Rear window problems

bmxmon · 05-05-2004, 10:10 PM

I am having problems with my rear window in my 65. I put new plastic roller things in there, but the metal thing that goes into it keeps popping out. Sometimes, it will roll up and down a couple times, but then it will pop out. This makes the window fall down by its self. Hopefully you can figure out what Im talking about, because i dont really know the "real" names for this stuff. thanks for any help.

Kisner · 05-06-2004, 11:39 AM

The part you're talking about is the "quarter window frame to channel roller." The kits sold usually include the nylon window roller and pin. If memory serves me correctly there's 3 on each window frame and 2 more on the window regulator. However, the 2 nylon rollers on the regulator are held on with cotter-pin type clips. I've replaced the cotter-pin types but never have the rivet-type pin ones. So hopefully someone else knows how to properly mount the pin into the window frame.

05-05-2004, 10:10 PM	#1
bmxmon Registered Member Join Date: Mar 2004 Location: Minnesota Posts: 950	Rear window problems I am having problems with my rear window in my 65. I put new plastic roller things in there, but the metal thing that goes into it keeps popping out. Sometimes, it will roll up and down a couple times, but then it will pop out. This makes the window fall down by its self. Hopefully you can figure out what Im talking about, because i dont really know the "real" names for this stuff. thanks for any help.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
power window problems	CrimsonRacing	Windsor Power	2	06-11-2003 05:00 PM
window wont go up all the way!	GhettoPop	Windsor Power	1	05-16-2003 06:14 AM
Leaky Rear Window	Scrapla	Appearance & Detailing	0	04-27-2003 12:12 PM
Replacement rear window molding! ($99)	1BAD89	Blue Oval Lounge	3	11-26-2001 09:07 PM
Recall 01S15 Rear Knuckle replacement	folthoff	Special Production	0	05-02-2001 08:28 AM

05-06-2004, 11:39 AM	#2
Kisner Registered Member Join Date: Nov 2000 Posts: 290	The part you're talking about is the "quarter window frame to channel roller." The kits sold usually include the nylon window roller and pin. If memory serves me correctly there's 3 on each window frame and 2 more on the window regulator. However, the 2 nylon rollers on the regulator are held on with cotter-pin type clips. I've replaced the cotter-pin types but never have the rivet-type pin ones. So hopefully someone else knows how to properly mount the pin into the window frame.