Need Gt40 heads

wet9500 · 11-02-2003, 11:00 PM

I'm looking for a used set of gt40 heads please post if you have any available or msg me.

Thanks,
William

88workcar · 11-03-2003, 07:07 AM

I have one good one. It is ported, a GOOD port job. I was going to put it on E bay.

Coupe50h · 11-04-2003, 04:41 PM

mine came off an explorer, and they are non p's, you might check into that, they are the same as the gt-40 on the cobras, but they will have slightly less compression unless you mill them to your liking, mine are about 63 cc with some light milling like .1000 or some crap. good luck.

oh yea, dont use the springs if you want to go fast, buy some aftermarket ones.

Scrapla · 11-04-2003, 06:56 PM

I have a pair of new gt40p heads with 1.6 rr's all new email and make me an offer

11-02-2003, 11:00 PM	#1
wet9500 Registered Member Join Date: Nov 2003 Posts: 5	Need Gt40 heads I'm looking for a used set of gt40 heads please post if you have any available or msg me. Thanks, William

11-03-2003, 07:07 AM	#2
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	I have one good one. It is ported, a GOOD port job. I was going to put it on E bay. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

11-04-2003, 04:41 PM	#3
Coupe50h Registered Member Join Date: Aug 2002 Location: SanAntonio, Tx Posts: 957	mine came off an explorer, and they are non p's, you might check into that, they are the same as the gt-40 on the cobras, but they will have slightly less compression unless you mill them to your liking, mine are about 63 cc with some light milling like .1000 or some crap. good luck. oh yea, dont use the springs if you want to go fast, buy some aftermarket ones. __________________ X-Texas highway patrol ssp 1990 coupe - exploder Gt-40 iron heads, Explorer intake, 19 lber's. E-cam. crane 1.7 rollers. 190fp. 75mm maf. 65mm tb, tubular subframe connectors, mac cai, Asp crank pulley, T-5, king cobra clutch, flowtech 1-5/8 unequals, mac X-pipe Frpp driveshaft, lakewood Lca's. race weight 3,160 12.69 @ 107.35, 1.71 60' 26x8.5 drag's 3.90 gear 13.20 @ 106.91 - 235/60/15 firestones 2.3 60' 3.27 gear

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Price estimate for barely used Edel. Perf. RPM alum. heads w/ 2.02/1.60 valves??	Simi Stang	Windsor Power	13	11-03-2003 11:23 PM
GT40 Iron heads?	srv1	Windsor Power	8	04-02-2002 08:29 AM
What kind of Windsor heads?	vetteeatr	Windsor Power	11	10-28-2001 03:43 AM
For whoever it was considering using stock ported heads	2FastLX	Windsor Power	5	10-11-2001 01:53 PM
anyone running GT40 heads on a GT please help	redsn95vert	Windsor Power	8	03-19-2001 07:37 PM