viper race

sedanman · 07-10-2005, 05:24 PM

First off I am 2-0 against vipers going into this race. One of the vipers I beat was stock one had head work and exhaust.

Round 3:

I am at a local hot spot and a white 96ish RT10 pulls in. He had raced my friends whipple car earlier and had lost by a small margin. So we start to BS and I find out that he had the following mods:

Ported and milled heads
544 lift cam
Bigger TB w port matched intake
Flow Tubes
CAI
Long tubes
Borla catback.

So we head out and do a 40 roll race, third honk and we are off. I pull him thru second and shift to third and he starts a slow pull thru third and fourth with me ending up at his back bumper at about 140.

So there you have it I lost to a fully modded viper by a car, I have a 2.8 pulley waiting to go on and a NX kit I have been debaiting putting on.

bmxmon · 07-10-2005, 07:11 PM

I believe vipers have the top end game, but not all that great of 1/4 mile. The quarter mile is well over at 140 though.

EZRIDN · 07-11-2005, 11:02 AM

Cool.....running good. Get a real clutch in it, and get those 11 sec slips...

blue00gt · 07-11-2005, 12:53 PM

Sounds like a good running Cobra. I've always wanted to run a viper after I swapped motors but haven't met up with any so far. How much boost are you making with the 2.93 pulley? I'm thinking a pulley swap is my next mod.

sedanman · 07-11-2005, 11:50 PM

Only 13.8 I plan to swap to a 2.80 very soon

blue00gt · 07-14-2005, 12:03 PM

What brand pulley do you run? I'm trying to figure out what's best. I think I'll go with a 2.93 myself.

sedanman · 07-15-2005, 12:08 AM

I have a south florida no slip DUB setup. It seems to work pretty well, I use a UPR idler. I really like billetflows stuff and would love to do there four piece Idler (probably will this winter).

If you have not done a billetflow diff brace do it ASAP it will save you tons of headache with the rearend very cheap insurance ($169).

fiveohpatrol · 07-16-2005, 11:13 PM

Damn Jeff, where are you out hitting 140? Sounds like a pretty stout car you've got there, its a shame you gave up on the coupe though.

You should bring that thing to the track sometime and line up with me. None of this 40mph roll crap!

take er easy (and try not to kill anyone while street racing)

-Drew

sedanman · 07-17-2005, 08:50 AM

We have started running on major interstates (won't post but we can talk in pm) at like 2 in the morning. Not a car around its awesome you can even do dead digs! Its nice having good brakes it only take a very short time to do this not at all like the days of the coupe when you prayed for the brake gods to save you.

I will have it to the track once I get the new clutch in it. I am hoping for some very low 11's.

blue00gt · 07-19-2005, 12:05 PM

I'm actually running the solid axle out back so no need for the diff brace. I think I need to go to 31 spline axles though. I'm running 4.10s and I want to throw some slicks on it and take it to the track. I'm hoping to get deep into the 11s with some traction and a 2.93 pulley. It ran 12.5@116 on the street tires before with a 1.99 60-ft (stock pulley).

sedanman · 07-21-2005, 11:13 PM

Cool, I can't bring myself to go solid rear. I love the handeling and from time to time I go road racing (this weekend I am doing a porsche club of america event at putnam park).

blue00gt · 07-25-2005, 12:18 PM

Mine is set up for roadracing rather than drag racing too with all the Maximum Motorsports stuff. The only advantage the independent rear has in handling over the solid rear IMO is on bumpy or uneven surfaces since the SN95 chassis was never designed for IRS.
I'm hoping to go to Texas Motor Speedway in October and run this thing on the Roval (Oval + 7-turn roadcourse). It's only $275 for (4) 25-minute sessions including instructors who critique and give pointers after each sesson. Compared to Infineon where I used to live that's dirt cheap.

sedanman · 07-29-2005, 12:12 PM

Just got back this weekend from road racing it and it was awesome, nothing like passing porsches at the road course! I did have a problem sat. night though it blew a fuel line INSIDE the tank so the car died and I had to drop the tank and run new lines.

blue00gt · 07-29-2005, 12:47 PM

So does that LFP Heat Exchanger work well? I know that some folks who don't upgrade the cooling have trouble with heat with more boost and long sessions on road courses.

sedanman · 07-29-2005, 12:50 PM

I did three half hour sessions in 95^ heat and the car did awesome except the last 10min or so of the last session the car lost some power dropping about 5mph maybe 10 on the back straight down to 125 vs 135. That beings said I love it.

