MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Modular Madness
Register FAQ Members List Calendar Mark Forums Read

Notices


Reply
 
Thread Tools Rating: Thread Rating: 58 votes, 4.36 average. Display Modes
Old 09-20-2002, 02:17 PM   #1
stangman96
Ford Dealer Mechanic
 
Join Date: Feb 2002
Location: San Antonio Teaxs
Posts: 31
Talking It Was Waaaaaaaaaay Cool

MAN IT WAS WAY COOL, DROVE A '03 COBRA VERT TODAY THAT WAS IN THE SHOP, ME AND ANOTHER TECH TOOK IT OUT AND DROVE IT, DROVE HER HARD, 6 SPEED TRANNY, WE HIT 140 MPH REAL QUICK, TALK ABOUT POWER. NOT THAT WE DO IT HERE ALL THE TIME, BUT I JUST HAD TO RUN IT, IT WAS CALLING MY NAME... THE POWER IT HAS IN UNREAL, YOU JUST NEED TO GET OUT AND TEST DRIVE ONE TODAY, BY THE WAY, THE CUSTOMER'S COMPLAINT WAS LACK OF POWER AND POOR GAS MILEAGE, WHAT A CROCK... NEEDLESS TO SAY, IT IS OWNED BY A FEMALE, SHE EVEN SAID IT WAS DYNOED AT A SHOP AND THEY TOLD HER THAT THE CONVERTORS WERE TOO HOT AND THE FUEL TRIM WAS WAY OFF. I HOOKED IT UP TO THE COMPUTER, FUEL TRIM WAS NORMAL, CAT TEMP WAS OK, NO CODES, AND IT RAN GREAT. GO FIGURE.. OH YEAH, SHE EVEN TOLD THE SERVICE WRITER TO MAKE SURE THAT NO "PUNK" DRIVES HER CAR, WELL SINCE I AM THE MUSTANG SPECIALIST HERE AT THE DEALER, I GUESS I AM "THE PUNK", ALL THE MORE TO DRIVE HER '03 COBRA VERT AND SEE WHAT ITS GOT.. HEHE HOPE SHE DIDNT HAVE A HIDDEN CAMERA IN THAT CAR...... GET THIS, HER PLATES SAY "**** **"
__________________
96 GT 5 speed, bassani x pipe, mac catback, k&n air filter, motorsport wires, 3.73 motorsport gears (love em), 2000 PI heads, intake combo, speedo calibrator...

Last edited by Hammer; 09-26-2002 at 09:33 PM..
stangman96 is offline   Reply With Quote
Old 09-20-2002, 02:21 PM   #2
Hammer
AKA "Dr. Evil"
 
Hammer's Avatar
 
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
Default

Stangman,
I realize you're stoked after your ride...

BUT YOU DON"T HAVE TO SHOUT!
__________________
Uncle Sam
"What the hell is up with all the gauges?
Calling Captain Kirk, your ride awaits... Phasers on stun...."
Hammer is offline   Reply With Quote
Old 09-20-2002, 02:39 PM   #3
stangman96
Ford Dealer Mechanic
 
Join Date: Feb 2002
Location: San Antonio Teaxs
Posts: 31
Default my bad hammer

Quote:
I realise you're stoked after your ride...

BUT YOU DON"T HAVE TO SHOUT!
but but but........... i had to show my enthusiam!!!! lmao...
you had to have been there!!! come visit me here, we can test all the svt vehicles..
__________________
96 GT 5 speed, bassani x pipe, mac catback, k&n air filter, motorsport wires, 3.73 motorsport gears (love em), 2000 PI heads, intake combo, speedo calibrator...
stangman96 is offline   Reply With Quote
Old 09-20-2002, 02:47 PM   #4
Hammer
AKA "Dr. Evil"
 
Hammer's Avatar
 
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
Default

Quote:
come visit me here, we can test all the svt vehicles..
I don't know if that would be a very good idea....

