How do I run two operating systems on one computer?

Hethj7 · 12-10-2002, 07:04 PM

Well, since my autocad won't work on XP, how hard is it to set up a separate OS (windows 98) on my computer just to run Autocad?

Is it very involved or even worth my time? Knowing my luck, unless this is a proven process, nothing will work on my system if I try this.

thdrcat · 12-10-2002, 09:48 PM

what 2 you wanna run? i assume you have XP, therefore you might have to format/reinstall to get anything non xp or 2000 to work. i will have better instructions once you tell me that.

Hethj7 · 12-10-2002, 10:24 PM

I have XP and want to also run 98 just so that I can use Autocad. But, as said before, if it is a very involved process I may not try it. Computers, modifications, and myself usually don't get along too well.

Plug n' Play.....ha....usually a two hour call to tech support for me. Not because I am too stupid, but some software I am running is usually not compatible with what I am installing.

mustangII460 · 12-10-2002, 11:28 PM

Its not really hard, just fry's alot of brain cells doing it.

Win9x must first be installed on a partition formatted with FAT or FAT32. FAT is usually always the first partition on the hard disk.

Then XP can be installed into its own partition. In that order only.

Microsofts website should have the details. I did it a while back with MS-DOS and XP PRO.

Now my brain hurts.

1969Mach1 · 12-10-2002, 11:54 PM

Download Partition Magic, partition your hard drive into 2 seperate drives. Once this is done you set your primary drive as file format NTFS. This drive will have Windows XP installed on it. Then put in a boot disk go to install Windows 98, select to have it installed on the other drive (so not your primary one) also make sure to set it to Fat or Fat32 (Fat32 is best). Then bam your done. If you need better instructions feel free to ask. This is just a quick answer.

§am.

Hethj7 · 12-11-2002, 12:59 AM

Thanks for the reply guys. I will check out Microsoft's website. I may ask for some more help if I do it, but it already sounds like something I would screw up. If my computer wasn't brand new and running great right now, I may try, but I am kind of hesitant.

1969Mach1 · 12-11-2002, 12:24 PM

My suggestion would be try to find a patch or some info on why it won't run on Windows XP. Software ususally shouldn't have any problems running different O/S like XP. It's usually hardware that won't be compatable but that was old news. Try updating your XP and your Autocad and you should be fine.

§am.

Hethj7 · 12-11-2002, 12:59 PM

I would do that, but I don't know that there is a patch out there. The newest version of Autocad only only runs on XP Pro. The site states they are shifting away from the home user and just to business applications.

Since my Autocad 2000 is an older version, it won't even begin to install itself on my XP system. If you do run across a patch or a solution to this, let me know.

PKRWUD · 12-11-2002, 02:16 PM

I have 4 operating systems on mine (OS 9.2, OS X 10.1, OS X 10.2, and Windows 98), but it's a Mac.

Take care,
~Chris

Shaggy · 12-11-2002, 02:27 PM

I have done a little research here is a patch attached I haven't tried it because autocad runs fine on my xp home so good luck.

as to PKRWD and his mac......

Hethj7 · 12-11-2002, 03:58 PM

Shaggy - What version of Autocad are yoiu using. I am trying to install Autocad 2000, but when I try, it gives me a message saying Autocad doesn't support this OS (XP).

I downloaded the patch and when I ran it the command screen just pops up briefly. I can't even tell what it says on the screen. Should I being getting a prompt or a message on that screen saying the patch was run successfully?

Hethj7 · 12-11-2002, 04:01 PM

Just curious....is that the patch that fixes the expiration problem on the trial version of the new autocad?

Shaggy · 12-11-2002, 04:55 PM

I am running both 14 and 2000. I have no idea what the patch really fixs or looks like doing it because i didn't need it i just found it looking for any compatibility issues on a search.

Hethj7 · 12-11-2002, 08:12 PM

Weird, mine won't install. Maybe since it is not an original copy that may have something to do with it. I will have to do a little research. Thanks for the help though.

12-10-2002, 07:04 PM	#1
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	How do I run two operating systems on one computer? Well, since my autocad won't work on XP, how hard is it to set up a separate OS (windows 98) on my computer just to run Autocad? Is it very involved or even worth my time? Knowing my luck, unless this is a proven process, nothing will work on my system if I try this. __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

12-10-2002, 10:24 PM	#3
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	I have XP and want to also run 98 just so that I can use Autocad. But, as said before, if it is a very involved process I may not try it. Computers, modifications, and myself usually don't get along too well. Plug n' Play.....ha....usually a two hour call to tech support for me. Not because I am too stupid, but some software I am running is usually not compatible with what I am installing. __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

12-10-2002, 11:28 PM	#4
mustangII460 Factoy Five Roadster Join Date: May 2000 Location: Sevier Co,Tennessee Posts: 1,681	Its not really hard, just fry's alot of brain cells doing it. Win9x must first be installed on a partition formatted with FAT or FAT32. FAT is usually always the first partition on the hard disk. Then XP can be installed into its own partition. In that order only. Microsofts website should have the details. I did it a while back with MS-DOS and XP PRO. Now my brain hurts. __________________ Frank

