MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar

Notices


Reply
 
Thread Tools Rate Thread Display Modes
Old 07-22-2004, 05:40 PM   #1
LincoConti87
Registered Member
 
LincoConti87's Avatar
 
Join Date: Dec 2000
Location: Tallahassee,Florida,USA
Posts: 188
Question Tips on buying an 87 GT(is it really a GT?)

Well on sunday it looks like I will be driving about an hour and a half away to hopefully purchase an 87 GT. The seller did not have pictures but told me everything about it he could through emails. He says the car was a shell when he got it but that it was an original GT 5spd car which would be just how I want it and he put in a 84 GT T5 and 87 HO motor.Yea I know 84 T5 isnt the best but if it breaks I'll save for tremec

Anyhow I figured I should at least find out the cold hard factuals on how to make positive that it was originally a 5.0 GT 5 spd from factory. Is there any tell tale things I should look for without looking at the vin and door tag, and also whats the best resource for vin and door tag info that will help me determine. One resource I found listed a 87 GT with the same body code as an 87 LX hatch which would not help anything because it just means the car was a hatch and does not prove it was a GT. I just wanna make sure I dont get the wool pulled over my eyes for a 4bang GT body convert because I have seen plenty of them on corral and stangnet.

Would a foglight switch and harness be conclusive? Did all the 87 up GT cars come with the sporty type seats with adjustable lumbar and all that? Any of this kind of info would help.
__________________
1987 Lincoln Continental
1987 Mustang GT
LincoConti87 is offline   Reply With Quote
Old 07-22-2004, 06:38 PM   #2
200k5oh
Registered Member
 
Join Date: Sep 2003
Location: Hometown, il
Posts: 30
Default

i believe the 87 GT's had a different interior than the lx's.
I used to own an 88LX 5.0 and it was basically the same thing as the 4cyl aside from teh engine trans rear end etc.

all i can suggest is try to search for interior pics from an 87lx and an 87 GT.
their has to be something in teh vin that indicates whether it was an orig. 5.0 car or not.
__________________
86 stang-sold
200k5oh is offline   Reply With Quote
Old 07-22-2004, 06:39 PM   #3
RPM427
Registered Member
 
RPM427's Avatar
 
Join Date: Aug 2001
Location: Huntington NY
Posts: 573
Default

Why do you care if it was origanlly a GT or a 4 banger? The car has been chopped and thrown back together either way.

If you give me the VIN (should be on a plate thats visable in the lower right part of the windshield), I can tell you exactly what the car is.
__________________
-1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway


-1994 Ranger w/ 427cid windsor (daily beater)
check it out!
RPM427 is offline   Reply With Quote
Old 07-22-2004, 08:23 PM   #4
LincoConti87
Registered Member
 
LincoConti87's Avatar
 
Join Date: Dec 2000
Location: Tallahassee,Florida,USA
Posts: 188
Default

Well actually it was not chopped and thrown back together. Unless I misunderstood it merely had the motor and tranny missing and replaced. The reason I care is that a 4bang had a bunch of undesireable parts that may not be obvious to most people(me). Sure I would be able to tell if it had an 8.8 or not but when it comes to suspension and brakes and what not it would be hard to tell. I dont have the vin yet but from what I read the engine code on door tag should read either E or M for 5.0HO which would basically prove it to be a V8 car to start with whether LX or GT because thats no big deal. I guess I can just look at a basic Ford vin decoder to get an idea as well. Was kind of hoping for a resource that would explain all the stuff. Every once in a while one of the stang mags puts one out. I had one but I think I tossed it.
__________________
1987 Lincoln Continental
1987 Mustang GT
LincoConti87 is offline   Reply With Quote
Old 07-22-2004, 09:01 PM   #5
RPM427
Registered Member
 
RPM427's Avatar
 
Join Date: Aug 2001
Location: Huntington NY
Posts: 573
Default

When I heard "Shell" I normally think of a car completely stripped of its running gear.
__________________
-1993 Mustang, 900rwhp 03-04 cobra based 4v swap, full Griggs setup, project underway


-1994 Ranger w/ 427cid windsor (daily beater)
check it out!
RPM427 is offline   Reply With Quote
Old 07-22-2004, 09:25 PM   #6
LincoConti87
Registered Member
 
LincoConti87's Avatar
 
Join Date: Dec 2000
Location: Tallahassee,Florida,USA
Posts: 188
Default

Well he told me shell but said it had front suspension and rear end in it with 4.10s.
LincoConti87 is offline   Reply With Quote
Old 07-23-2004, 08:18 AM   #7
crazypete
Registered Member
 
crazypete's Avatar
 
Join Date: Sep 2002
Location: Boston
Posts: 592
Default

My humble opinion is that it doesnt matter what it used to be, it matter what it is now. Most of the factory stuff 4cyl/8cyl is crap and gets replaced very fast by the owners. If this stang has mods then the previous owner did some of your work for you =)

That said....

