Pipe, 3.73's Sub's and K&N. |
06-06-2001, 06:10 PM | #5 |
Sniffed too much n20
Join Date: Oct 1998
Location: Ont, Canada
Posts: 1,018
|
Grab that meter!! That's a steal compared to what I got mine from, and I got a discount on it from RCO at the time.
That Explorer intake isn't smog legal is it? Cuz the drive clean program may not like it too well. Go for a cobra then... Consider heads and cam along with it if you can afford to. |
06-06-2001, 06:18 PM | #6 |
Registered Member
Join Date: Sep 2000
Location: Brampton, ON, Canada
Posts: 298
|
Hi,
Yes, the Explorer intake can be illegal for smog regions, but there's a way to modify it so it will be emission friendly. Plus, I figure the Explorers (and their intakes) running around in Ontario are at least equipped with the smog control features. Well, the meter is gonna be mine soon. Now I gotta start searchin for the intakes (and then the TB and heads). Thanks! Bye! ------------------ Gautam N. Lad http://www.cubicdesign.com http://www.cubicdesign.com/mustang/ |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What will these mods do? | esandes | Modular Madness | 4 | 11-14-2002 12:10 AM |
Brake mods ( and other first mods) for a 98 Vert | Chevyguy | Modular Madness | 11 | 09-19-2002 10:03 AM |
Future Mods | Strider | Modular Madness | 6 | 12-19-2001 01:39 AM |
Making a fast Street Car = More mods? | MrClean | Windsor Power | 15 | 09-11-2001 04:40 PM |
Mods 4 01 GT... Pros & Cons | Grey-GT-01 | Modular Madness | 11 | 08-20-2001 02:26 PM |