EZRIDN · 07-30-2005, 10:14 AM

Quote:

Originally Posted by fiveohpatrol

You should bring that thing to the track sometime and line up with me. None of this 40mph roll crap!

-Drew

------------------

sedanman · 07-31-2005, 10:33 PM

Quote:

Originally Posted by fiveohpatrol

You should bring that thing to the track sometime and line up with me. None of this 40mph roll crap!

one round at your track and one round at mine?

fiveohpatrol · 07-31-2005, 10:50 PM

sounds good to me

Next time I've got the car in Indy for the weekend, I'll give you a call, later

EZRIDN · 08-01-2005, 02:56 PM

What two tracks? Muncie, and IRP?

sedanman · 08-01-2005, 11:01 PM

Quote:

Originally Posted by EZRIDN

What two tracks? Muncie, and IRP?

What ever track he wants plus putnam park a 10 turn road course.

07-10-2005, 05:24 PM	#1
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	viper race First off I am 2-0 against vipers going into this race. One of the vipers I beat was stock one had head work and exhaust. Round 3: I am at a local hot spot and a white 96ish RT10 pulls in. He had raced my friends whipple car earlier and had lost by a small margin. So we start to BS and I find out that he had the following mods: Ported and milled heads 544 lift cam Bigger TB w port matched intake Flow Tubes CAI Long tubes Borla catback. So we head out and do a 40 roll race, third honk and we are off. I pull him thru second and shift to third and he starts a slow pull thru third and fourth with me ending up at his back bumper at about 140. So there you have it I lost to a fully modded viper by a car, I have a 2.8 pulley waiting to go on and a NX kit I have been debaiting putting on. __________________ 04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.

07-10-2005, 07:11 PM	#2
bmxmon Registered Member Join Date: Mar 2004 Location: Minnesota Posts: 950	Re: viper race I believe vipers have the top end game, but not all that great of 1/4 mile. The quarter mile is well over at 140 though. __________________ Alex

07-11-2005, 11:02 AM	#3
EZRIDN Registered Member Join Date: Jan 1999 Location: U.S.A. Posts: 504	Re: viper race Cool.....running good. Get a real clutch in it, and get those 11 sec slips... __________________ '86 GT..5 spd....14.0 @ 98 SOLD '87 GT..5 spd...Stock...14.4 @ 97 SOLD '90 GT Conv. A4 Cream Puff...14.6 @ 94 SOLD '99 Z28..A4..Stock stall, no tuning, all motor, full weight 11.92 @ 117.95 SOLD '03 Centennal Edition GT 5 spd. 1 of 620 5 spd coupes made. http://bradbarnett.net/mustangs/timeline/99-04/03/100th.htm Stock..... 2.02 8.9 13.89 @ 99.03 http://bradbarnett.net/mustangs/timeline/99-04/03/100th.htm

07-11-2005, 12:53 PM	#4
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Re: viper race Sounds like a good running Cobra. I've always wanted to run a viper after I swapped motors but haven't met up with any so far. How much boost are you making with the 2.93 pulley? I'm thinking a pulley swap is my next mod. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

07-11-2005, 11:50 PM	#5
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	Re: viper race Only 13.8 I plan to swap to a 2.80 very soon __________________ 04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.

07-14-2005, 12:03 PM	#6
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Re: viper race What brand pulley do you run? I'm trying to figure out what's best. I think I'll go with a 2.93 myself. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

07-15-2005, 12:08 AM	#7
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	Re: viper race I have a south florida no slip DUB setup. It seems to work pretty well, I use a UPR idler. I really like billetflows stuff and would love to do there four piece Idler (probably will this winter). If you have not done a billetflow diff brace do it ASAP it will save you tons of headache with the rearend very cheap insurance ($169). __________________ 04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.

07-16-2005, 11:13 PM	#8
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Re: viper race Damn Jeff, where are you out hitting 140? Sounds like a pretty stout car you've got there, its a shame you gave up on the coupe though. You should bring that thing to the track sometime and line up with me. None of this 40mph roll crap! take er easy (and try not to kill anyone while street racing) -Drew __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

07-17-2005, 08:50 AM	#9
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	Re: viper race We have started running on major interstates (won't post but we can talk in pm) at like 2 in the morning. Not a car around its awesome you can even do dead digs! Its nice having good brakes it only take a very short time to do this not at all like the days of the coupe when you prayed for the brake gods to save you. I will have it to the track once I get the new clutch in it. I am hoping for some very low 11's. __________________ 04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.

