Headlight Adjustment?

Rosco · 06-11-2003, 01:17 PM

OK, just installed my new headlights from 50Resto.com. They are made by KSR. Question is...after installing the lights, the outer markers sit flush with the centers. But the inners aren't flush with the centers. The centers on the inners sides are actually sit further in then the inners. I was wondering what kind of adjustment i have to make to align them? I've tried just loostening the nuts and making it flush that way, but then they shift around alot. Maybe spacers or something?

Oh yeah, this is what the new ones look like in comparison to the old. Old = left , New = Right. Don't mind the fogs, those are being replaced very soon.

TMASTER · 06-11-2003, 03:21 PM

I used washers on mine to get them alighned correctly

make sure there not to tight, or not too loose, you dont want washer noise! lol

06-11-2003, 01:17 PM	#1
Rosco Registered Member Join Date: Mar 2002 Location: Vestal, NY Posts: 307	Headlight Adjustment? OK, just installed my new headlights from 50Resto.com. They are made by KSR. Question is...after installing the lights, the outer markers sit flush with the centers. But the inners aren't flush with the centers. The centers on the inners sides are actually sit further in then the inners. I was wondering what kind of adjustment i have to make to align them? I've tried just loostening the nuts and making it flush that way, but then they shift around alot. Maybe spacers or something? Oh yeah, this is what the new ones look like in comparison to the old. Old = left , New = Right. Don't mind the fogs, those are being replaced very soon. __________________ 1989 Mustang 5.0 Conversion, Full Saleen ground effects and spoiler, '94 saleen decal set, '93 Saleen Seats, Black interior from a '93, Steeda quadrant, smog pump delete, a/c delete, Steeda Tri-Ax shifter, '97 rear differential, aluminum driveshaft, 5 lug conversion, '97 rear disc brakes, southside upper and lower control arms, '99 GT Anniversary wheels, flowtech longtubes, flowtech offroad H-pipe, saleen lowering springs, kyb shocks, caster/camber plates

06-11-2003, 03:21 PM	#2
TMASTER Registered Member Join Date: Sep 2002 Location: TEXAS Posts: 161	washers? I used washers on mine to get them alighned correctly make sure there not to tight, or not too loose, you dont want washer noise! lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Headlight Switch Replacement 1995	GSRuehl	Windsor Power	0	04-22-2004 09:34 PM
headlight mounting	Spyder1914	Small Ponies	1	11-27-2003 09:02 PM
Headlight Adjustment	Nixon1	Windsor Power	5	08-04-2003 11:25 AM
Power loss due to bad RR adjustment?	gt93mustang	Windsor Power	0	03-19-2001 01:17 PM
help on headlight stuff!	SHaFT7	Windsor Power	2	02-02-2001 01:20 AM