© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
10-05-2004, 09:36 PM | #1 |
Registered Member
Join Date: Oct 2001
Location: balto., Md United States
Posts: 32
|
Line Lock ?
I bought the B&M line lock kit. I have a 91 gt.
In the instructions there are several diagrams showing different brake styles, well all of the diagrams show that there are 2 lines coming out of the master cylinder, however my car has 3 lines coming out of the master cylinder . Has anyone ever hooked up a line lock kit with this type of set up? |
10-06-2004, 01:10 AM | #2 |
Registered Member
Join Date: May 2000
Location: Ontario,Canada
Posts: 233
|
Yep have the same setup as you want.
Have 3 on the master cyclinder. Take the bottom line off the master plug that hole, you'll use that line after (goes to driver front tire). 2 Lines on the side of master run to the proportioning valve. Rear line out the bottom of prop. valve goes to rear brakes, just leave that alone. Front line out of prop valve take it out (run to pass. front brake). Make a line that goes from that port into the IN on the B&M Solenoid. From the OUT port on the solenoid make a line and run it to a "T" or "Y" fitting. Then connect the 2 lines you disconnected from the master and prop valve into each side of "T" or "Y" fitting and you're done. You'll need to make an adapter to go from the front driver line into the "T" or "Y" fitting since its a different connector. Or just cut it and flare a new fitting, easier said then done with everything still in the engine bay. Oh and pick up the Hurst Install kit, will save ya time trying to find fittings and hose. I do have a drawing if you need it, just give me your e-mail and I'll send it ASAP.
__________________
1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH |
10-07-2004, 07:16 PM | #3 |
Registered Member
Join Date: Nov 1999
Location: Altoona, PA
Posts: 336
|
That's how we did ours on my dad's 91GT.
__________________
-Paul Dec '04 5.0 Mustang and Super Fords Magazine Featured Car 1995 NA GT CONVERTIBLE BEST PASS TO DATE: 12.19 at 112.51 AFR's, FTI cam, edelbrock intake, EEC TUNER and all the bolt ons on the stock shortblock. http://www.angelfire.com/pa2/killercanary |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Line Lock ?'s | GhOsT6_9 | Windsor Power | 1 | 03-19-2004 03:26 AM |
line lock hook up?? | pedley | Windsor Power | 2 | 10-06-2003 12:22 PM |
Line Lock Help | RoadWarrior | Windsor Power | 7 | 09-16-2002 06:34 AM |
Line lock question-which line goes to front brakes | Stang_ROTY | Windsor Power | 1 | 05-20-2002 03:53 PM |
Line lock is spinning me in circles... | Chris_H | Windsor Power | 8 | 02-18-2001 08:40 AM |