07-19-2005, 12:05 PM	#10
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Re: viper race I'm actually running the solid axle out back so no need for the diff brace. I think I need to go to 31 spline axles though. I'm running 4.10s and I want to throw some slicks on it and take it to the track. I'm hoping to get deep into the 11s with some traction and a 2.93 pulley. It ran 12.5@116 on the street tires before with a 1.99 60-ft (stock pulley). __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

07-21-2005, 11:13 PM	#11
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	Re: viper race Cool, I can't bring myself to go solid rear. I love the handeling and from time to time I go road racing (this weekend I am doing a porsche club of america event at putnam park). __________________ 04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.

07-25-2005, 12:18 PM	#12
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Re: viper race Mine is set up for roadracing rather than drag racing too with all the Maximum Motorsports stuff. The only advantage the independent rear has in handling over the solid rear IMO is on bumpy or uneven surfaces since the SN95 chassis was never designed for IRS. I'm hoping to go to Texas Motor Speedway in October and run this thing on the Roval (Oval + 7-turn roadcourse). It's only $275 for (4) 25-minute sessions including instructors who critique and give pointers after each sesson. Compared to Infineon where I used to live that's dirt cheap. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

07-29-2005, 12:12 PM	#13
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	Re: viper race Just got back this weekend from road racing it and it was awesome, nothing like passing porsches at the road course! I did have a problem sat. night though it blew a fuel line INSIDE the tank so the car died and I had to drop the tank and run new lines. __________________ 04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.

07-29-2005, 12:47 PM	#14
blue00gt Mustang Addict Join Date: Jan 2001 Location: McKinney, TX Posts: 1,294	Re: viper race So does that LFP Heat Exchanger work well? I know that some folks who don't upgrade the cooling have trouble with heat with more boost and long sessions on road courses. __________________ Strike down the unroadworthy! 2000 GT Atl. Blue: '03 Cobra motor - 465rwhp/473rwtq, T-56 6-speed, full MM TA/PH & tubular K-member suspension, Saleen body, 17" Torq-Thrust II's, M/T ET Street radials, and lots more '94 Rio Red Cobra: All the bolt-ons, 3.73s

07-29-2005, 12:50 PM	#15
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	Re: viper race I did three half hour sessions in 95^ heat and the car did awesome except the last 10min or so of the last session the car lost some power dropping about 5mph maybe 10 on the back straight down to 125 vs 135. That beings said I love it. __________________ 04 Screamin Yellow Cobra KB 2.4 (585/556 pump 626/666 race) 00R brakes, DFX clutch, Level 5's, return fuel system, Lts with 3" exhuast, FR500 wheels and all the other fun stuff. GONE 1991 Lx sedan 5.0, 5spd (Liberty proshifted TKO) S-trim, Ported TF heads everything parted out.

07-31-2005, 10:50 PM	#18
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	Re: viper race sounds good to me Next time I've got the car in Indy for the weekend, I'll give you a call, later __________________ NMRA O/C 9516 NA pumpgas stickshift 347 10.65@125.6, 6.73@100, 1.41 60ft

08-01-2005, 02:56 PM	#19
EZRIDN Registered Member Join Date: Jan 1999 Location: U.S.A. Posts: 504	Re: viper race What two tracks? Muncie, and IRP? __________________ '86 GT..5 spd....14.0 @ 98 SOLD '87 GT..5 spd...Stock...14.4 @ 97 SOLD '90 GT Conv. A4 Cream Puff...14.6 @ 94 SOLD '99 Z28..A4..Stock stall, no tuning, all motor, full weight 11.92 @ 117.95 SOLD '03 Centennal Edition GT 5 spd. 1 of 620 5 spd coupes made. http://bradbarnett.net/mustangs/timeline/99-04/03/100th.htm Stock..... 2.02 8.9 13.89 @ 99.03 http://bradbarnett.net/mustangs/timeline/99-04/03/100th.htm

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oct.11 Mid-Mich Toys for Tots Benefit drag race	Doug Dornbos	Ford Show & Go	0	09-29-2003 02:24 PM
MY FIRST RACE!!!	#1 Pony	Stang Stories	7	07-01-2002 07:55 AM
Biggest Race I've Ever Had. 440vs302	Skyman	Stang Stories	51	03-02-2002 05:40 PM
Viper Not Willing To Race!?!	1BadMoFo5.0	Stang Stories	12	05-17-2001 03:52 AM
Best race EVER!! Im still shaking.. :-D	Skyman	Stang Stories	28	02-27-2001 12:05 AM