Customers would be complaining about tires coming back bald after the car was serviced...
__________________
Uncle Sam
"What the hell is up with all the gauges?
Calling Captain Kirk, your ride awaits... Phasers on stun...."
Hammer is offline   Reply With Quote
Old 09-20-2002, 02:52 PM   #5
GaryDawg
Registered Member
 
GaryDawg's Avatar
 
Join Date: Aug 1999
Location: Las Vegas, NV
Posts: 202
Default

That is a mustang owner's nightmare...

To leave your car in the care of a service department only to have some joker take it out and abuse it...

It's not your car...

Oh, and BTW....

turn off your caps lock...
GaryDawg is offline   Reply With Quote
Old 09-20-2002, 02:59 PM   #6
stangman96
Ford Dealer Mechanic
 
Join Date: Feb 2002
Location: San Antonio Teaxs
Posts: 31
Default

Quote:
Originally posted by Hammer
I don't know if that would be a very good idea....

Customers would be complaining about tires coming back bald after the car was serviced...


what bald tires, i dont know what you are talkin bout willis
__________________
96 GT 5 speed, bassani x pipe, mac catback, k&n air filter, motorsport wires, 3.73 motorsport gears (love em), 2000 PI heads, intake combo, speedo calibrator...
stangman96 is offline   Reply With Quote
Old 09-20-2002, 03:10 PM   #7
The Deuce
Registered Member
 
The Deuce's Avatar
 
Join Date: Apr 2002
Location: Atlanta, GA
Posts: 2,325
Default

Quote:
DROVE A '03 COBRA VERT TODAY THAT WAS IN THE SHOP, ME AND ANOTHER TECH TOOK IT OUT AND DROVE IT, DROVE HER HARD, 6 SPEED TRANNY, WE HIT 140 MPH REAL QUICK, TALK ABOUT POWER
Remind me not to take a car to your shop.

While I understand that you were theoretically, "diagnosing" the problem, it seems a little overboard. Glad you had fun though.
__________________
1997 Mustang GT "The Freak" - 13.80 @ 101.70, 2.07 60'
1995 Honda VFR750 - not much @ really fast (actual data pending.)
1964.5 Mustang 289

Rice Haters Club Member #13
The Deuce is offline   Reply With Quote
Old 09-20-2002, 03:14 PM   #8
stangman96
Ford Dealer Mechanic
 
Join Date: Feb 2002
Location: San Antonio Teaxs
Posts: 31
Default

[QUOTE]Originally posted by The Deuce
[B]Remind me not to take a car to your shop.

it was just a 1rst time kinda ride thing ya know, i had to do it. i drive my 96 and wanted to test the power... besides, if i broke it, i'd have to fix it anyway, and most likely get paid to do it too.. hehe, but all in all, i am 99% good to all cars..
__________________
96 GT 5 speed, bassani x pipe, mac catback, k&n air filter, motorsport wires, 3.73 motorsport gears (love em), 2000 PI heads, intake combo, speedo calibrator...
stangman96 is offline   Reply With Quote
Old 09-20-2002, 03:41 PM   #9
jj_jonathon
Trisket
 
jj_jonathon's Avatar
 
Join Date: May 2002
Location: University of Florida, FL Posts: ½
Posts: 1,560
Default

now i know what they do to my GT when the service it....considering its the nicest stang theyve ever sold at that dealer....

man id be pissed if i ever found out someone did that to my brand new cobra.......im torn between cool and not cool zeus...hrmm...but if i was in your position...ergg...talk about a choice....i certainly wouldnt have taken it to 140 ....wow....
__________________
University of Florida - Physics Major

My 02GT vert
Media Center Pics
BBK Underdrive Pulleys | K&N FIPK (Gen II) | Bullet Grille | Mach 1 Chin Spoiler | UPR Interior Parts | XM Radio | Audiobahn Subs

Ricer Hater's Club Member #1/2 (30) http://www.ricehatersclub.com/
jj_jonathon is offline   Reply With Quote
Old 09-20-2002, 05:01 PM   #10
98SteedaGT
Registered Member
 
98SteedaGT's Avatar
 
Join Date: Jan 2002
Location: Texas
Posts: 330
Default

Hopefully her or her husband, or friends don't read this board.... Would be a shame if they found out and called the dealer up with written proof...... I know I would try to file a formal complaint and get all I could from a dealer that did something like that to my car.....
__________________
// 1998 GT-Steeda Conversion \\ -- Sold

