MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Website Community > Blue Oval Lounge
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 02-01-2006, 10:26 PM   #1
jwboner
Registered Member
 
jwboner's Avatar
 
Join Date: Jun 2001
Location: Under the hood
Posts: 164
Default Reusable air filters

We've all heard of the reusable air filters that use cotton saturated with oil. But has anyone heard of a reusable air filter that doesn't need oiling, just clean and dry?
__________________
65 fastback 347 DFI injected w/vic jr, TFS heads, MSD, cable clutch TKO, 3.70 9", tc subframe conns, custom traction bars, griffen alum radiator, armored fuel cell, and torq thrust D's Retrofitted Prelude seats. Vintage Air underdash kit. Fiberglass here and there too
More on the way all the time.
jwboner is offline   Reply With Quote
Old 02-02-2006, 03:06 PM   #2
Mr 5 0
Conservative Individualist
 
Mr 5 0's Avatar
 
Join Date: May 1997
Location: Wherever I need to be
Posts: 7,487
Default Re: Reusable air filters

Not to my knowledge.

As the 'permanent' K&N-type filters cost around $50. and the re-oiling kits a bit less than $10. in most places, I don't see the point in replacing stock paper filters every 10,000 miles, at around $10. a pop, when you can get better 'performance' from the K&N and, if you keep it long enough, save a few bucks. However, to each his own.
__________________
5.0 Mustang Owner
1990 - 2005
Mr 5 0 is offline   Reply With Quote
Old 02-03-2006, 10:44 AM   #3
HoodStrype
Rearview Mirror Haze
 
HoodStrype's Avatar
 
Join Date: May 1999
Location: Huntsville, Alabama...a.k.a. "HuntsVegas"
Posts: 387
Default Re: Reusable air filters

100% agreed. You can buy the cone filters for cold air tubes but they have to be changed as well and are around $30 a piece or more. They usually lasted my wife and I about a year a piece... but I'd knock it out on the ground every now and then.
__________________
93 lx Notch
01 GT

...the epitome of Murphy's Law
HoodStrype is offline   Reply With Quote
Old 02-03-2006, 05:46 PM   #4
Rev
Registered Member
 
Rev's Avatar
 
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
Default Re: Reusable air filters

There may be others as good as the K&N, but for my $$$, I'll just stick with the originals and clean and reoil as needed.

Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi.

O.B.C. #2


'66 coupe
Rev is offline   Reply With Quote
Old 02-03-2006, 06:49 PM   #5
jwboner
Registered Member
 
jwboner's Avatar
 
Join Date: Jun 2001
Location: Under the hood
Posts: 164
Default Re: Reusable air filters

In my application I use a round air cleaner. I tried a cone and tube but found that I got the air was hotter because the tube ran close to the header and no room to run it anywhere else, so back to the round. I also tried K&N but no matter how little oil I used (less than directions call for) on the filter it got sucked down into the intake system. In my search for reusable filters that have performance in mind I've found cotton gauze, and woven, and foam. The foam doesn't use oil but doesn't seem like a very good filter medium. I have heard of a K&N type filter that's washable, reusable but doesn't need oil, just can't remember who or where. Or maybe I'm dreaming about car stuff too much.
__________________
65 fastback 347 DFI injected w/vic jr, TFS heads, MSD, cable clutch TKO, 3.70 9", tc subframe conns, custom traction bars, griffen alum radiator, armored fuel cell, and torq thrust D's Retrofitted Prelude seats. Vintage Air underdash kit. Fiberglass here and there too
More on the way all the time.
jwboner is offline   Reply With Quote
Old 02-03-2006, 08:05 PM   #6
Rev
Registered Member
 
Rev's Avatar
 
Join Date: Nov 1998
Location: Houston, Tx.
Posts: 3,887
Default Re: Reusable air filters

I think the main things to consider with the K&N filters is the area used in the filtration area and where the inlet for the air intake is located. We want maximum filtrtation area and minimum temperature for the incoming air. Routing for the incoming air should not really be a problem.

Rev
__________________
'66 Coupe, 306, 350-375 HP, C-4, 13.07 e.t., 104.8 mph, 1/4 mi.

O.B.C. #2


'66 coupe
Rev is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
K&N air filters wd1950 Small Ponies 1 12-29-2004 07:29 AM
Question about Mac air filters stevstum Windsor Power 0 08-22-2001 09:26 AM
K%N filters what_import Modular Madness 2 06-01-2001 01:11 PM
KN filters bullitt713 Modular Madness 3 05-29-2001 08:40 AM
Info from C&L about new 76mm and conical filters.. Rick 91GT Windsor Power 8 05-12-2001 01:29 AM


All times are GMT -5. The time now is 08:13 PM.


SEARCH