Trick Flow Specialties good guys!

8850 · 03-24-2001, 09:12 AM

I have had my Twisted Wedge heads for at least 5 years. My Mustang is a trailer car and I don't have many miles but 5 years is a long time too. Several of my valve guides wore out. I know there was a problem with guides in these heads way back when but at the time I had no problem so I kept on running. I recently took my heads off and noticed several of the valves too loose to go back together. I call Trick Flow and talked to Charlie. Although my heads are this old he still sent me all new guides and even stem seals at no charge. I believe this says well of Trick Flow. Many thanks!

------------------
88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg

[This message has been edited by 8850 (edited 03-24-2001).]

302 LX Eric · 03-24-2001, 11:33 AM

Good to hear!

I've had my TFS TW heads now for about 3 years (I think after the valve guide fix) with no problems whatsoever. Anyways, I had to call them up about a couple questions and to get the screws for the EGR stuff in the back of the heads and they were very helpful and knew their product very well - which is sometimes hard to come by these days.

Take care, E

------------------
1991 5.0 LX Coupe - 38,000 miles

13.17 @ 106.14 mph w/ 2.138 60'

03-24-2001, 09:12 AM	#1
8850 Registered Member Join Date: Nov 1998 Location: Sugarland, TX USA Posts: 161	Trick Flow Specialties good guys! I have had my Twisted Wedge heads for at least 5 years. My Mustang is a trailer car and I don't have many miles but 5 years is a long time too. Several of my valve guides wore out. I know there was a problem with guides in these heads way back when but at the time I had no problem so I kept on running. I recently took my heads off and noticed several of the valves too loose to go back together. I call Trick Flow and talked to Charlie. Although my heads are this old he still sent me all new guides and even stem seals at no charge. I believe this says well of Trick Flow. Many thanks! ------------------ 88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg [This message has been edited by 8850 (edited 03-24-2001).]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HEY GUYS I THINK I HAVE A GOOD IDEA	dirtyGT	Blue Oval Lounge	3	04-06-2001 09:36 PM
Trick Flow Stage 1 cam - Which rockers?	2FastLX	Windsor Power	3	03-18-2001 02:22 AM
Trick Flow TW or AFR 165's??	2FastLX	Windsor Power	21	02-28-2001 12:45 PM
Cobra or Trick Flow intake with GT40P heads?	Shotgun28	Windsor Power	16	01-24-2001 04:15 PM
Trick Flow "Street" Intake	BowTie Eater 5 Liter	Windsor Power	7	01-12-2001 11:04 AM

03-24-2001, 11:33 AM	#2
302 LX Eric or '331 LX Eric' Join Date: Jan 1999 Location: Columbus, Ohio Posts: 2,142	Good to hear! I've had my TFS TW heads now for about 3 years (I think after the valve guide fix) with no problems whatsoever. Anyways, I had to call them up about a couple questions and to get the screws for the EGR stuff in the back of the heads and they were very helpful and knew their product very well - which is sometimes hard to come by these days. Take care, E ------------------ 1991 5.0 LX Coupe - 38,000 miles 13.17 @ 106.14 mph w/ 2.138 60'