I owned an 87 LX 5.0 and a 91 gt 5.0 and they are _identical_. I took both cars apart to BITS AND PIECES and all the bits and pieces are exactly the same. The only difference is some ground fx and a light bar for the GT and the GT seats have a little lumbar motors in them only. The foglight switch, if it is an actual switch and not a dummy fake switch, is also only in the GT's but the switches burn out all the time and most stangers have gone through a couple replacements, usually getting the double switch along the way. That's about it. All mustangs come pre-wired for all accessories even if not installed. I found random empty harnesses all over my 87 lx 5.0. Probably if it has cruise control, it was a GT originally.

Now...

The 4 banger had different springs up front and a weaker rear axle (7.9 inch?) BUT if it has 4.10's then I assume it was upgrded to an 8.8 since I dont think the 7.9(?) has many gear kits for it. I think the 4 banger also had a smaller swaybar. Bottom line: does the body roll and does the suspension feel right? I used the 4 cyl t-5 for years and whaled on it. It will hold for quite a while if you dont put stickies on it. As for the engine controls, if it has the 5.0 HO motor, then it has the ECU and all necessary sensors and wiring.
__________________
91 GT Carb conversion, holley 600 double pumper, edelbrock performer intake, FMS "C" drop springs, march 1000 underdrive pullies, crane 1.7 roller rockers, GT-40P headers, bassani x pipe, american thunder catback, FMS 4.56's, msd aL6, trunkmount battery, A/C eliminator kit, 3000 stall tci streetfighter, AOD with transgo kit, A+ servo, 300M hardened lockup shaft, kevlar bands and 28,000 gvw trans cooler, 3 core radiator, 300 lbs stripped with a full interior
crazypete is offline   Reply With Quote
Old 07-23-2004, 04:02 PM   #8
LincoConti87
Registered Member
 
LincoConti87's Avatar
 
Join Date: Dec 2000
Location: Tallahassee,Florida,USA
Posts: 188
Default

Yea a guy I know has been running a T5 behind a gt40 setup on a 351w on small shot of juice and yea they break but it seemed to hold up for a while and that was with drag radials. Hoping it would be ok for a while.
__________________
1987 Lincoln Continental
1987 Mustang GT
LincoConti87 is offline   Reply With Quote
Old 07-23-2004, 07:23 PM   #9
Hethj7
Mizzou Tigers
 
Hethj7's Avatar
 
Join Date: Apr 1999
Location: weston, MO United States
Posts: 1,455
Default

Quote:
Originally posted by crazypete


I owned an 87 LX 5.0 and a 91 gt 5.0 and they are _identical_. I took both cars apart to BITS AND PIECES and all the bits and pieces are exactly the same. The only difference is some ground fx and a light bar for the GT and the GT seats have a little lumbar motors in them only.


I bet the steering wheels are different . In 1990 they started putting air bags in them.

Also, my LX has lumbar motors, so that was not exclusive to the GT (I wasn't sure if that is what you were saying or not, or if you were just mentioning the fact that your GT had them).
__________________
2006 Mustang GT

1990 LX
GT-40 motor 262 horsepower, 307ft-lbs (sold but forever loved)

1998 Contour SVT

Rice Haters Club Member #244
Hethj7 is offline   Reply With Quote
Old 07-23-2004, 08:08 PM   #10
LincoConti87
Registered Member
 
LincoConti87's Avatar
 
Join Date: Dec 2000
Location: Tallahassee,Florida,USA
Posts: 188
Default

The main thing I was trying to say is not the diff of LX versus GT but rather 4cyl LX versus GT. I just figured on some kind of stuff that would absolutely only appear on a 2.3 car that would set it off from an 5.0 car. Here is a good question though. I just got done looking at an 89 GT in town and it only had the 85 mph speedo. I thought 89 started the 140 or was it that in 89 they began using the 140 after they ran out of 85's. I think I remember hearing that.

Anyhow I guess its not really worth worrying about because what are the chances they would have done such a thing and then go through all the trouble of fibbing about it. I seriously doubt it but I just feel that it would be foolish to not at least entertain the notion.
LincoConti87 is offline   Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Are all 8.8 rears the same? 82 GT Windsor Power 29 08-23-2004 01:06 PM
'02 GT Drop top Vs. '94 Cobra EZRIDN Stang Stories 3 03-26-2004 04:23 PM
'87-'93 GT and GT Cobra Trefty Windsor Power 12 12-04-2003 05:08 PM
Part out my GT or fix it??? tireburner163 Blue Oval Lounge 18 06-19-2003 12:46 PM
GT and LS-1 get into Tangle. GT WINS!! Mercury Stang Stories 8 06-26-2001 12:49 PM


All times are GMT -5. The time now is 08:02 AM.


SEARCH