12-10-2002, 11:54 PM	#5
1969Mach1 HEY I CAN SET A NAME NOW! Join Date: Oct 2001 Location: Ontario, Canada Posts: 2,556	Download Partition Magic, partition your hard drive into 2 seperate drives. Once this is done you set your primary drive as file format NTFS. This drive will have Windows XP installed on it. Then put in a boot disk go to install Windows 98, select to have it installed on the other drive (so not your primary one) also make sure to set it to Fat or Fat32 (Fat32 is best). Then bam your done. If you need better instructions feel free to ask. This is just a quick answer. §am. __________________ 1969 Mustang Mach 1Sold 351-4V Windsor, 4 Speed MACH 1 - Moving At The Speed Of Sound. 1979 Mustang Indianapolis 500 Pace Car For Sale - Email me for Info 302-2V, 3-Speed Auto One of 2,106 made One of 405 sent to Canada. Yes those are caution lights, and No you can't pass me when there on. Ricer Hater's Club - Member #4

12-11-2002, 12:59 AM	#6
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Thanks for the reply guys. I will check out Microsoft's website. I may ask for some more help if I do it, but it already sounds like something I would screw up. If my computer wasn't brand new and running great right now, I may try, but I am kind of hesitant. __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

12-10-2002, 09:48 PM	#2
thdrcat Registered Member Join Date: Jul 2002 Posts: 100	what 2 you wanna run? i assume you have XP, therefore you might have to format/reinstall to get anything non xp or 2000 to work. i will have better instructions once you tell me that.

12-11-2002, 12:24 PM	#7
1969Mach1 HEY I CAN SET A NAME NOW! Join Date: Oct 2001 Location: Ontario, Canada Posts: 2,556	My suggestion would be try to find a patch or some info on why it won't run on Windows XP. Software ususally shouldn't have any problems running different O/S like XP. It's usually hardware that won't be compatable but that was old news. Try updating your XP and your Autocad and you should be fine. §am. __________________ 1969 Mustang Mach 1Sold 351-4V Windsor, 4 Speed MACH 1 - Moving At The Speed Of Sound. 1979 Mustang Indianapolis 500 Pace Car For Sale - Email me for Info 302-2V, 3-Speed Auto One of 2,106 made One of 405 sent to Canada. Yes those are caution lights, and No you can't pass me when there on. Ricer Hater's Club - Member #4

12-11-2002, 12:59 PM	#8
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	I would do that, but I don't know that there is a patch out there. The newest version of Autocad only only runs on XP Pro. The site states they are shifting away from the home user and just to business applications. Since my Autocad 2000 is an older version, it won't even begin to install itself on my XP system. If you do run across a patch or a solution to this, let me know. __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

12-11-2002, 02:16 PM	#9
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	I have 4 operating systems on mine (OS 9.2, OS X 10.1, OS X 10.2, and Windows 98), but it's a Mac. Take care, ~Chris __________________ Webmaster: Rice Haters Club Jim Porter Racing Peckerwoods Pit Stop Support Your Local RED & WHITE!

12-11-2002, 03:58 PM	#11
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Shaggy - What version of Autocad are yoiu using. I am trying to install Autocad 2000, but when I try, it gives me a message saying Autocad doesn't support this OS (XP). I downloaded the patch and when I ran it the command screen just pops up briefly. I can't even tell what it says on the screen. Should I being getting a prompt or a message on that screen saying the patch was run successfully? __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

12-11-2002, 04:01 PM	#12
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Just curious....is that the patch that fixes the expiration problem on the trial version of the new autocad? __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

12-11-2002, 04:55 PM	#13
Shaggy Registered Member Join Date: Feb 1999 Location: Houston,TX Posts: 466	I am running both 14 and 2000. I have no idea what the patch really fixs or looks like doing it because i didn't need it i just found it looking for any compatibility issues on a search. __________________ A good plan, violently executed now, is better than a perfect plan next week. George S. Patton, General (1885-1945)

12-11-2002, 08:12 PM	#14
Hethj7 Mizzou Tigers Join Date: Apr 1999 Location: weston, MO United States Posts: 1,455	Weird, mine won't install. Maybe since it is not an original copy that may have something to do with it. I will have to do a little research. Thanks for the help though. __________________ 2006 Mustang GT 1990 LX GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved) 1998 Contour SVT Rice Haters Club Member #244

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
supercharger kit for 03 gt	03GT	Modular Madness	9	05-29-2003 06:38 PM
Here ya go Sky...	PKRWUD	Blue Oval Lounge	9	09-23-2002 09:01 PM
Ready for 42 Volt Automotive Systems?	PKRWUD	Windsor Power	7	05-12-2002 11:01 AM
A9L Computer	nextime	Windsor Power	14	03-27-2002 10:36 PM
Computer Question??	GhOsT6_9	Modular Madness	0	03-05-2001 08:16 PM