Home made Cold-Air kit Works.

Mercury · 04-02-2001, 12:42 AM

Hello everyone.

Not sure if anyone remembers me or not, but I used to post alot here up until 3 or so months ago.

My friend Tim C with a 99 35th Aniv GT read about a homemade cold air kit. Last week, he went to Lowes and Home Depot and bought PVC pipe and some 3 inch rubber elbows and rigged up his own Cold Air kit. It looks good and it actually works, giving a noticable kick from 3800 RPM and above. I plan on doing the same to my 2000 GT soon. Just wanted to inform everyone, incase anyone doubted or was afraid to make there own. 35 dollars sure as hell beats 200 and some dollars for a aftermarket Cold-Air.

Well post some times and numbers as soon as we get them, but you can feel a diffrence. Oh and after doing this home made mod, disconnect the battery or pull fuse (If I remember correctly) 21 wait a few minutes and reconnect for best results.

------------------
64 1/2 Red Mustang Coupe. 289, C4, 3:1 rear gear. Mallory duel point. Ported & Polished 65 heads shaved .01 with 351 windsor valves, high side of 10.5:1 comp, 1.7:1 sled rockers, blue wolverine lumpy cam, autolite 4100 Hipo 4 barrel. And to many others to list

2000 Perf Red Mustang GT. 5spd.

64 1/2 red 6cyl coupe. Auto. project car.

Mustang92 · 04-02-2001, 07:18 AM

You need to make the change at the track and see if there is a difference. I made my own cold air a while back and although it felt good on the street at the track it lost .10-.20.

------------------
00 GT, MAC Offroad H, Steeda Pulleys, Steeda Timing Adjuster, FMS 4.10’s, Flows w/turndowns, UPR shifter, UPR subframes, UPR adj LCA’s (not installed), Air Filter, Lakewood 70/30 & 50/50, Weld Pro Stars, Nitto DR’s, 253.8 RWHP/292.8RWTQ
Best on DR's 13.09@103.92 (1.81 60ft)
Best on ET Drags 12.91@101.93 (1.74 60ft)
M/M 100
88 LX coupe X-FHP, 12pt Cage, UPR K-member, 31 spline rear, full spool (For Sale)

04-02-2001, 12:42 AM	#1
Mercury The Redneck James Bond Join Date: Sep 2000 Location: Fayetteville NC Posts: 1,707	Home made Cold-Air kit Works. Hello everyone. Not sure if anyone remembers me or not, but I used to post alot here up until 3 or so months ago. My friend Tim C with a 99 35th Aniv GT read about a homemade cold air kit. Last week, he went to Lowes and Home Depot and bought PVC pipe and some 3 inch rubber elbows and rigged up his own Cold Air kit. It looks good and it actually works, giving a noticable kick from 3800 RPM and above. I plan on doing the same to my 2000 GT soon. Just wanted to inform everyone, incase anyone doubted or was afraid to make there own. 35 dollars sure as hell beats 200 and some dollars for a aftermarket Cold-Air. Well post some times and numbers as soon as we get them, but you can feel a diffrence. Oh and after doing this home made mod, disconnect the battery or pull fuse (If I remember correctly) 21 wait a few minutes and reconnect for best results. ------------------ 64 1/2 Red Mustang Coupe. 289, C4, 3:1 rear gear. Mallory duel point. Ported & Polished 65 heads shaved .01 with 351 windsor valves, high side of 10.5:1 comp, 1.7:1 sled rockers, blue wolverine lumpy cam, autolite 4100 Hipo 4 barrel. And to many others to list 2000 Perf Red Mustang GT. 5spd. 64 1/2 red 6cyl coupe. Auto. project car.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what makes it run differnet when cold?	66StangGuy	Classic Mustangs	10	06-02-2003 02:11 PM
Cold + Torque = Wheel Hop	Rice Hunter	Stang Stories	5	12-05-2002 01:18 AM
Cold Air Intake	trippinbillies40	Small Ponies	0	07-19-2001 03:47 PM
Cold cold air induction!!!!!!	01 BLACK GT	Modular Madness	3	07-18-2001 02:10 PM

04-02-2001, 07:18 AM	#2
Mustang92 Drag Racer! Join Date: Nov 1999 Location: Lake Worth, FL USA Posts: 757	You need to make the change at the track and see if there is a difference. I made my own cold air a while back and although it felt good on the street at the track it lost .10-.20. ------------------ 00 GT, MAC Offroad H, Steeda Pulleys, Steeda Timing Adjuster, FMS 4.10’s, Flows w/turndowns, UPR shifter, UPR subframes, UPR adj LCA’s (not installed), Air Filter, Lakewood 70/30 & 50/50, Weld Pro Stars, Nitto DR’s, 253.8 RWHP/292.8RWTQ Best on DR's 13.09@103.92 (1.81 60ft) Best on ET Drags 12.91@101.93 (1.74 60ft) M/M 100 88 LX coupe X-FHP, 12pt Cage, UPR K-member, 31 spline rear, full spool (For Sale)