Oil return line on blower? (Vortech or Paxton only)

buddha · 03-12-2001, 05:37 PM

Hey guys. I've switched blowers and had a question on the location of the hole to be punched on a stock oil pan.

I had a Procharger, so the hole is on the drivers side, and this won't work with my passenger side NOVI. Where does Vortech or Paxton say to punch the hole on the passenger side of the oil pan?

go4it · 03-12-2001, 05:53 PM

1 3/4" below pan lip (where it bolts to the block) and 1/2" to the rear of the first bolt on the side of pan.

------------------
93GT, S-trim, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 30lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, 3 row alum.rad. MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter.

buddha · 03-12-2001, 07:58 PM

Thanks!Thats what I figured, as thats where I punched the hole on the opposite side. Just wanted to make sure.

03-12-2001, 05:37 PM	#1
buddha Registered Member Join Date: Feb 2000 Location: Washington, MO Posts: 327	Oil return line on blower? (Vortech or Paxton only) Hey guys. I've switched blowers and had a question on the location of the hole to be punched on a stock oil pan. I had a Procharger, so the hole is on the drivers side, and this won't work with my passenger side NOVI. Where does Vortech or Paxton say to punch the hole on the passenger side of the oil pan?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to remove Vortech blower pulley?	pete's stang	Power Adders	1	06-23-2004 08:32 PM
Return fuel line on 90 GT (UR .02 cents wanted)	BigCountryGT	Windsor Power	2	03-15-2004 03:20 PM
255 LPH pump...return line pressure too high...ideas??	84LX89GT	Windsor Power	1	05-12-2003 07:31 PM
-8 feed line/ -8 return ????	sn95gt19	Windsor Power	5	12-18-2002 08:03 AM
96 to 98 gt with a vortech blower ,, have a question 4 you !	southernstang97	Modular Madness	8	07-31-2002 05:52 PM

03-12-2001, 05:53 PM	#2
go4it Registered Member Join Date: Sep 1998 Location: Wise,Va. Posts: 248	1 3/4" below pan lip (where it bolts to the block) and 1/2" to the rear of the first bolt on the side of pan. ------------------ 93GT, S-trim, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 30lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, 3 row alum.rad. MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter.

03-12-2001, 07:58 PM	#3
buddha Registered Member Join Date: Feb 2000 Location: Washington, MO Posts: 327	Thanks!Thats what I figured, as thats where I punched the hole on the opposite side. Just wanted to make sure.