// Now own 2001 F-150 SuperCrew 5.4L \\
98SteedaGT is offline   Reply With Quote
Old 09-20-2002, 05:59 PM   #11
Hammer
AKA "Dr. Evil"
 
Hammer's Avatar
 
Join Date: Feb 1999
Location: South Fork Ranch
Posts: 1,721
Default

Quote:
Hopefully her or her husband, or friends don't read this board.... Would be a shame if they found out and called the dealer up with written proof...... I know I would try to file a formal complaint and get all I could from a dealer that did something like that to my car.....
Well, stangman....
Looks like you might want to consider the other side of things before you joyride....
Although I must admit its REALLY tempting, I can see where I'd be pissed if a mechanic did that with the yellow beastie...

(That's why if I'm not working on it, I take it to someone I trust. And even THEN I'm right there with them when they're doing the work.)
__________________
Uncle Sam
"What the hell is up with all the gauges?
Calling Captain Kirk, your ride awaits... Phasers on stun...."
Hammer is offline   Reply With Quote
Old 09-20-2002, 10:41 PM   #12
Badass_yellowGT
Registered Member
 
Badass_yellowGT's Avatar
 
Join Date: Jun 2002
Location: Western,MA
Posts: 254
Default

i have to say though don`t blame the tech for frying tires anybody who brings there car to the dealer for repairs instead of doing them repairs themself deserves what they get please don`t flame just my opinion
__________________
Rice Haters Club Member #55
For My car Specs Click the Home page link
http://www.badassyellowgt.50g.com/
Badass_yellowGT is offline   Reply With Quote
Old 09-21-2002, 01:14 AM   #13
Titan
Registered Member
 
Titan's Avatar
 
Join Date: Jul 2002
Location: Atlanta
Posts: 296
Default

I agree...take it for a ride...if you're fixing it, it needs to be "fixed"...go stangman...next time, stop by Ga-Tech and pick me up
__________________
Current Sophomore -- Mechanical Engineering

Black on Black 98' GT 5-Speed
Mods = Stuff
Titan is offline   Reply With Quote
Old 09-21-2002, 07:23 AM   #14
Red Mustang Gt 46
13.3 @ 103
 
Red Mustang Gt 46's Avatar
 
Join Date: May 2001
Location: Maryland
Posts: 253
Default

That car will probably see harder times anyhow...
I caught a tech doing the same thing on my 79 Z28 (modified 406 s/b of course). While I was'nt really enthused by the moment , I was amused at seeing and hearing my car scream with the rear end sliding all around....especially when the guy came back to the shop and seeing that ear to ear smile...it was'nt so bad after that.
__________________
Equipment by:
Steeda
C&L
COMP CAMS
FRPP
MSD
Bassani
Magnaflow
MAC
Red Mustang Gt 46 is offline   Reply With Quote
Old 09-23-2002, 12:00 PM   #15
stangman96
Ford Dealer Mechanic
 
Join Date: Feb 2002
Location: San Antonio Teaxs
Posts: 31
Default

ok ok ok, i guess i didnt think of that, you know, customer being a member, doubtful, but possible... well, be it as it may, i will cross that bridge when i get there... however, there are the few customers that bring in their cars and have you do loads of work and diagnosing, just for them to decline the repairs... so it works out in the end, they make me loose money, i drive their car hard!!
__________________
96 GT 5 speed, bassani x pipe, mac catback, k&n air filter, motorsport wires, 3.73 motorsport gears (love em), 2000 PI heads, intake combo, speedo calibrator...
stangman96 is offline   Reply With Quote
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
How to be cool? cyberstang5.0 Windsor Power 18 10-16-2002 06:27 AM
Pretty cool video Coupe Devil Blue Oval Lounge 2 02-27-2002 05:31 PM
Another cool site Coupe Devil Blue Oval Lounge 0 02-27-2002 12:50 PM
Keeping the mustang COOL stanglx347 Windsor Power 4 07-09-2001 10:24 PM


All times are GMT -5. The time now is 12:12 AM.


SEARCH