1988 GT with only 854 miles????

K-9 · 05-30-2001, 02:17 PM

I thought you guys might enjoy this rare find...

See it here -> http://page.auctions.yahoo.com/auction/52187488

Does anyone have $20K I can borrow?

------------------
K-9
No 'Stang just yet, but looking.

red82gt · 05-30-2001, 02:21 PM

The wheels aren't correct, there were no ponys in 88. It would be a nice find but since its a high production muscle car, I wouldn't waste that much money on it.

Unit 5302 · 05-30-2001, 07:03 PM

LOL, "This is the only car in existance known to have these power delete options"

What a crock...

My 87GT has every one of the aforementioned delete options.

854mi is too few, the car is probably suffering from not being used.

QUIN · 05-31-2001, 08:13 AM

there is this little cable that attaches to the transmission via the speedo gear which tracks your mile per hour and miles driven on the tack.
unconnect this and all of our cars could be factory 500 milers.
dont believe everything you see!
ESPECIALLY ON E-BAY!
Q

------------------
Quin, 87 GT,306,forged/cut pistons,edelbrock head\intake,steeda#18cam,1.7rr,MSD Blaster tfi coil,A9L,pro-m75mm,24#inj,accufab65mm,2.5"pipes,hooker headers,dynomax exhaust,3.73 gr,110 lph fp,moroso cold air,ASP pullies, weld rims

See my engine on user rides.

I see your shwartz is as big as mine, now lets see how well you handle it!

Smokedawg · 05-31-2001, 09:13 AM

Yes you can disconnect the cable, but then you have no idea how fast you are going. Mine melted in half when I installed my H-pipe and I didnt pay attention when I hooked it back up to how it was ran. It drove me crazy not being able to know how fast I was going. Exspecially when I was being followed by a cop!

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rare Mustangs....Got One?	1969Mach1	Blue Oval Lounge	22	09-25-2010 04:59 AM
Part out my GT or fix it???	tireburner163	Blue Oval Lounge	18	06-19-2003 12:46 PM
New GT - Wanted a Piece of ME	NO SLO PK	Stang Stories	13	11-28-2002 12:35 PM
Is it possible to pass a 96-98 4.6 gt engine off as a cobra somehow?read!	96_4.6	Modular Madness	20	11-24-2002 10:20 PM
GT and LS-1 get into Tangle. GT WINS!!	Mercury	Stang Stories	8	06-26-2001 12:49 PM

05-30-2001, 02:17 PM	#1
K-9 Registered Member Join Date: May 2001 Location: Elgin, IL, 60120 Posts: 14	1988 GT with only 854 miles???? I thought you guys might enjoy this rare find... See it here -> http://page.auctions.yahoo.com/auction/52187488 Does anyone have $20K I can borrow? ------------------ K-9 No 'Stang just yet, but looking.

05-30-2001, 02:21 PM	#2
red82gt Sober voice of Reason Join Date: Nov 1998 Location: Kelowna, B.C., Canada Posts: 1,514	The wheels aren't correct, there were no ponys in 88. It would be a nice find but since its a high production muscle car, I wouldn't waste that much money on it.

05-30-2001, 07:03 PM	#3
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	LOL, "This is the only car in existance known to have these power delete options" What a crock... My 87GT has every one of the aforementioned delete options. 854mi is too few, the car is probably suffering from not being used.

05-31-2001, 08:13 AM	#4
QUIN Registered Member Join Date: May 1999 Location: Chillicothe, OH. Posts: 1,289	there is this little cable that attaches to the transmission via the speedo gear which tracks your mile per hour and miles driven on the tack. unconnect this and all of our cars could be factory 500 milers. dont believe everything you see! ESPECIALLY ON E-BAY! Q ------------------ Quin, 87 GT,306,forged/cut pistons,edelbrock head\intake,steeda#18cam,1.7rr,MSD Blaster tfi coil,A9L,pro-m75mm,24#inj,accufab65mm,2.5"pipes,hooker headers,dynomax exhaust,3.73 gr,110 lph fp,moroso cold air,ASP pullies, weld rims See my engine on user rides. I see your shwartz is as big as mine, now lets see how well you handle it!

05-31-2001, 09:13 AM	#5
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Yes you can disconnect the cable, but then you have no idea how fast you are going. Mine melted in half when I installed my H-pipe and I didnt pay attention when I hooked it back up to how it was ran. It drove me crazy not being able to know how fast I was going. Exspecially when I was being followed by a cop! ------------------ 347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del