Mods for the Bullitt

'01 Bullitt · 06-30-2001, 12:01 PM

Looking to maybe add some mods to my Bullitt. I don't really wanna go expensive right now, looking to spend maybe about $1000 at this time. What way should I go to get the most horsepower? Thanks for your replies.

------------------

Just a stock 2001 Bullitt

bullitt713 · 06-30-2001, 03:55 PM

Quote:

Originally posted by '01 Bullitt:
Looking to maybe add some mods to my Bullitt. I don't really wanna go expensive right now, looking to spend maybe about $1000 at this time. What way should I go to get the most horsepower? Thanks for your replies.

You may want to consider keeping it stock...it'll be worth a lot more in the future. I have 0713....and it seems pretty fast already. good luck

'01 Bullitt · 06-30-2001, 04:12 PM

Just out of curiosity, where can you find what number your Bullitt is?

------------------

Just a stock 2001 Bullitt

Skyman · 07-01-2001, 01:38 AM

You could get exhaust, pulleys, H pipe, gears.

Skyler

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.55@107 Motor

lethrneck32 · 07-03-2001, 10:45 AM

I think the bullit allready comes with underdrive pullies, so I wouldnt start there. Also, I think the catback is allready better than on a gt, so this is what I would start with.

1. offroad H or X. I have the Mac offroad H, it's cheap ($109), but if I had to do it again i would without question go with a Dr. Gas offroad X, It is a little pricey ($295), but well worth it in my opinion. The Dr Gas has to be welded to fit, and I know a place in Fort Worth that will do it pretty cheap, most places wont touch it because it dosent have cat's.

2. C&L 80mm Max Flow kit ($245). I picked up 9rwhp/10rwtq with this alone ( only got 11rwhp/15rwtq from the H and pullies combined).

3. Gears, 3.73's or 4.10's. My pick would be 4.10's.

4. Drag radials

my .02

------------------
00GT
255RWHP
302RWTQ
Mac offroad H, C&L 80mm MAF, March pullies
8.9 @ 78mph 2.1 60' stock tires/Hot Texas weather

Mustang92 · 07-03-2001, 11:06 AM

The Bullitts do not come with underdrive pullies so add that to your list.

------------------
00 GT, MAC Offroad H, Steeda Pulleys & Timing Adjuster, 4.10’s, Flows w/turndowns, UPR shifter, UPR Pro Series LCA’s, Lakewood 70/30’s & 50/50’s, 253.8 RWHP/292.8RWTQ
12.91@101.93 (1.74 60ft)
M/M 100, 7085
2001 Mod Motor Shootout 2V NA Champion
Recent Pic from Moroso

06-30-2001, 12:01 PM	#1
'01 Bullitt Registered Member Join Date: Jun 2001 Location: Dallas, TX, USA Posts: 3	Mods for the Bullitt Looking to maybe add some mods to my Bullitt. I don't really wanna go expensive right now, looking to spend maybe about $1000 at this time. What way should I go to get the most horsepower? Thanks for your replies. ------------------ Just a stock 2001 Bullitt

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EZRIDN Vs. '01 Bullitt	EZRIDN	Stang Stories	6	10-24-2002 11:25 PM
new bullitt owner looking for mod info.	woody	Special Production	1	10-03-2001 01:26 AM
Bullitt...all show and no go!!	MS54	Modular Madness	4	09-06-2001 12:45 PM
Mustang Bullitt -- What's the big deal? (warning: a rant)	Red514LX	Blue Oval Lounge	24	05-03-2001 02:55 PM
Bullitt Mustang unveiled at LA Auto Show	Blue Speed	Blue Oval Lounge	1	01-07-2001 11:56 PM

06-30-2001, 04:12 PM	#3
'01 Bullitt Registered Member Join Date: Jun 2001 Location: Dallas, TX, USA Posts: 3	Just out of curiosity, where can you find what number your Bullitt is? ------------------ Just a stock 2001 Bullitt

07-01-2001, 01:38 AM	#4
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	You could get exhaust, pulleys, H pipe, gears. Skyler ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.55@107 Motor

07-03-2001, 10:45 AM	#5
lethrneck32 Registered Member Join Date: Jul 2001 Location: Fort Worth, Tx. Posts: 4	I think the bullit allready comes with underdrive pullies, so I wouldnt start there. Also, I think the catback is allready better than on a gt, so this is what I would start with. 1. offroad H or X. I have the Mac offroad H, it's cheap ($109), but if I had to do it again i would without question go with a Dr. Gas offroad X, It is a little pricey ($295), but well worth it in my opinion. The Dr Gas has to be welded to fit, and I know a place in Fort Worth that will do it pretty cheap, most places wont touch it because it dosent have cat's. 2. C&L 80mm Max Flow kit ($245). I picked up 9rwhp/10rwtq with this alone ( only got 11rwhp/15rwtq from the H and pullies combined). 3. Gears, 3.73's or 4.10's. My pick would be 4.10's. 4. Drag radials my .02 ------------------ 00GT 255RWHP 302RWTQ Mac offroad H, C&L 80mm MAF, March pullies 8.9 @ 78mph 2.1 60' stock tires/Hot Texas weather

07-03-2001, 11:06 AM	#6
Mustang92 Drag Racer! Join Date: Nov 1999 Location: Lake Worth, FL USA Posts: 757	The Bullitts do not come with underdrive pullies so add that to your list. ------------------ 00 GT, MAC Offroad H, Steeda Pulleys & Timing Adjuster, 4.10’s, Flows w/turndowns, UPR shifter, UPR Pro Series LCA’s, Lakewood 70/30’s & 50/50’s, 253.8 RWHP/292.8RWTQ 12.91@101.93 (1.74 60ft) M/M 100, 7085 2001 Mod Motor Shootout 2V NA Champion Recent Pic from Moroso